Complete RUNNING Fuel System Setup on our LS Swap Camaro
Вставка
- Опубліковано 29 сер 2024
- We explain the entire running and working fuel system setup on our LS Swapped 2nd Gen Camaro. Our swap uses the Corvette filter regulator, an external pump (walbro gsl392), and a single fuel line up to our stock 5.3 truck fuel rails, which were originally a return style fuel system.
We talk about everything we used, why we used it, mistakes we made and what we would do different next time.
LINKS to all the fuel system components talked about in the video: blvckflagd.com...
Don’t forget to get your FREE BLVCKFLAGD STICKERS when you subscribe to the channel here: blvckflagd.com...
I know the video is 3 years old but the way you explain and show the fuel system details is very helpful, thanks!
This is quite similar to what I'm working with. 1980 barn find. Not sure where to even start!
Love how that thing sounds. Could watch the end clip over and over.
👍
I love the quality of the video, excellent job. I’m on the fuel system stage of my build and I’m really considering the push lock style hose. Seems pretty easy to work with.
Love the push lok stuff...really easy to work with. Thanks for the feedback!
A tip : you can watch movies at Flixzone. I've been using it for watching a lot of movies during the lockdown.
@Muhammad Jayce Yup, have been using flixzone for since december myself :D
@Muhammad Jayce yup, I've been watching on flixzone for months myself :D
@Muhammad Jayce Definitely, have been watching on Flixzone for months myself :)
Great video! Looks like you’ve got it pretty dialed in.
Thanks! 👍
Great video, very informative. This was all a mystery till now, many thanks
Glad it was helpful! A lot of this was a mystery until we dove into it too!
I just got the stickers today and they’re already on my car, love the channel and the cars on it, thank you
Awesome! Thank you!
Man great thorough videos! Love this style of videos!
Appreciate that!
I haven't seen anything more posted on the Camaro. I subscribed to follow the build and this was the last thing posted. It's actually been a year since anything has been posted.
Great Video excellent quality awesome sound props! We’re in the beginning stages of doing our LS swap on our 81 Trans Am on our channel also I can’t wait and look forward to more videos
Sound cool! These 2nd gen f-body’s move well with an ls swap
You should have so many more views! Y’all are doing number one on my bucket list! I love these Camaros, and I love an LS swap!
2nd gen f-bodies rock….all of em’ from ‘70 all the way to ‘81……although the small window ‘70 to ‘74s are preferred you can always clone a split bumper out of a late 70’s version relatively easy……i used to have a ‘77 camaro 305/th350 car back in the 90’s…..if i didnt live in comiefornia and had these strict ass emmision/smog laws id probably still own it…..here in CA. ‘75 and older is smog exempt and are like gold around here….even a stripped/rusted out shell will fetch you close to $10k pending on the make and model…..back in 1998 i bought the ‘74 nova in my profile pic for $1500…..26 years and 6 engines later it now has a LSA super charged 370” motor that I am currently building into a 408…..and before this plandemic corn pop madness back in 2018 i purchased my ‘73 c/10 swb fleet for a steal at $3500… granted it was a 6cyl granny 4spd sm465 truck that was in shambles and incomplete (non running) had a buckled hood ,sagging doors, and chapped fenders…….within a week of getting it home i had it LS swapped with a 3000 stalled th350 and it was a certified ripper….fast foward within a month of that i replaced the doors, hood, and fenders with brand new pieces and prepped the truck for final minor ding’s and other misc bodywork, ………some time in late 2020 when all the inflation was happening i bought and installed a terminator x system and a vortech v-3 sci centrifugal supercharger…..now with 3.73 rear gears and a small pulley on the supercharger the truck is super duper fast considering what it is and the simplicity of it….the body work and prep is complete and is currently sitting in all white primer…..my 15yr old son got his driving permit and talked me and his mother into purchasing him a ‘67 mustang coupe 289 C code car….so the c/10 got put on hold while i dial in this mustang and make it safe and dependable for him, i just recently got done adding a front power disc brake conversion on it and now im just fixing minor leaks and other misc tiny things on it…not to mention im in the middle of adding an ACES killshot efi system on it that way i dont get a call early in the morning or late at night talking about i cant get my car started, i think it may be flooded😂😂😂…nope not havin it…also picked up a ‘96 roller motor 302 out of an OJ bronco that we are building up for when he graduates from school and that 200hp 289….thats if he is redponsible and doesnt get into any trouble with speeding tickets and stuff of that nature….and the beauty of it is we can swap the EFI off of the 289 right onto the 302 when its time….we already got the short block for the 302 sorted out with flat top pistons that have a slightly higher compression hieght and a set of aluminum heads with 58cc combustion chambers that way we will be taking that 302 from 8.5:1 compression to a hair over 10:1….basically shooting for a hair over 300whp
Hello 👋 Ik it’s been a year and I might’ve been too late already. But I always love the look of 1979-1980’s Camero and you guys putting this car all together to make a reliable vehicle it’s like a dream come true for me. If it’s alright been sold and it’s price.
