Making a Door Knocker using Rebar - Rebar Project
Вставка
- Опубліковано 6 лип 2022
- I make a steel door knocker, using rebar, it has the industrial-style look I like.
This door knocker is made from rebar, old nails, and an old pipe wrench which I cut with an angle grinder to make a small steel bit for the knocker to hit and basically just a bit of steel flat bar.
Its finished look had the industrial style look I love to make. It was a good welding project for me I enjoyed it.
The big steel flat bar is 3mm thick, 75mm wide, and 230mm long. The small steel flat bar is 3mm thick and 12mm wide.
The Rebar is 12mm rebar.
The main tools used, Welding Magnets, MIG Welder, Angle Grinder, Alpha brand discs, and Drill bits.
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY - Навчання та стиль
Half inch rebar ! I did not know you people spoke in inches.
Damn glad to hear it !
I think it is just some of us old people that grew up learning both, and have always talked both. Cheers!
You Sir are a Maestro of Metal- watching you work is hypnotic. In a world overflowing with cheap Chinese garbage you bring quality, workmanship and art back to the everyday household- and for that I thank you.
Thank you very much, I am glad you liked it, and I appreciate your comment.
Great job Gavin, and i've learnt a lot. Thank you
Blessings.
Glad it was helpful!
Ещё не смотрел сразу коммент!!!!! Спасибо за видосик!!!!!
Большое спасибо, привет из Австралии.
@@GavinClarkdiy Вам привет из России Курская область!!!!
EXCELLENT DIY DOOR KNOCKER.
My Dad raised me in a machine shop, the "Old-School" way. Your style reminds me of my younger days. < Oh, to be that young, again! >
I didn't have an angle grinder, back then. They hadn't been invented yet. I rubbed everything into with a hack saw, and lot of elbow-grease, & dressed it out with a file!
THANK YOU for giving us a great HOW-TO video!
Bill, from Tn. 🇺🇸
Thank you very much, I appreciate your comment Bill. I also spent many hours on a hacksaw and drilling and riviting steel projects together with my dad, it was him that made me who I am and gave me the drive to learn more. I see that missing is so many young ones now. Greetings from Australia.
Привет из России молодец всё классно так держать👍👍👍👍👍🤝. Удачи в делах и здоровье.🤝🤝🤝
Большое спасибо, я рада, что вам понравилось. Привет из Австралии.
It came out great!! 👏👏👏👍👍👍
Thank you very much, I am glad you liked it.
Another great project brudda! You make it look easy. Gonna start on mine right after supper! Here's to you 🍺
Thank you very much, I am glad you liked it. I wish you the best for your project.
So that is why so many concrete structures fall down every one using Rebar to make knockers. You have a lot to answer to. Brilliant
Hahaha, Thank you very much, I am glad you liked it.
Sweet. Man i love Rebar. Make so many things out of it
Thank you very much, I am glad you liked it. I love the rustic look of rebar, I wish you the best for your projects.
@@GavinClarkdiy Thank you and THANKS FOR ENLIGHTING US ON THINGS TO MAKE FROM REBAR. That is one i never thought of
Beautiful knack of knocker.
Thank you very much, I am glad you liked it. I appreciate your comment.
Wow! Great video production. Love seeing a master craftsman at work. The finished product looks great. Shared your video with my husband - we both appreciate your knowledge and skill!
Thank you very much Connie, I am glad you liked it, I appreciate your comment.
I've been a metal fabricator/welder for over thirty years and I was taught by one of the very best, my dad, who was also a metal fabricator/welder, for over 50 years, and I enjoy watching you work because I learn something new every time I watch you. Like the way you use the vise to hold the combination square so you can use both your hands to mark your work piece and many other little things you do to make the job easier. Keep up the good work and cheers from Palmdale California!
Thank you very much, I am glad you like my work and I appreciate your comment. Greetings from Australia.
Отличная идея и воплощение!!! Спасибо за то что делитесь своими знаниями и навыками. Привет из России!
