THUNDERHEADER EXHAUST INSTALLED ON THE NEW 2024 HARLEY DAVIDSON ROAD GLIDE CVO ST! *LOUD*

Поділитися
Вставка
  • Опубліковано 5 жов 2024
  • We installed a Thunderheader exhaust on our 2024 Harley-Davidson Road Glide CVO ST! Make sure you browse the channel and subscribe! As always, thanks for watching!
    Follow me on Instagram @dooworkmotorsports!

КОМЕНТАРІ • 130

  • @KyleMiller-e5s
    @KyleMiller-e5s 5 днів тому +1

    ThunderHeader for life!🇺🇲💪🏻

  • @cobralife0417
    @cobralife0417 6 місяців тому +8

    Nothing sounds better than Thunderheader! I put a set on my 2024 Road Glide. I had them on my 2009 Street Glide as well! Love em!

    • @ryanr4181
      @ryanr4181 3 місяці тому +1

      it does sound Amazing i run the outlaw pipe i think the outlaw sounds better just my thought though.. either way that pipe sounds Sick on that CVO

    • @esillery
      @esillery 2 місяці тому

      Am looking at pulling the trigger for my 2024 RG. Do you happen to have a sound clip of the Thunderheader on a stock 117?

    • @cobralife0417
      @cobralife0417 2 місяці тому

      @@esillery yup on my Channel!

  • @ericv79flh
    @ericv79flh 2 місяці тому +2

    Thunderheader and S&S 475 has got to be the best combination.

  • @romanvalenzuela4018
    @romanvalenzuela4018 6 місяців тому +5

    Thunderheaders just sound the best

  • @BigTee3099
    @BigTee3099 6 місяців тому +4

    The thunderheader definitely wakes it up! I would go with a Khrome werks outlaw 2 into 1 exhaust. Thundermax ECM Tuner and S&S 475 cams or Zippers . That CVO is 🔥

    • @UnApologeticPatriot
      @UnApologeticPatriot 6 місяців тому +1

      S&S 475 is old tech. These M8's should have stuff like Star or RedShift in them. That's what really takes advantage of the head design of the M8. Also the new bikes don't have tunes available for them just yet but when they do it's going to be awesome.

  • @jasonbreedlove495
    @jasonbreedlove495 6 місяців тому +2

    Sounds alot better. It's good to see that some previous exhaust still have clearance for the new cam cover with the added sensors.

  • @jessel.8697
    @jessel.8697 6 місяців тому +4

    That's the last time those Thunderheaders will ever look that good. The coating on THs just dont wear well at all. But they are the best sounding exhaust hands down. The only thing that comes close are D&D FatCats.

  • @Roc900
    @Roc900 6 місяців тому +5

    Don’t sound bad but when you throw a Cam in It… OH BOY‼

  • @alfredomiranda7002
    @alfredomiranda7002 6 місяців тому +6

    Sounds great...need to get it tuned...very important.

  • @freeride6441
    @freeride6441 6 місяців тому +2

    Sounds much better , I have to get an exhaust for mine just waiting for a tuner to come out first...

  • @jasonfrost2895
    @jasonfrost2895 6 місяців тому +3

    I was wondering why you guys bought the new CVO when all of you have newer bikes already ! Love the new CVO and the thunder header sounds a lot better then stock ! Selling the Road Glide Special shouldn't be a problem at all ! 💪🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺 Love the videos 👍

  • @gregmonhollen4327
    @gregmonhollen4327 6 місяців тому +5

    Your dad’s bike sounds really good

  • @robertfagan8833
    @robertfagan8833 6 місяців тому +2

    Beautiful bikes in that garage! Your Dads bike is super clean!

  • @clubstyleridahd4695
    @clubstyleridahd4695 6 місяців тому +3

    That bike is going to rip with a cam and that pipe!