Still have it and still working on it
Been waiting all day!
Videos are the same as any other project...takes 3x as long to make it as you think
Dude, I want to thank you for taking the time to explain things in detail. It’s frustrating to see how many how to’s on ls swaps are simply overviews. I have a 79 trans am deluxe That I’m swapping a 6.0 lq9 motor and 4l60 in there.
Question: Would you not recommend using the stock fuel line for the main fuel line?
It's debatable on the fuel line...I would not use any rubber lines originally on the car because they were only made for a carbureted system (under suction for most of the run, and only 7-12 lbs after the pump). You could get away with using the hard line, as long as you had all the appropriate fittings and fuel injection hose made for high pressure connected properly to it.
Great vid! You talked about the N/A fuel system setup. On a boosted application you stated not to use the Vett regulator. How would the fuel setup be for that application? Thanks!
I don't have 1st hand experience with this on an LS swap, but from my understanding, the vette regulator can only flow so much volume before you start losing consistent fuel pressure. It also keeps the pressure constant, whereas the stock GM return style regulator makes the fuel pressure lower at high vacuum situations (like idle) and raises pressure when there's low vacuum (full throttle).
Most people doing these kinds of turbo setups are using a return style system with an aftermarket regulator that raises fuel pressure with boost. That way it's easier to meet the high fuel demand at high boost pressure.
Fuel injectors can only pulse so much, and raising pressure with boost allows you to get more fuel out of them before maxing them out.
Great video I have a 76 Camaro I plan on swapping in a 6.0 with twin turbos
Great videos! Amazing website! You are awesome!
You answered many of my questions great video
Well explained Sir, Thanks !
Most welcome! Appreciate the feedback and hope it was helpful.
Great content!! Subscribed immediately!!
Thanks u for this video..its a lott help💪💪💪
Great video. I wouldn't have thought about air in the fuel rail. Thanks for the tip. What cam and springs are you running? Sounds good.
Excellent, I have a few questions. I'm building a 80 Chevrolet truck with a carb. I'm replacing the fuel system with stainless sending unit , stainless fuel lines / aeroquip hose. stainless filters and an in tank fuel pump. But I want to be able to LS swap later. So I only want to do this one time. My questions are what fuel pump , regulator would you run ? My motor is 350 hp smallblock with 600 edelbrock carb. The Ls will be 5.3 450-500 horse. trail blazer ss intake etc... I've had trouble with ethanol and corrosion. Thanks Doug
Subscribed👍🏻
Appreciate it!
nice
👍
What are the adapters you ran off the fuel rail to the line and to block the return line?
The fuel line from the pre-filter to pump might get a kink after awhile. It looks like it’s showing a little already maybe?
So I’m following through with your channel, I’m going to swap a 3rd gen camaro but I don’t know much about electrical, so I was wondering what components are you going to run with a fuse box
We'll have a video about the electrical on the car sometime...here's a quick overview though:
-The fuse box and harness run to the components that it is labeled for -- mainly the chassis stuff like lights, etc. On your car, this would be the stock fuse block. Only reason we have a new one is ours was missing.
-We used the stock 5.3 engine harness from the suburban but thinned it out. It has it's own mini fuse/relay box under the hood that we built. 4 circuits and 2 relays built according to lt1swap.com
-The car also has a trunk mounted battery with a cutoff switch, so we have a main breaker in the back AND a solenoid for the big cable to the starter for extra safety. The main power lug for the whole car (feeds the chassis fuse block AND the underhood fuse block for the engine harness) is the big terminal on the alternator.
You could easily go much simpler. Leave everything on your car as is, and just add the underhood fuse block for the engine harness. The only reason our build is so complicated is the lack of wiring to start with + the trunk mounted battery.
Some reading on lt1swap.com will explain the underhood fuse block.
Don't know why youtube crossed out some of the text up there...
