HI All. Try the better version of this tutorial on a version-2 video, ua-cam.com/video/s8Vfju4Mhpw/v-deo.html Chapters for this video 00:00 Introduction 01:12 Getting Started 09:35 Recording DMX lights in Unreal Engine 12:05 Final output of the matched DMX to music 12:16 Closure
Hi when you say you can't move is it that you aren't able to seek through using playhead in timeline in Chamsys ? If thats your doubt then try turning on (i.e fader up) on the playback (the one which you are controlling the timeline) and now you should be able to seek or move in timeline. Hope that helped.
Hi Im quite unsure about the hang you are experiencing but here's some tips. If there is a slowdown or hang could because of number of lights and quality settings you might have in scene. Try doing the below steps, 1) In UE, gotoEdits-->settings-->preferences-->general-->Performance--->Uncheck use less CPU when in background. 2) Try dropping the engine scalability and quality settings to medium or low 3) if you have lot of moving heads try dropping the quality of beam to low for now.. Try recording now and see if it helped.
Hmm too many fixtures is not a problem. Did you try dropping the quality of all lights? before recording. it could be either UE issue or system issue as well.. You can try with another UE version if you have installed..or test it on a simple map with few lights to see whether it works fine. If it works then you will have to check the actual map you are working on.
HI All.
Try the better version of this tutorial on a version-2 video,
ua-cam.com/video/s8Vfju4Mhpw/v-deo.html
Chapters for this video
00:00 Introduction
01:12 Getting Started
09:35 Recording DMX lights in Unreal Engine
12:05 Final output of the matched DMX to music
12:16 Closure
This is a very useful video and big thanks to Rajashekar bro to spend time to share your hard work and knowledge with others.
This video is genius! Helps me a lot!!!! Continue doing the good work
Could you try to make a video where you use both DMX lights and visual elements like a screen?
Hi yes sure will try to come up with that video as well.
tell me how to remove the effect from the fader
Hi to remove any pre recorded fader click REM and then click on the fader which needs to be removed.
大佬,我录制时候卡住不能动,如何解决么
Hi when you say you can't move is it that you aren't able to seek through using playhead in timeline in Chamsys ? If thats your doubt then try turning on (i.e fader up) on the playback (the one which you are controlling the timeline) and now you should be able to seek or move in timeline. Hope that helped.
@@RajashekarTechy 在您的9:37秒开始使用的Take recorder Add all Fixture Patches
开启录制就直接卡住无法操作界面 无法跟您一样流畅操作
Hi Im quite unsure about the hang you are experiencing but here's some tips. If there is a slowdown or hang could because of number of lights and quality settings you might have in scene. Try doing the below steps,
1) In UE, gotoEdits-->settings-->preferences-->general-->Performance--->Uncheck use less CPU when in background.
2) Try dropping the engine scalability and quality settings to medium or low
3) if you have lot of moving heads try dropping the quality of beam to low for now..
Try recording now and see if it helped.
@@RajashekarTechy 还是录制卡住,添加了太多灯具补丁才会这样,但是看您的视频也是添加这么多灯具补丁,却能流畅录制灯具动画,十分困惑
Hmm too many fixtures is not a problem. Did you try dropping the quality of all lights? before recording. it could be either UE issue or system issue as well.. You can try with another UE version if you have installed..or test it on a simple map with few lights to see whether it works fine. If it works then you will have to check the actual map you are working on.