Большое спасибо, я ценю ваш комментарий. Привет из Австралии.
Ooooohhhhhh wow !!! Beautiful piece mate. Just beautiful. =)
Thank you very much, I appreciate your comment.
You are a wonderful artist
Thank you very much, I appreciate your comment.
Нагыз шебер деп осыны айт 👍👍👍✊
Сізге көп рахмет, сізге ұнағанына қуаныштымын.
You are a magician. ❤
Thank you very much, I appreciate your comment.
Man, you're such a cool fellow
Thank you very much, I appreciate your comment.
Gaywin - you are well done!
Thank you very much.
Super Klopfer. Danke für die Inspiration. Das baue ich nach. Ein schönes Geburtstagsgeschenk auch für Freunde. ! Genial! regards from Germany, be well, ray
Vielen Dank, ich wünsche dir alles Gute für dein Projekt Ray. Grüße aus Australien.
great vid Gav
Thanks mate, your channel is coming along nicely 6,000 subs, top stuff mate. This is the link to Dmacs fishing channel. ua-cam.com/users/mrd51171
just awesome !! love this stuff!
Thank you very much, we have similar tastes. Thanks for your comment.
Отличная работа! Как всегда на высоте!
Большое спасибо, я ценю ваш комментарий. Привет из Австралии.
I hit the like before watching
That's cheating Hahaha, thank you very much, I am happy that you liked it.
You have a good eye for free form bending the shapes, and use all basic tools , Great job, Really like that Countersink bit you use, it really rips out the metal
Thank you very much, I am glad you liked it. Yes the countersink bit does a great job.
another nice good creation with leftovers without wasting anything.
Thank you very much, I appreciate your comment.
Nicely done. You make it look easy! Mission accomplished!
Thank you very much, I appreciate your comment.
Gavin perfect....😎
Thank you very much.
Useful project, Gavin! You know!. Thank you for sharing...
Nice to hear from you again, my dear friend 👍👍👍. Take care!
Thank you very much Eider, I have had a few things on, and have been quite slack with youtube.
good vid Gav
Thank you very much Paul.
Very cool Mr R... nice to see u in the lab again... You take care my friend and God Bless you and your family...
Thank you very much Gary, I appreciate your comment.
Never stop creating your masterpieces. Such a joy to watch.
Thank you very much, I appreciate your comment.
Great work and project! Wonderful craftsmanship!😁👍🛠️🔧
Thank you very much!
У вас золотые руки! Вы настоящий мастер своего дела и творческая личность. Сплошное удовольствие наблюдать за вашей работой. Спасибо.
Большое спасибо, я ценю ваш комментарий.
Galvin…….You are BADAZZ my friend! ! !
Thank you very much Mark.
I really love this job thanks sir you are really brilliant
Thank you very much, I appreciate your comment.
It was great, good luck
Thank you very much, I am glad you liked it.
Always creative, may God bless you
Thank you very much Mohamad, I appreciate your comment.
And you’ve again.mesmerising genius
Thank you very much, I appreciate your comment.
Great job 👏 👍 💪
But the industrial desk has more features than Inspector Gadget 😮 or a Swiss Army knife 😉🤔👍
Thank you very much, I am glad you liked it. As you may have noticed, I like a lot of detail in things. Cheers! I appreciate your comment.
Very good!👏👏👏
Thank you very much.
Best part is all done cold without a forge. He didn't eve use a torch. I like it!
Thank you very much, I appreciate your comment.
Very cool project Gavin. It's a joy watching a skilled metal fabricator start to finish on a project. Looking forward to your next video. Cheers 🍻
Thank you very much Steve, I appreciate your comment. Cheers mate.