  • @TerryPlymouth
    @TerryPlymouth 6 місяців тому +1

    Looks and sounds a lot better. I just got my black CVO ST last Thursday and I ordered the Khrome Werks Outlaw Eclipse 2 into 1 and it’s on back order for the next 3 weeks. I can’t wait to get these stock exhaust my bike. I put the tinted heat deflectors on and I’m hoping I won’t have clearance issues. I have a Khrome Werks Aggressor system on my ‘23 Road Glide Special and I have the heat deflectors with no clearance issues. I hope everything fits up the same. I’m looking forward to more content on the CVO ST.

  • @gennarolorusso7709
    @gennarolorusso7709 4 дні тому +1

    I got a burns stainless pipe and cam pushrods cuffs stay tuned also a T Max tuner….

  • @patrickhollis5332
    @patrickhollis5332 4 місяці тому +1

    To me the black looks so much better but damn I love the red white one Bama colors RTR!!!!

  • @trekbsg
    @trekbsg 6 місяців тому +3

    I've always said.. -- nothing -- sounds like a Thunderheader. Btw, I love Bruno🙂🐶.

  • @BdeSimon
    @BdeSimon 6 місяців тому +1

    Duuuuuuude i thought something happened to you. Been over 2 weeks and was waiting for day 7 and 8 of bike week but got nothing. Glad to see your good.

    • @B1boi
      @B1boi 6 місяців тому

      He was hiding 😂😂😂

  • @SecretCityBagger
    @SecretCityBagger 3 місяці тому +1

    Bikes color scheme is so sick

  • @Slong970
    @Slong970 6 місяців тому +1

    These are louder than stock, but not by much. This thunderheader exhaust isn't something I'd put near the "loud pipes save lives" category. Thunderheaders are for someone that doesn't want ear plugs in when riding. They sound nice though, but aren't close to the sound/loudness of Reinharts or Cobra Exhaust.

  • @Aprojeep
    @Aprojeep 3 місяці тому +1

    The H.O. engine has a special grind camshaft that isn't used in a stage kit or sold separately.

  • @skulldaddy8431
    @skulldaddy8431 Місяць тому +1

    Funny… I just traded y 2020 Patriot in on a 24 CVO ST… same suspension set up… great trade up

  • @RichardJohnson-c6y
    @RichardJohnson-c6y 2 місяці тому +1

    I just purchased a new ST and I have a vibration around 2800 RPM to 3000 RPM wondering if you have experienced this yourself. Look forward to hearing some information.

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  2 місяці тому

      I don't feel the vibration. Did you replace the handlebars?

    • @RichardJohnson-c6y
      @RichardJohnson-c6y 2 місяці тому

      No all stock

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  2 місяці тому

      @@RichardJohnson-c6y Weird, I would take it into the dealership then since it's under warranty and have them take a look at it.

  • @toddaod295
    @toddaod295 6 місяців тому +1

    A beautiful sound from a beautiful bike!

  • @geraldgoodiii6993
    @geraldgoodiii6993 6 місяців тому +1

    I know a guy that has one it’s BEAUTIFUL.
    I see vids with lots of guys tossing 2-1s on these and not tuning them bc there is no PV support yet.
    I thought if doing full exhaust gotta tune it
    Did they change something on the 2024 m8 ECU or something?

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  6 місяців тому

      Technically you should tune it with the 2 into 1 pipe, however on the new 24's they compensate enough for the pipe without a tune. However, as soon as we can tune this bike with the PV, we will be tuning it. I'm not a fan of the SE tuner that is the only tuner available for these bikes as of now.

  • @jeremycordre8371
    @jeremycordre8371 6 місяців тому +1

    Sounds good, but I don't like how that pipe looks at all. Keep up the videos!

  • @rolf808
    @rolf808 5 місяців тому +1

    Can you tell me how the thunderheader is like on the freeway? Is it loud at low rpm’s at highway cruising speeds. Loud at higher rpm’s is ok when passing but I do not want hear a loud pipe all the time while on long road trips. I am thinking about getting one for my 2022 road glide st. I very much like the looks. Thank you.

