DIY PEDALS FOR DRIVING SIMULATOR
Вставка
- Опубліковано 18 вер 2024
- DIY PEDALS FOR DRIVING SIMULATOR
DIY Materials :
1. PVC Sheet Size.3 x 15 cm Thick 5 mm
2. PVC Sheet Size.3 x 18 cm Thick 5 mm
3. Bearing Type.626
4. Bolt M3 x 1.5 cm + Nut
5. Cover Pedals XB-373
6. Umberella Head Bolt M6 x 1.5 cm + Ring
7. Spacer Nut M6 x 2.8 cm
8. Spacer Nut M6 x 2 cm
9. Medical Plastic Injection 5 ml
10. Medical Plastic Injection 10 ml
11. Eye Coupling Nut M6 x 8 x 44
12. Bolt M6 x 1 cm + Ring
13. Spring SS OD.12 mm Thick 0.8 mm Long 10 cm
14. Bolt M6 x 45 cm + Nut
15. Mono Rotary Potensiometer 10K Brand.A-Plus
16. Cable
MORE VIDEO TUTORIALS
• TUTORIAL STEERING WHEE...
Source :
www.kaskus.co....
Credit :
- AI WAVE
- Arduino.cc
- Forum Kaskus
Those syringes can actually be used as it is for brake pedal. Air resistance may give it more realistic push feeling. Like load cells, but with potentiometer. Great job!
Thank you very much bro!
Ótimo trabalho 👍👍👍
Muito obrigado 🙏
Are you gonna built gear box as well?That would be nice 👌
Yes bro, still in progress
@3d print 2021 I don't have the template bro, when made it I measured it directly on the PVC board
I thought of this too thats why I'm here as I want to use my trustmaster pedals components.
What's wrong with your thrustmaster pedal?
Keren mbah
Matur suwun
Can we use it in GTA
Bang pembuatan plat plat nya itu gimana ya caranya?
Plat yang bagian mana ?
My pedals is almost done but I need that plastic thing you put over the potentiometer, time in Video is 15:47, I cant find a name for that piece or what it is, any help please
it's just a small piece of PVC sheet made with two holes for the potentiometer and for the pusher wire
@@edipurwanto25 thanks will make them
@@Av3rAgeSnip3r ok
Can u explain me how to connect the pedals to the plate and how to wire it to the PC. Everybody is showing how to do the potentiometer part, but after that you have to wire them into a plate in the right order, so u can plug them into the pc? help please
You can look at the wiring diagram in the video or the source link in the video description. The pedal uses three potentiometers and to connect to the arduino you need 5 cable lines. For VCC(5V) on three potentiometers in parallel using one cable line and connected to the VCC(5V) pin on the Arduino board, as well for Ground in parallel using one cable and connected to the Ground pin on the Arduino board. The other three wires are attached to each potentiometer and connected to pins A0, A1, A2 on the Arduino board.
To connect the steering wheel, pedals and shifters that have been connected to the Arduino board to the PC using a micro USB data cable and you need settings in the Wheel Confiq software to work.
@@edipurwanto25 and when i connect the pedals to the arduino, i have to take a micro USB and i can turn in into normal USB with an adapter and it should still work, right?
@Nenkow Of course, you can use USB adapter to connect the Arduino board to PC, the most important thing is that the Arduino can be detected by the PC and can run the Wheel confiq software.
what is that thing you put on the top/in the syringe
The black color is the syringe pump rubber.
@@edipurwanto25 no I meant the metal thing
@@josiah.cameruh in addition there are springs, bolts, rings and eye couping M6.
ну чунгачанга мочит конечно, респект!
English please...
@@edipurwanto25 нет
@@Uzbek1000-7 я не понимаю, что ты говоришь
@@edipurwanto25 you have nothing to worry about, you have good pedals
@@Uzbek1000-7 Спасибо, я думаю, вы хотите что-то спросить 🙏
Mau tanya gan, kalo potensionya itu yg spek gmn?
Di deskripsi ada gan, mono potensio putar ukuran 10K
@@edipurwanto25 ok makasih mas, sy lupa ga baca deskripsinya.. 🙏
@@anggij sama - sama mas
Kreatif
Terima kasih
What did you use
Arduino
@@edipurwanto25 for the pedals
@@Dustin_Yt387 For pedals, steering wheel and shifter all connected to arduino
@@edipurwanto25 what do you need to do a motion sim rig
@@Dustin_Yt387 I haven't built a motion sim rig yet, I've only made a steering wheel with force feedback
Cara kalibrasi nya klo mke potensio gmna ya om? Secara putaran nya ga full klo mekanikal nya kaya gni
Untuk potensionya tidak perlu full putaran di game juga bisa di setting
Oh jadi ga perlu setting lewat dtweak ya om? Langsung dari game nya aja
@@irfannugraha7090 iya gan di video saya juga ada contoh tutorial setting di game ETS2
@@edipurwanto25 makasih banyak ya om infonya sangat membantu 🙏
@@irfannugraha7090 sama - sama gan
Apa yang Anda gunakan untuk terhubung ke komputer Anda?
From pedal connect to arduino controller box and from arduino controller box connect to PC. You can see my video entitled arduino controller box for diy steering wheel.
@@edipurwanto25 Terima kasih banyak
@@nacky-nsb8160 Okay
templatenya bang bagi dong
Maaf mas saya tidak punya templatenya karena saat buat langsung coret2 di papan PVC nya 🙏
bisa pesan kah gan?
Maaf saya tidak menjual, buat sendiri saja gan mudah kok.
Pedalnya di jual gak gan?
Tidak gan, buat aja sendiri mudah kok