Magnífico proyecto maestro, muy bien desarrollado y mejor ejecutado, una aldaba muy rustica y original, excelente resultado final, con todos los trabajos que hace con cabillas corrugadas, le recomiendo que se haga una dobladora casera , hay un montón en UA-cam y le facilitaría el trabajo, el tubo y el agujero junto con el tornillo de banco ayudan mucho, pero la dobladora es como más profesional, jajaja, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓 🔝
Muchísimas gracias. Estoy de acuerdo en que haría el proyecto mucho más fácil de hacer, pero estoy tratando de usar herramientas simples y no usar calor a menos que sea necesario, me gusta hacerlo con muy poco equipo para demostrar que no necesitas mucho dinero para hacer las cosas. . Saludos desde Australia.
Very Nice. ~
Thank you very much!
Amazing what a man can make with a few simple tools.
Thank you very much, I appreciate your comment.
Hello my friend i hope you are fine wonderful and beautiful work. Greeting from sa jeddah city
Thank you very much, I am happy you liked it. Greetings from Australia.
Thank you.
Thank you very much for watching.
Another cool video 👊🏻
Thank you very much Steve, I am glad you liked it.
Love your work Gavin.. Alpha gold all the way!!
Thank you very much Elise Kearley, Alpha does the job nicely, I appreciate your comment.
Well done Gavin and thanks for sharing
Thank you very much and thank you for watching.
As wonderful as usual. Chapeau my friend
Thank you very much, I am happy that you liked it.
I’m so glad to see your beautiful diy
Thank you very much, I am happy that you liked it.
Another great project Gavin, with precision engineering as usual.
Thank you very much, I appreciate your comment.
Such a cool idea Gavin and it looks awesome thanks for another great build
Thank you very much, I appreciate your comment Bradley.
thanks for sharing Gav.....awesome mate
Thank you very much, I am glad you liked it.
simple tools and sheep materials, you made high quality item thanks for this wonderful video
Thank you very much, I appreciate your comment.
Nice One Gav!!
Thank you very much.
Well done! Enjoyed this video. Thanks for the inspiration 👍
Thank you very much, I am glad you liked it.
Amazing my friend!!! Greetings from Uruguay 🇺🇾🇺🇾
Thank you very much, I am happy that you liked it. Greetings from Australia.
Thank You Gavin great video.
Thank you very much, I am glad you liked it.
@@GavinClarkdiy Hi Gavin fantastic videos can you please give a demo on your Mig welder you use and demo on setting’s please. Thank You for your videos as you can prove you don’t need all the tools to the projects you teach us.
@@Melbournewelder Thank you very much, I appreciate your comment. I am using a 240-volt Unimig viper 182, if you search on UA-cam there are a few videos reviews, and use of this "unimig viper 182" there is a 185 model out now too. I don't use enough other welders to compare mine to others or even say mine is good, I love mine and it has done everything I want it to do. I hope that helps a bit.
@@GavinClarkdiy Thank You Gavin for replying I look those videos up on UA-cam . Once again thank you for the video’s as you aware your videos help a lot of people out there.
Love your creativity
Thank you very much, I appreciate your comment.
Хорошая работа! Автору лайк!
Большое спасибо, я рада, что вам понравилось.
Beautiful as always!
Thank you very much, I appreciate your comment.
Gran trabajo como siempre! Felicidades!!
Muchas gracias, agradezco tu comentario.
Great job Gavin!
Thank you very much Tom.
Great design. Thank goodness I have a glass door and don't have to make this one...yet.
Thank you very much, I am glad you liked it. Hahaha "yet", I feel a real door is on the menu.
@@GavinClarkdiy yeah, if not for me I'll hopefully make one for someone else!
You are an artist!!
Thank you very much, I appreciate your comment.
Great video! giving ideas , showing just how to make each project easy to follow , I love your videos keep them coming . Thanks.
Thank you very much, I appreciate your comment. I have many more ideas to come.
That's a beauty Gav 🔨👍😊
Thank you very much Sparky, I am glad you liked it.
Pembuatan lock pintu..super strong sir. Good🤝my from indonesia🇮🇩
Terima kasih banyak, saya senang Anda menyukainya. Salam dari Australia.
