Step 15 of the directions say "Test the light for run, turn and brake function" I have no brake function coming from either side. Everything else is just fine with the install and pretty simple click and go I am I have done nothing incorrect. Any ideas??
I am not a fan from how the wire is going, over the exhaust pipe and in a sticky cabletie. Can the wire not go to the back of the bike and feed the wire behind the plastic rear saddlebag cover where also can lights be mounted from pathfinder led or other manufacturars? The ones that seem original but they are mounted just in place off the black low plastic piece.
Hi there, our installation instructions have been solid and haven’t heard or seen any issues with the wire routing. The wire installation can be changed if you feel it’s better for your motorcycle. Caution must be used so the wire don’t get pinched within the bodywork and it’s probably supported.
@@ciro3d_goldstrike3d Thank You for quick answer, i am just a bit worried that the cabletie should come lose and then the cable comes onto the exhaust. Thats why i asked if the cable can be routed elsewhere. But i trust you when you tell me that there are no problems so far.
Hi Rod, yes, we will have our Goldstrike product line with Niehaus Cycles at Wing Ding along with one of our product designers and a technician doing installations!
No, No, No... Had To Vote You Down... You Spent 2 Seconds On The Most Important Part.. Pluging In The Wires.. WHERE? What Do You Mean There Are 4 Up There??.. Poorly Done Dude.. You Assume Too Much.. Slow......Down.... 1+ 1 = 2.. Watch Cruiseman.. And Learn.
100%. If you are going to wind any time setting up a video and calling it an installation have the firefight to take the time and do the entire installation. That’s what a product installation means.
Great product , I like the quality as well
Step 15 of the directions say "Test the light for run, turn and brake function" I have no brake function coming from either side. Everything else is just fine with the install and pretty simple click and go I am I have done nothing incorrect. Any ideas??
I am not a fan from how the wire is going, over the exhaust pipe and in a sticky cabletie. Can the wire not go to the back of the bike and feed the wire behind the plastic rear saddlebag cover where also can lights be mounted from pathfinder led or other manufacturars? The ones that seem original but they are mounted just in place off the black low plastic piece.
Hi there, our installation instructions have been solid and haven’t heard or seen any issues with the wire routing. The wire installation can be changed if you feel it’s better for your motorcycle. Caution must be used so the wire don’t get pinched within the bodywork and it’s probably supported.
@@ciro3d_goldstrike3d Thank You for quick answer, i am just a bit worried that the cabletie should come lose and then the cable comes onto the exhaust. Thats why i asked if the cable can be routed elsewhere. But i trust you when you tell me that there are no problems so far.
Are you (Goldstrike) going to be represented at the Wing Ding or any other rally?
Hi Rod, yes, we will have our Goldstrike product line with Niehaus Cycles at Wing Ding along with one of our product designers and a technician doing installations!
No, No, No... Had To Vote You Down... You Spent 2 Seconds On The Most Important Part.. Pluging In The Wires.. WHERE? What Do You Mean There Are 4 Up There??.. Poorly Done Dude.. You Assume Too Much.. Slow......Down.... 1+ 1 = 2.. Watch Cruiseman.. And Learn.
Yes, Cruiseman is much more detailed with videos. In fact this video barely shows the installed and lit light at the end.
100%. If you are going to wind any time setting up a video and calling it an installation have the firefight to take the time and do the entire installation. That’s what a product installation means.
N