Hello ... perhaps with your video, made very calmly, I will succeed my lantern to hang in my garden. I'm already on the third can that I throw away because I can't figure out which way to make the openings of the strips. I have seen so many tutorials but they are super fast and I can not understand. Maybe it's easy for you because it's your tradition, but I assure you that for someone like me who approaches doing something like this, it's not easy at all. I hope with your video to succeed. Thank you very much... have a good Life.👏👏👏👏🙏🪷
Let me say sorry to you first, I used GOOGLE's translation In the middle of the aluminum can, the line was cut with a utility knife first, but it was not cut. After there are cutting marks, it can be separated by extrusion like the way in my movie. 容我先跟你說一聲抱歉，我用的是GOOGLE的翻譯 鋁罐的中間是先用美工刀割出線條，但是沒有切開來，有切割的痕跡以後，像我影片中的方式一樣，用擠壓的方式，就可以把它分離開來了
This is a windmill, not a lantern. It might look ugly at first, but it will get better and better as you do it a few times. Thank you for your support and hope you have a beautiful day. 這個算是風車，不是燈籠。 剛開始做可能會不太好看，不過當你多做幾次以後，就會越來越漂亮了。 感謝你的支持，希望你有美好的美一天。
@@lin-h-an Good morning...thanks for replying. I've already made some attempts but all bad... I'll try again by watching your video many times. Many thanks to you and a nice day. Thank you always... have a good Life.🙏🙏🙏🪷.
影片內容有一個地方需做修正，在列印製作格子的大小時，表格的總長（鋁罐一圈）應該是20.8cm就可以了，20.85cm有些大了一點
手太巧了👏
謝謝
好厲害~讚
謝謝
Hello ... perhaps with your video, made very calmly, I will succeed my lantern to hang in my garden. I'm already on the third can that I throw away because I can't figure out which way to make the openings of the strips. I have seen so many tutorials but they are super fast and I can not understand. Maybe it's easy for you because it's your tradition, but I assure you that for someone like me who approaches doing something like this, it's not easy at all. I hope with your video to succeed. Thank you very much... have a good Life.👏👏👏👏🙏🪷
Let me say sorry to you first, I used GOOGLE's translation
In the middle of the aluminum can, the line was cut with a utility knife first, but it was not cut. After there are cutting marks, it can be separated by extrusion like the way in my movie.
容我先跟你說一聲抱歉，我用的是GOOGLE的翻譯
鋁罐的中間是先用美工刀割出線條，但是沒有切開來，有切割的痕跡以後，像我影片中的方式一樣，用擠壓的方式，就可以把它分離開來了
@@lin-h-an 早上好...感謝您的回复。我也在使用谷歌，我希望它能正確翻譯你。慢慢地，我正在觀看視頻，也許我可以製作一個……我愛上了它，我希望能夠製作並獻給我已故的丈夫。看到燈籠在移動，我覺得不那麼孤單，覺得它在吹空氣。非常感謝你，你一直很友善。祝你有一個和平和諧的一天。永遠謝謝你……美好的生活。
Zǎoshang hǎo... Gǎnxiè nín de huífù. Wǒ yě zài shǐyòng gǔgē, wǒ xīwàng tā néng zhèngquè fānyì nǐ. Màn man de, wǒ zhèngzài guānkàn shìpín, yěxǔ wǒ kěyǐ zhìzuò yīgè……wǒ ài shàngle tā, wǒ xīwàng nénggòu zhìzuò bìng xiàn gěi wǒ yǐ gù de zhàngfū. Kàn dào dēnglóng zài yídòng, wǒ juédé bù nàme gūdān, juédé tā zài chuī kōngqì. Fēicháng gǎnxiè nǐ, nǐ yīzhí hěn yǒushàn. Zhù nǐ yǒu yīgè hépíng héxié de yītiān. Yǒngyuǎn xièxiè nǐ……měihǎo de shēnghuó.🙏🙏🪷
This is a windmill, not a lantern.
It might look ugly at first, but it will get better and better as you do it a few times.
Thank you for your support and hope you have a beautiful day.
這個算是風車，不是燈籠。
剛開始做可能會不太好看，不過當你多做幾次以後，就會越來越漂亮了。
感謝你的支持，希望你有美好的美一天。
@@lin-h-an Good morning...thanks for replying. I've already made some attempts but all bad... I'll try again by watching your video many times. Many thanks to you and a nice day. Thank you always... have a good Life.🙏🙏🙏🪷.