Impecable trabajo parcero como siempre eres un profesional te felicito.
Muchas gracias, agradezco tu comentario.
Excelente e impecable trabajo...
Muchas gracias, me alegra que te haya gustado y agradezco tu comentario.
knocking on heavens door! 🤣 another great job! thanks!
Thank you very much, I appreciate your comment.
I'm you subscribe # one love the project all
Thank you very much, Welcome to the channel.
great craftmanship as always
Thank you very much Steven.
Nice job, again Gavin!
Thank you very much Reg.
Oh Amdado Gavin Clark, estou gostando dos teus vídeos e dando sempre um LAIKE
Muito obrigado, agradeço o seu comentário e os seus "Gostos".
Excelente
Gracias por compartir
Muchas gracias, me alegro que te haya gustado.
i absolutely think your work is genius level! keep up the awesome work!!
Thank you very much, I appreciate your comment.
Hi there Good job have good day and happy.
Thank you very much, you have a great day also.
Nicely done!
Thank you very much, I am glad you liked it.
Excelente trabajo !!!!! Saludos desde Apodaca Nuevo Leon Mexico....
Muchas gracias, me alegra que te haya gustado. Saludos desde Australia.
nice work you do, greetings from Santiago de Chile, South America. lindo trabajos haces, saludos desde Santiago de Chile, Sudamérica
Thank you very much, I am happy that you liked it. Greetings from Australia.
Another fantastic project Gavin. A great video, showing every step of the way, as usual. Thank you for taking the trouble to make these videos and give a lot of us out there some great ideas. All the best from the UK. Cheers. 👍
Thank you very much Paul, I appreciate your comment. Greetings from Australia. Cheers mate.
z
Supper nice. Great job!!!!
Thank you very much, I am glad you liked it.
Fantastic! ;)
Thank you very much.
Eres un genio amigo
Muchas gracias, me alegra que te haya gustado.
Brilliant mate! I love your videos Gavin, thanks for the great content :)
Thank you very much, I appreciate your comment.
Great project, Gavin. Love that industrial look. You make it look so easy. Thanks for the video!
Thank you very much, I appreciate your comment.
Nice one bro.
Thank you very much, I am glad you liked it. Cheers
G'day Gav, long time no see...
Just came across your channel, you're doing some great stuff.
I like the rebar projects, actually going to give them a go.
Best wishes mate.
Hi Rick, yes it's been a very long time, I wish you the best for your projects. Best wishes mate, Cheers.
GRANDIOSAS ARTESANIAS LOGRAS CON TUS MANOS Y UNA SIMPLE BARRA DE ACERO DE CONSTRUCCION. ACA EN CHILE HAY MUCHOS ARTESANOS QUE SIGUEN TU PASION. YO MISMO USO BARRAS DE ACERO DE 10 MM. A63 PARA HACER PARRILLAS Y DEFENSAS PARA VENTANAS. SUPONGO QUE HAS CONOCIDO CHILENOS ALLA EN AUSTRALIA. UN ABRAZO DESDE CHILE.
Muchas gracias, he conocido a muchas personas increíbles que trabajan con sus manos. Agradezco tu comentario.
Stunning piece or art 👍
Thank you very much, I am glad you liked it.
Good job
Thank you very much.
Excelente pieza 👌👍. Saludos desde Argentina.
Muchas gracias, me alegra que te haya gustado. Saludos desde Australia.
Travail très intéressant Mercie pour le partage de cette vidéo et bravo 👍👍👍👍👍 salutations à vous
Merci beaucoup, je suis heureux que cela vous ait plu. Salutations d'Australie.
Sangat luar biasa salam dari Indonesia sukses selalu Amin
Terima kasih banyak, saya senang Anda menyukainya. Salam dari Australia.
Как всегда - превосходно!!!
Большое спасибо, я рада, что вам понравилось. Привет из Австралии.