How To Install Led Drl Sequential Lights
Вставка
- Опубліковано 4 жов 2024
- How To Install Led Drl Sequential Lights
Led Drl Sequential lights Install on 2015 Honda Accord Step by Step
Amazon Link
a.co/d/cnuJJL1
tags# led drl install, sequential light install, how to install sequential lights, led strip install, sequential signal, how to install led drl sequential lights, daytime running leds, led strip install, how to install drl sequential lights on 2015 honda accord, turn signal install, sequential turn signal.
I had doubts when you decided to put them at the bottom, but it looks good after seeing the end result. Nice job!!!
Thank you
Wow I though the same.....
True, it seems more premium imho and subtle not too loud so to speak
este cel mai frumos videoclip si mai clar explicat din cate am vazut pana acum...multumesc frumos celui care la facut...aprecierile mele !!!!
Thank You 👍
Looks great some of the outside housing ones kinda look weird but this one works
Thanks 👍
The end result looks pretty good, however, I would be concerned with the wire connections using just electrical tape. Solder and heat shrink would be best. You could also use automotive splice connectors. Posi-Products makes several varieties of splice connectors that would make the installation much cleaner and safer.👍🏼
thanks, solder and heat shrink and splice connectors are also good other options, I use what's best for every application, not everything has to be solder or heat shrink. I give all my electrical wiring a professional factory look.
I also was concerned about the electrical tape being used, I cringed a bit. Tape left to the elements will dry out and may cause an electrical short, who knows when that will happen, hopefully not at night.
Thanks man job well done
Thanks
Nice,... really appreciate the video
That's sick man good job
Thank you
Question i have a hood led sequential strip its running along my headlights and grill.. I think you solved my problem . The past 3 days I've been trying to figure out why the turn signal function is distorted while the car is running and when its off with in accessory mode they blink like they are supposed too. I think its because I have my ground wire on a bolt and the power wire tapped into my fuse box instead of tapping directly into my DRL wires.
Yes, Leds lights should always be connected directly to headlights or drl to function properly, only tapp into fuse box if you need constant power or switch power for anything else.
Was there a gap already in between the headlight and bumper? Are you concerned the bumper might unclip itself more easily
No gap bumper still clips with no problem.
These lights are barely visible during the day. Less than a month the bulbs start going out.
Probably a defective set, had mine for 8 months works perfectly fine.
The light strips are hyper flashing when I turn on the turn signals or hazard lights. How can I fix this?
That usually happens if one of your signal bulbs are blown or if you replace your original bulbs with led signal bulb, replacing the bulb with original bulb will fix that issue.
i tghink they look loads better at the bottom of the light where you put yours
Thank you, I do so too
What size length did you order? I have a 2015 accord as well
I have the 24inch its a big longer than the headlight but also can be hidden behind the grill. Hard to find the exact length.
Are those morimoto LED low beams? I see you don't have a rubber dust boot over it. Does that create headlight moisture issues? Or led failure from carwash etc? Been thinking about upgrading...thank you for your time
Its a different brand led, and they do come with a rubber boot to keep water out, just hard to see.
Do you have the link for the light strip inside the headlight on the bottom, the white looking one?
yes its on amazon www.amazon.com/iJDMTOY-Illuminating-Headlight-Honda-Accord/dp/B00OPEFKBQ/ref=sr_1_5?crid=1UDKCD7S8JXPU&keywords=2015%2Bhonda%2Baccord%2Bdrl%2Bled%2Bstrip&qid=1707081772&replacementKeywords=drl%2Bled%2Bstrip&sprefix=2015%2Bhonda%2Bacccord%2Bdrl%2B%2Caps%2C101&sr=8-5&vehicle=2015-59-751------------&vehicleName=2015%2BHonda%2BAccord&th=1
Nice!!!!
Thanks!
Am I wrong but seems like you also have the plug in drl strip in the headlight?
The headlight and Drl are 2 separate connections
@@Vtobadillo2580 im not wording it correctly , but im saying you have another drl strip inside the headlight where the original drl bulb is at?
Yes I do
Does this work on older car? Specifically that doesn’t have DRL cable/features
Yes this light will work on any car, ...for cars that don't have drl the light can be connected to the headlights.
@@Vtobadillo2580 ohh alright then. Thank you😁
I have a 2017 Honda accord LX and don’t have the OEM drl strip, where would I connect the red and black wires to? I’m not going to be using the turn signals. Please help
Black and Red wires connects to the same power that powers your head Lights, use a volt meter to figure out witch wire is positive and ground/negative.
@@Vtobadillo2580the headlights as in my low beam drls or the middle bulb? I don’t have a volt meter, I can just get a diagram on what wires to splice.
Yes, connect to low beam
@@Vtobadillo2580I’m sorry but it’s the middle headlight of the 3 right or the farthest from the indicator?
Your driving lights is your low beam
Did you buy those fog lights like that or you tinted them yourself?
Tinted myself,
The king blue light I see what bulb is it the one inside the headlight not the strip
My headlights are LED Bulb
how did you chrome delete the grille? is it a vinyl or aftermarket grille?
Vinyl chrome delete kit
@@Vtobadillo2580you have the link? Thanks