I had some critics recently telling me that I shouldn’t use aeroquip push lock hose in my car ,how long do have you ran this hose safely? Thanks for the info
It's been on there for over 3 years with zero issues. The hose itself is pretty stout...much more substantial than the rubber fuel injection hose you'd get at a parts store. Fittings are nice and tight with no leaks. They don't budge unless you cut them out.
I ran a 6.0 fuel rail and line on a 4.8 in my pickup truck no return line at all you just need the drivers fuel rail and line
👍
Do you need a separate “pre regulator” if you use the vacuum fuel pressure regulator on the fuel rail and run the return all the way to the rail?
No. When I did mine, I didn't want to run 2 fuel lines the length of the car, which is why I'm running the corvette filter/regulator. Essentially I'm not using the stock regulator on the fuel rail and the return is capped.
You can run your return style rails in the stock configuration with the built in regulator. You'll just need to run that return line all the way back to the tank.
what did you end up using for the gas pedal? did you go electric or the drive by wire pedal from holley?
This swap is a drive by cable LM7, so I just used the stock setup from the suburban and adapted it to the stock Camaro gas pedal.
We're working on another swap in a c10 that's drive by wire, and we got a pedal out of a junkyard truck, bolt on bracket, and used tac module and it's all working well.
Alright maybe I'll get a response from someone on here I'm LS swapping a 94 ranger. I'm wanting to keep the original fuel tank my question is can I just add a walbro Inline fuel pump in sequence with the ranger fuel pump? (Can I just wire them on the same circuit)
Since your ranger is already fuel injected, just use an in-tank pump. I would guess the stock pump won't flow enough so just swap it out for one that will. It will probably work with the stock pickup and wiring with little or no modification.
Nice Info man! What motor mounts and accessories did you use to fit the camaro? (PS Pump, ALT.) Thanks!
Mounts are trans-dapt 4203 -- they came with all the bolts plus new clamshells and worked with our headers.
Accessories are stock truck stuff from a suburban (donor for the drivetrain), but we wanted to add a/c so we used ICT billet kit 335-551494X-3 to high mount the compressor, otherwise it would have hit the frame. Without a/c we could have used 100% stock from the suburban.
Every thing else fit. With this setup, I don't think the alternator would fit under a stock hood (we have a pretty tall cowl hood). The power steering pump is close, but it's good.
@@BLVCKFLAGD Man Thank you so much for the detailed reply! Im just getting started on a 1980 z28 LS swap. Your vids are Great! Thanks again!
@@jonalbright4033 no problem. happy to help
What did you do for bracket on power steering and alternator? Please
I'm using the stock truck stuff. Depending on the motor mounts it may or may not work for you. Alternator probably wouldn't fit if I didn't have a cowl hood. There are smaller parts store pulleys you can get for the power steering pump if frame clearance is an issue.
I didn’t see when u hooked up the fuel gauge or running the fuel pump wire to relay
Fuel gauge isn't hooked up yet in this video, just bare minimum for fire up. We'll have a wiring specific video some time soon.
Was it a must to use the cowl hood? Would the motor fit under with a stock hood?
The car came with the hood, but the biggest clearance issue was the stock location of the alternator. I had to do some trimming for the hood to close. I'm sure there's other options that mount the accessories lower though.
After blocking off the return did you pull the vacuum lines on the regulator?
Yes. They're not needed anymore and the corvette filter/regulator at the tank doesn't reference vacuum.
Do you do swaps for people? If so how can I get in touch with you
Manny Solis send me an email michael@blvckflagd.com
What size hood scoop does this have
What cold air intake did you use?
Cheap ebay chevy truck cold air intake...there's a bunch of them that are all the same, but they come with the tubing, elbows, clamps, box, and filter cheaper than you can get them all anywhere else.
What radiator did you use
I don't know. It was in the care when we got it.
@@BLVCKFLAGD one more question what headers did you go with ?
@@troydavis3065 I got lucky and found some discontinued stainless headers on the Holley website. Marked down to $79 from over $1k originally. They regularly have good stuff marked way down.
@@BLVCKFLAGD damn I been looking without trying to spend 500+
What did you havd to do to get hood to clear accessory and intake
The car has a pretty tall cowl hood on it. The alternator is the things that sticks up the most. The engine mounts we used put the engine pretty low and back, but there's still not much clearance at all.
@@BLVCKFLAGD ls1 intake clears stock hood, and a alternator relocation bracket will get the alt. down.
Nothing brings people together more, than mutual hatred! :Henry Rollins
Good quote...true.
Oh look, another LS swap..