thanks for the zoom in on the video... I changed my SSD and the tiny ribbon went lose on my left joystick and the LED wasn't working. This helped me figure it out lol
HandheldDIY. Comes with all the tools and they have a sale going on right now. Ships from China but I got mine in 2 weeks or so. They seem high quality and come with a shield to combat interference. I’m literally watching this right now to replace mine. Decided to upgrade because my left stick only registers up and down movement.
how's your calibration after this install? seen report on amazon link that says impossible to calibrate full range. my guess is it's a different resistance range made for a different device altogether. they also show shielding foil on the amazon page for installing these so they don't interfere with the triggers. seems like hodge podge
You should be prying it at the bottom as when you loosen the small screw the bottom of the case lifts up giving you enough gap to pry it with your pry tool. Asus designed it that way. Sheesh, a lot of tutorial that I see on UA-cam don't know about this.😮
I would, doesn't have to be Hall Effect either. Plus theirs websites that sell official rog ally joysticks like en.accessoires-asus.com/ally-console/, which is official ASUS partner.
I have a similar problem. My left thumb stick only goes up and down now. Seemingly Hall Effect thumb sticks on the left are not the best idea due to interference.
Woo!! Thank you for the clear and easy to follow video🙏🏼 Swapped out both joysticks since they no longer worked. Now both are good as new 😄
thanks for the zoom in on the video... I changed my SSD and the tiny ribbon went lose on my left joystick and the LED wasn't working. This helped me figure it out lol
There have been plenty of reports the hall affects dont work right because of the hall affect triggers then interfere with each other
It can be fixed with a software configuration of the dead zone, I haven't done it in mine, but I saw a video showing exactly that
@@jhonRamirez77I thought it was cuz of the magnets.. how would software configuration fix that?
I just installed mine by looking at your video taught me a lot, never have touched electronics before this lol
Seems alot of owners on reddit say they regretted the mod and reverted.
If your analog isn't broken what's the point of this upgrade? I heard problems that this upgrade can cause on the Ally. Does this confirm ?
So where is the after performance test?
THANKS FOR THE VID BUD GREAT STUFF
Does the Hall sensor joystick not move when you press the L-trigger?
Parabéns pelo canal, o vídeo foi perfeito! Consegui ver detalhes que outros tutoriais não mostram ❤
Is it ok to apply hollow joysticks? I mean what about the triggers? Would they not be affected (interfere)?
excellent tutorial i had no idea it was possible to do this
Glad you liked it :)
Where i can get original or good copy of the joystick itself the thumb black grippy thing
How do you get the cap off itself? They seem stuck on
do you need to re-calib it again?
anw, cool, thanks for your tutorial.
Can someone possibly link where they got their whole effect drum sticks? I just want to make sure I get the correct kind for the ROG ally
HandheldDIY. Comes with all the tools and they have a sale going on right now. Ships from China but I got mine in 2 weeks or so. They seem high quality and come with a shield to combat interference. I’m literally watching this right now to replace mine. Decided to upgrade because my left stick only registers up and down movement.
this canf fix stick drift?
Big thx from rog ally Gang. ❤
Can I replace the right joystick with the left joystick?
What happen if i forget to disconnect the battery and change the sticks?
Hope we get dualsense like joysticks in gen 2 rog ally. 🎉
Nah. Human thumbs are convex. NOT CONCAVE.
how's your calibration after this install? seen report on amazon link that says impossible to calibrate full range. my guess is it's a different resistance range made for a different device altogether. they also show shielding foil on the amazon page for installing these so they don't interfere with the triggers. seems like hodge podge
it's actually interference from the magnets in the triggers
You should be prying it at the bottom as when you loosen the small screw the bottom of the case lifts up giving you enough gap to pry it with your pry tool. Asus designed it that way. Sheesh, a lot of tutorial that I see on UA-cam don't know about this.😮
Do you need to solder?
Thanks for the video!
Anyone in San Diego area that can help me with this ?
i wonder if upgrading my ally joystick will fix the joystick problem many people are having... (Left joystick is working but not left and right)
I would, doesn't have to be Hall Effect either. Plus theirs websites that sell official rog ally joysticks like en.accessoires-asus.com/ally-console/, which is official ASUS partner.
I have a similar problem. My left thumb stick only goes up and down now. Seemingly Hall Effect thumb sticks on the left are not the best idea due to interference.