  • @MrGreenjeansST
    @MrGreenjeansST 10 днів тому +1

    So I live in Cali and just bought the white ST with a 7 year warranty. If I tune it, it’ll flag it. With it already having a high flow air cleaner, do I really need the download/tune? I’ve been told it should be fine. I understand it’ll run fine for now but over the long haul is it going to burn up? Could the ECM recognize different o2 numbers and flag it? Thunderheaders has always been my favorite sounding pipe hands down and would love to switch.

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  9 днів тому

      Yeah go ahead and run it! No tune needed when you put an exhaust on the new 2024's

  • @mojo4376
    @mojo4376 6 місяців тому +2

    Looks like you might have screwed your cornering clearance on right sweepers….

  • @JCMaxi
    @JCMaxi 6 місяців тому +8

    I'm so torn about replacing the stock exhaust! I don't like the sewing machine sound, but I think it's a travesty to lose that cvo badging and carbon fiber tip. Hopefully an aftermarket exhaust will come out with both great sound and stock looks.

    • @guysmiley8473
      @guysmiley8473 6 місяців тому +1

      Ful sak inserts maybe...

    • @cobralife0417
      @cobralife0417 3 місяці тому

      Put that stuff on the shelf and join the Thunderheader man's club. Get that cat off that bad boy and let it sing!

    • @JCMaxi
      @JCMaxi 3 місяці тому +1

      @@cobralife0417 actually decided to go with stealth 2into 1 and a S&S 475 cam, but I have to wait until someone comes up with a tuner. The gold pipes look like they were made for this golden pearl color.

    • @HandsUp85
      @HandsUp85 3 місяці тому +2

      ​@noresponse 475 on a 121? The stock cam is a 511. You'd be putting a smaller cam than stock. That motor is made for a larger cam. I was recommended a CR512 by Wes from Cycle Rama. Just waiting for a proper tuner to be released

    • @xc8487
      @xc8487 26 днів тому

      ​@@JCMaxi Thundermax Wavetune?

  • @kenkenyon444
    @kenkenyon444 6 місяців тому +1

    Sounds like a different bike all together

  • @fairlydangerous
    @fairlydangerous Місяць тому +1

    I'm installing one on my CVO ST but had issue with it hitting the rear brake pedal pivot point. The stock pipe has an indentation to clear it. What did you do?

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  Місяць тому

      We used a hammer on the pipe and dented it in a little just so that there's enough clearance not to hit the rear brake arm.

  • @jeremyallen4828
    @jeremyallen4828 14 днів тому +1

    Does the thunder header use the stock exhaust flanges? And does it bolt to the head flush like the stock pipe does? I have the d&d on my 24 now and it has the flanges already on the head pipe and there’s a gap in between the head and flange and I can’t stand it.

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  12 днів тому

      The Thunderheader bolts up like the D&D Pipe.. They don't use the stock flanges..

  • @MarcusTurner-b6e
    @MarcusTurner-b6e 6 місяців тому +1

    Nice review keep up the good work DooWork

  • @Grof2000
    @Grof2000 6 місяців тому +1

    love TH , just need a better cam , is this Texas nice hood $$$$$

  • @HarleyMom223
    @HarleyMom223 6 місяців тому +1

    Awwww Bruno 🫶🏻🐶💙💙💙💙

  • @blade-x
    @blade-x 6 місяців тому +1

    new here but nice channel and great camera

  • @ronyclassen-re2jv
    @ronyclassen-re2jv 5 місяців тому +1

    What did you use for a tuner to dyno it? I can’t find a tuner that has a mapping to go to 2 into 1 for the vvt

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  5 місяців тому

      We didn't tune the bike. Also, this bike does not have the VVT engine.

  • @TheVeroneeLife
    @TheVeroneeLife 6 місяців тому +1

    Is that a decal on your side cover? Congrats on the bike, just got a 24 myself. Can't wait to add some goodies!

  • @Bagrman-kt1ot
    @Bagrman-kt1ot 6 місяців тому +1

    Great pipe, sounds killer🤩🤩🤩🤩

  • @FLTRXSTSE
    @FLTRXSTSE 5 місяців тому +1

    Great video! Did you have to mod anything or do anything during the install? Looking to get one for my bike.

