I had the exact same problem! I even uploaded yestarday 2 videos of the problem with my x5c drone and i found your video!! Just ordered the board! thanks!!! Let me know if you saw my video :) thanks!
Estou com o mesmo problema, ele ficava voando até 7 minutos mas depois de uns dias para cá ele começou a dar uns balanço no voo e agora ficou todo desgovernado e nem sai do chão, vou trocar a placa dele também Quantas vezes vc já voou com esta placa nova sem ter mais problemas?
Hi Adma is the original board sm x5 r v5 and did you replace it with the sm x5 r v6 I find the v6 isn't as good as the v5 and you cant get the v5 board anymore.
For some reason one of the traces blew on my receiver board and I could have easily bridged it but managed to find a dirt cheap X5HC board that has altitude hold so figured I may as well fit that giving me an extra useful feature.
I have a stupid question: in reassembling my X8W I got the motors mixed up. How call I tell which are clockwise and which are counterclockwise and which motor goes where?
My Syma X5C1 explorer motor mount is warped. Result is my motor and the little gear on the motor isn't lined up like it should be to fly correctly. I'm trying to avoid buying any parts. I've tried heating up the plastic and re-aline it but didn't work. Know any tricks I can do to achieve this goal?
Hi, my syma`s motor stopped working, so I bought a replacement, but whenever the cables come in contact with the receiver the motor starts running, even if it is off. I ordered another board, and with another motor it happened the same. How do I solve this issue? Thank you.
I had the exact same problem! I even uploaded yestarday 2 videos of the problem with my x5c drone and i found your video!! Just ordered the board! thanks!!! Let me know if you saw my video :) thanks!
Bhaii plz reply karna iss ka range kitna hh?? Plz reply....
Estou com o mesmo problema, ele ficava voando até 7 minutos mas depois de uns dias para cá ele começou a dar uns balanço no voo e agora ficou todo desgovernado e nem sai do chão, vou trocar a placa dele também
Quantas vezes vc já voou com esta placa nova sem ter mais problemas?
***** ola amigo tambem estou çom esse problema voçe já troçou a plaça dele?
Will the transmitter work with the new reciever board?
It does mather the positions of the cables when you glue it? Ex white left black right?
did that board come with the camera connector already soldered?
THANKS
Hi Adma is the original board sm x5 r v5 and did you replace it with the sm x5 r v6 I find the v6 isn't as good as the v5 and you cant get the v5 board anymore.
which battery you used
For some reason one of the traces blew on my receiver board and I could have easily bridged it but managed to find a dirt cheap X5HC board that has altitude hold so figured I may as well fit that giving me an extra useful feature.
I own the X5C and had the same issues. It turned out to be the antenna wire length in the transmitter.
Chasn, how did the antenna look inside the quad itself?
It was lying flat on the flight controller and is only about an inch long. I straightened it out and stood it up, but it does not fly any further.
It won't fly any further that way, I made another comment on a different post that I'm sure you'll see how to fix it so you get 100 yards or so.
Thanks Pat, I will check out your other comment.
Can i use this board for lhx 20 drone
Is there a sync process that needs to be done after you replace the board to get the controller to detect the new receiver board?
+Brian Lanham No special process for a new receiver board, it's same with the old receiver board
+Adma aprilian is the board the same as the striker spy drone?
Thank you so much for uplaod this video :D
from which website did you order this receiver board
please tell me the website sir plz
AliExpress or bandgood
+kushagra the gamer banggood
I have a stupid question: in reassembling my X8W I got the motors mixed up. How call I tell which are clockwise and which are counterclockwise and which motor goes where?
I never received a response so suffice it to say that eventually figured it out.
My Syma X5C1 explorer motor mount is warped. Result is my motor and the little gear on the motor isn't lined up like it should be to fly correctly. I'm trying to avoid buying any parts. I've tried heating up the plastic and re-aline it but didn't work. Know any tricks I can do to achieve this goal?
Hi, my syma`s motor stopped working, so I bought a replacement, but whenever the cables come in contact with the receiver the motor starts running, even if it is off. I ordered another board, and with another motor it happened the same. How do I solve this issue? Thank you.
Rafael Castillo if it happens when the transmitter is turned on, the possibility of problems exist in the transmitter.
nope even with the transmitter off...
You soldered something incorrectly...got a connection wrong.
How to get the circuit board
Gan itu x5c-1 mosfetnya jenis apa? Mohon respon
What's Called In That Glue?Or Glue Gun?Or Else Plss Answeeerrrr
Apakah sm-x5-r v5/v3/v2... bisa d gunakan untuk semua remote jenis x5c?
Wilgo Fariana sepertinya bisa, karena receiver yg saya pasang versinya berbeda dengan yg aslinya.
Bang itu ente PCB vol berapa....kok punya ane baru beli tuh PCB nya kaga konek ya ke remote...kedip Mulu tuh lamp nya....saran dong masa broo
All of sudden my syma x5c stopped connecting to the remote and the lights on it keeps flashing! Please help!
motor sudah saya ganti semua 4 unit dengan yang baru, yg 2 berputar normal, yg 2 spt kehilangan power, apakah ada problem dgn receiver nya
bro klu resiver x5uw belinya di mana yah
Kalau beli receivernya hj14 bisa nyambung ke remot bawaan dron nya
wen buy receiver board and motor
I used to hate syma's but now I own a x8c and I love it. but the syma x5sc is massively underpowered
I fly all my drones with happy.
I HAVE TO BUY REMOTE OF IT
wen buy receiver board and motor