I also need to replace the belt tensioner. Do I have to support the engine from the bottom with the jack? Or can I easily remove the engine holder without the engine flying towards me
Thnx bro for the vid but Maybe a weird question did your transmission kicked or how ever you wanne call it in english when you put in gear of that happend did it go away afete you changed the mounts?
Do you have any tips on getting the belt back on I just replaced my alternator and just took the belt off by pulling down and off but now I can’t get it back on would appreciate any tips :D
If it's to tight then watch how I explain it at the 5:45 mark in the video , if you don't remember the pattern it was on then you can probably find the diagram on Google
@@dizzydoesitall I know this is a lot to ask but do you have a discord so I can video call you and show you I would greatly appreciate you man if not it’s cool
The little vibration stopped. I just recently changed my 2 shock mounts also, both of them had cracks in the rubber on top. I have some shaking coming from my wheel now, I plan on changing my wheel bearings next
@joel_1946 I still have some vibration man. I have almost 100k now but it's been going on for a while and it just got worse over time. Especially when I hit about 70mph & up. I think I figured out the issue, im thinking it's the rear engine mount. I have it but I didn't change it yet. When I do I'll put up another video to keep u guys updated
Whats the name of the tool set you bought Amazon’s thnks
Torx & external socket set
I also need to replace the belt tensioner. Do I have to support the engine from the bottom with the jack? Or can I easily remove the engine holder without the engine flying towards me
Yes, support from the bottom
7:18 thank you my brotha
No problem, thanks for watching
Thnx bro for the vid but Maybe a weird question did your transmission kicked or how ever you wanne call it in english when you put in gear of that happend did it go away afete you changed the mounts?
@necattinkaraman5636 no not really but that could be your mounts , rear diff or tranny fluid needs to be changed
Thank you for a great video
Thank you for watching 💯
I have the same problem with shaking I thought it was tire out of Balance. Where did you buy the mount?
@bravo6631 amazon or ebay. I ended up also have a bent rim
Do you have any tips on getting the belt back on I just replaced my alternator and just took the belt off by pulling down and off but now I can’t get it back on would appreciate any tips :D
If it's to tight then watch how I explain it at the 5:45 mark in the video , if you don't remember the pattern it was on then you can probably find the diagram on Google
@@dizzydoesitall I have the tensioner as far back as I can get it and the belt still won’t get on and it’s the factory belt idk what to do
Maybe it's the way you are routing the belt. If it's the right size it should go right on
I have it right idk if when I pulled it off it messed up a pulley maybe
@@dizzydoesitall I know this is a lot to ask but do you have a discord so I can video call you and show you I would greatly appreciate you man if not it’s cool
Thanks for the video!!
No problem, thank you for watching!
Might sound like a dumb question but
What is the top mount called I need to replace that is it super hard?
@Watchmefam hey bro, the top motor mount? They should have what you're looking for on Amazon or ebay. It's not hard to do.
Yah the top motor mount, I was just seeing if the have a specific name for that part
@Watchmefam I don't think so, I just looked at the pics before ordering it lol. They come in complete sets too
@@dizzydoesitall alright thanks man
@@Watchmefam no problem, good luck
Great video thanx man
No problem, thanks for watching!
How many motor mounts are on the cla 250?
3 motor & 1 transmission mount
Did you replace the transmission mount or just the engine mounts
I didnt replace the tranny mount yet
I think it's fine though
Did you use Jack stands on both sides or just the passenger side for the tire?
Did the shake stop after you changed those 2 motor mounts
The little vibration stopped. I just recently changed my 2 shock mounts also, both of them had cracks in the rubber on top. I have some shaking coming from my wheel now, I plan on changing my wheel bearings next
@@dizzydoesitallhow much km or miles?? I have vibrations too i replaced right driveshaft and they reduced but still little vibrations 😬😬
@joel_1946 I still have some vibration man. I have almost 100k now but it's been going on for a while and it just got worse over time. Especially when I hit about 70mph & up. I think I figured out the issue, im thinking it's the rear engine mount. I have it but I didn't change it yet. When I do I'll put up another video to keep u guys updated
@@dizzydoesitall i have to do some test today if i still feel the vibrations i will change the 4 engine mounts. Thx for the video 😉 i have 66k kms.
@joel_1946 ok let me know please. Thank you for watching
Did you change the grill CLA ?
Yes, I got the GT grill from ebay. I think it was about 80$
@@dizzydoesitall did you do a video on how to replace the grill for cla ?!?
@ricardoflores5711 I might have one in my phone. If I do, I'll upload it
😱 'Promo SM'