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  5 місяців тому +1

      The front header pipe fits tight by the rear brake arm pin, other than that it bolts right up with no issues. Bike performs great with the new pipe too! No tune needed.

    • @FLTRXSTSE
      @FLTRXSTSE 5 місяців тому

      @@DOOWORKPRODUCTIONS Thanks for the info

  • @rl6490
    @rl6490 6 місяців тому +1

    Did you notice a difference in sound between your dad’s bike and from when it was on your bike?

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  6 місяців тому +1

      Yes, it's quieter.. Because it doesn't have as much compression as my bike..

  • @GoFasterHD
    @GoFasterHD 6 місяців тому +2

    Dad's bike is looking sweeeet.........can i ride it?

  • @sidewalkoutlaws646
    @sidewalkoutlaws646 6 місяців тому +1

    I’m really curious about your license plate with the color match and how I can get one?

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  6 місяців тому +1

      Its wrapped! Hit up Riot Wraps on Instagram and he will get you right!

    • @sidewalkoutlaws646
      @sidewalkoutlaws646 6 місяців тому

      @@DOOWORKPRODUCTIONS do the cops ever give you a hassle?

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  6 місяців тому

      @@sidewalkoutlaws646 Nope!

  • @Hoodsolo
    @Hoodsolo 6 місяців тому +2

    Yes sirrrr

  • @pioneer139
    @pioneer139 3 місяці тому

    How much louder is this than stock ? Iv got a 23 st I’m wanting to put one in but I’m not looking for super loud especially while cruising

  • @pioneer139
    @pioneer139 3 місяці тому

    Is this pipe quiet at highway speeds ? I ran a bassani road rage the 3 on my 21 road glide loved the pipe but after several hours of riding where it was mid length and stopped under the right saddle bag it would echo off of the pavement and bag back into your helmet and on long ride the drone of it would where you out . Looking at going to this exact pipe on a 23 road glide st want sound but hoping it will kind of put it all behind me

  • @spikethedog6901
    @spikethedog6901 4 місяці тому

    The stock pipes look so good. But they sound terrible. Hate to have to swap them out.

  • @BlancoFlaco
    @BlancoFlaco 6 місяців тому +1

    Sounds awesome 👍🏼

  • @jasonfrost2895
    @jasonfrost2895 5 місяців тому

    Does the new 2024 Harley Road Glide come with the screaming eagle Cam ??? If so can you update it ? Asking for a friend 😂😂😂😂

  • @1962egl
    @1962egl 5 місяців тому

    How is the fit and finish on this exhaust? I would like to run one but read so many negative reviews on poor craftsman ship. Poor finishing and rusting etc.

  • @michaelhudson303
    @michaelhudson303 6 місяців тому +2

    Twin exhaust looked better

  • @dwight072
    @dwight072 6 місяців тому +1

    Hell yeah

  • @bakerzz24
    @bakerzz24 6 місяців тому +1

    Good I’m glad it works harley is stupid for telling me it won’t fit they have argued with on so much stuff and I seen all American cycles with it now I’m ordering one for my 24 pretty sure cams will work on non vvt as well cause the cam chest is still the same. Just no tuners other than Harley 💩

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  6 місяців тому

      100%

    • @bakerzz24
      @bakerzz24 4 місяці тому

      Do you know the part number for that exhaust I wanna order that for my 24

  • @johnhill3786
    @johnhill3786 28 днів тому +1

    Open it up so we can hear it

  • @2147crew
    @2147crew 6 місяців тому +2

    Sick!

  • @Ejacko
    @Ejacko Місяць тому

    If truth be told, literally anything would sound better than the stock mufflers. I’m not that impressed with the sound of these pipes, but I prefer them to the stock. It sounds like you have a choice to be quiet around your own neighbourhood with the new ones. They’re not ignorant.

  • @loraynal7705
    @loraynal7705 6 місяців тому

    Sounds good but look funny on back

  • @fireguy_75
    @fireguy_75 6 місяців тому

    Why r the 2 nuts on the rear muffler brackets on the bottom of the bracket close to the muffler & not on top of the bracket where they normally go? Are they set up different w this exhaust?

