May design ako sa utak ko boss sek, bale 2 speed (hi/low) transmission addon para sa mga motor. Naka pwesto sa swingarm or sa may itaas ng makina (kung katulad ng style ng Kawasaki HD3 ang makina) this design can aid the scrambler setup engines. Kumbaga pwede na siyang maging on road at off road dahil dito. 15-13 high 14-16 low. Search nyo yung 2 speed gokart transmission sa UA-cam. Same principle pero smaller in size.
Very nicely Engineered and built ! My biggest concern would be overall longevity as the bicycle parts like bearings and races aren’t engineered to be under the same demands a winch would be Under although i guess on that note many of those parts would be inexpensive and fairly easy to replace as needed too !
This is the 2nd manual winch i made, and this time it got a break feature. -Thanks for the people out there who suggest putting a bicycle break in the project.👏👏👏 -Have a great day guys 😁😁😁
Дружище всё отлично но та звёздочка что на длинной шпильке на осях не имеет подшипников. Протрётся шпилька и раздолбит отверстия и будет не совсем хорошо. Надо что то сделать.👍👍👍 Freund ist alles in Ordnung, aber das Kettenrad, das auf dem langen Bolzen auf den Achsen keine Lager hat. Der Bolzen wird gerieben und die Löcher zersplittert und wird nicht ganz gut sein. Wir müssen etwas tun.
Some other channel posted your video out there did you know that? Un otro channel puso su video en youtube tambien, no se si sabes de esto pero queiria decierte en chance que no sabes, disculpa que no se bien como hablar en espanol soy Americano
The idea is very nice but the workmanship is hopeless and could be dangerous. Looking at 11:14 with that main shaft taking all the load in open slot, slanting down and only two nuts holding the load in that manner, I would have added some protection so that the main shaft would be better fitted even if it a case of recessing some material in the side mounting to capture the nut in a better fashion. All the bearings should have been sleeved and well lubricated.
Tu eres un maestro amigo , porque tu lo haces paso a paso y asi uno puede aprender y gracias por compartir tu sabiduria amigo
من سوريا أشكرك وأقدر عملك هذا أنت مبدع .
Very nice build, The only things I would change 1: add chain guard in front, 2: put some brass bushings on the input shaft when I build mine! Thanks.
Nice bro
May design ako sa utak ko boss sek, bale 2 speed (hi/low) transmission addon para sa mga motor. Naka pwesto sa swingarm or sa may itaas ng makina (kung katulad ng style ng Kawasaki HD3 ang makina) this design can aid the scrambler setup engines. Kumbaga pwede na siyang maging on road at off road dahil dito. 15-13 high 14-16 low.
Search nyo yung 2 speed gokart transmission sa UA-cam. Same principle pero smaller in size.
Very nicely Engineered and built ! My biggest concern would be overall longevity as the bicycle parts like bearings and races aren’t engineered to be under the same demands a winch would be Under although i guess on that note many of those parts would be inexpensive and fairly easy to replace as needed too !
Well done Cabalen👌👍
Salamat kabalen
This is the 2nd manual winch i made, and this time it got a break feature.
-Thanks for the people out there who suggest putting a bicycle break in the project.👏👏👏
-Have a great day guys 😁😁😁
Buy a diferential chain hoist ,those can lift heavy loads and are not that expensive.
Woow nice bro 👍👍
Simply outstanding! I love the fast forward hammering and welding sounds😂👍👍👍
تشکر از اینکه به اشتراک گذاشتید.
بسیار عالی و فوق العاده❤
اما خواهشِ از جوشکاری کمتر فلم برداری کنید.
موفق باشید❤❤❤❤❤❤
Interesting! We posted this video on our homemade tools forum last week :)
Des mudo
Excellent keep up with the projects
Thanks bro
Fantastic job, dude! Really nicely done! 😃
Excellent bro
Nice job using the bicycle parts to get some serious reduction.
Чудовий задум, гідна робота!
that's mah boi!!
Good idea and a nice job ! 👌 👍
Good job
Thats ma bebe! 😄
Thanks maam
Great now I need a new bike
Makabilib ka talaga par
Salamat pu
Parabéns ficou show
Superlike 👍👍👍
Legal também estou desenvolvendo uma parecida com freio d moto
Very smart
Excellent you are very good
Best work thanks for scharing mr
Scaring? 😂
Ayos Boss!
May shop po b kayo? Kumpleto kasi sa gamit eh.
Wala pa ako shop sir working palang
guapo ka gayam manong 😁
Tssss
Maybe a simple elevator for two floors and for one person for example
the pin will be erased dangerously it is necessary to install on the bearing
interesting....ive never seen a bicycle hub come apart like that....where can i get some plz
my idol eversince
👍👍👍
💡 Bu düzenekle bisiklet rampa yokuş kolay çıkar .!💡
Good 👍👌
merci pour cette video
Дружище всё отлично но та звёздочка что на длинной шпильке на осях не имеет подшипников. Протрётся шпилька и раздолбит отверстия и будет не совсем хорошо. Надо что то сделать.👍👍👍
Freund ist alles in Ordnung, aber das Kettenrad, das auf dem langen Bolzen auf den Achsen keine Lager hat. Der Bolzen wird gerieben und die Löcher zersplittert und wird nicht ganz gut sein. Wir müssen etwas tun.
I love your video and work are you willing to sell .I am interested in your minilathe and this product
Vừa đẹp vừa chuẩn....ngưỡng mộ bạn....bán cho mình một chiếc với
Nice 👌👍😍❤️💋💋
Some other channel posted your video out there did you know that? Un otro channel puso su video en youtube tambien, no se si sabes de esto pero queiria decierte en chance que no sabes, disculpa que no se bien como hablar en espanol soy Americano
Exelent!!!''
saan ka bumibili ng mga gamit mo pang butas at drill bit
what is the diameter of wire rope you used
How does it go either directions?
Homemade crane? Could possibly attach this to it?
Yes it can.
@@SekAustria Do you have a crane in particular or do you think any would suffice?
Does he make $45 per hour? People in the US with those skills do.
face reveal?
Pake bor kuat berapa kilogram
👍💯👏👏👏👏👏👏
The idea is very nice but the workmanship is hopeless and could be dangerous.
Looking at 11:14 with that main shaft taking all the load in open slot, slanting down and only two nuts holding the load in that manner, I would have added some protection so that the main shaft would be better fitted even if it a case of recessing some material in the side mounting to capture the nut in a better fashion. All the bearings should have been sleeved and well lubricated.
Berapa kekuatan rem tersebut?
Sir magkano po it Kung oorderin?
Di po for sale e
🐼🌹😊👍
👍🍷
Es mas barato y simple comprar uno ya hecho de fabrica
Tu eres un maestro amigo , porque tu lo haces paso a paso y asi uno puede aprender y gracias por compartir tu sabiduria amigo
👍👍👍