  • @michaelhudson303
    @michaelhudson303 6 місяців тому +1

    Keep it CVO

  • @dsheehi_IFBB_pro
    @dsheehi_IFBB_pro 10 днів тому

    where did you get the number sticker? (33)

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  9 днів тому

      Had it custom made from my buddies shop Total Performance GFX.

  • @336offroad7
    @336offroad7 5 місяців тому

    What cleaning product do you use on the bikes?

  • @stevengiesler4602
    @stevengiesler4602 5 місяців тому

    What is the part number for the exhaust

  • @ronrodriguez6109
    @ronrodriguez6109 5 місяців тому

    How did you install the thunder header the head port is smaller than the headers

  • @geraldgoodiii6993
    @geraldgoodiii6993 6 місяців тому +1

    WTF
    Stock motor chopping
    Doesn’t that bike have a SE515 cam in it from factory?

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  6 місяців тому

      Not sure what Cam is in it from the factory, but it is definitely bigger than the cam that comes in the 121 with VVT.. As you can hear from the video lol

  • @briangately
    @briangately 5 місяців тому

    Where have u been

  • @PC-mr6qs
    @PC-mr6qs 5 місяців тому

    Did you sell the 2020?

  • @OnyxCVO
    @OnyxCVO 6 місяців тому

    Anthony, are you able to take the baffles out of those SE mufflers?

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  6 місяців тому

      I'm not sure..

    • @lewiscarter6259
      @lewiscarter6259 6 місяців тому +1

      Taking out the baffle is not a good thing , you loose back pressure!

    • @erichh3663
      @erichh3663 6 місяців тому +1

      There is a good video(2 parts) by UA-camr “Live Love Ride Eat” showing how to remove the end caps, reducer and some packing from the mufflers on the new CVO RG ST.

  • @angelalonso3521
    @angelalonso3521 3 місяці тому

    Im trying to get used to the new look of these bike but some of the angles look horrible!

  • @MossTheJockey
    @MossTheJockey 4 місяці тому

    🔥🔥

  • @Shredtires
    @Shredtires 6 місяців тому +1

    Sounds meh, wait for cam

  • @keithshelburne1427
    @keithshelburne1427 6 місяців тому

    How do we know what it sounds like when the videographer is on another bike?😂

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  6 місяців тому +1

      Turn your volume up lol you can hear it over the pit bike I was on..

    • @keithshelburne1427
      @keithshelburne1427 6 місяців тому +1

      Love the thunder header by the way. Had one on my '03 road king

  • @Mikey_556
    @Mikey_556 6 місяців тому

    Any weight savings?

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  6 місяців тому +1

      Maybe a few pounds losing the left side pipe, but the thunderheader was no lighter than the factory pipe with Cat..

    • @Mikey_556
      @Mikey_556 6 місяців тому +1

      @@DOOWORKPRODUCTIONS cool man thanks, it sounds great 🤘🏼

  • @knoxlogic82
    @knoxlogic82 2 місяці тому

    Beautiful bike but honestly not a fan of the exhaust. Just me though, the sound isn't for me.

  • @B1boi
    @B1boi 6 місяців тому +1

    Dog is scary like its owner

  • @MrQuandow
    @MrQuandow 6 місяців тому

    Still stay with your parents?

    • @DOOWORKPRODUCTIONS
      @DOOWORKPRODUCTIONS  6 місяців тому

      No, if you watched my other videos you would know that I have my own place.

    • @tjf2258
      @tjf2258 6 місяців тому

      What a dic…

  • @DjgcjhDghffgf-p1u
    @DjgcjhDghffgf-p1u Місяць тому

    Lopez Joseph Hernandez George Robinson Michelle

  • @harryhowell5644
    @harryhowell5644 Місяць тому

    There's just something about that exhaust to me. Its just fin ugly 😮

  • @basementracer
    @basementracer 2 місяці тому

    Looks like chit with one pipe, unbalanced and to be honest, that whole pipe looks lame. No style simply a noisey black drain pipe. Ruins that beautiful bike.