Fits my must haves. Also great, the multi electrisian plier from knipex and the electrisian bag from toughbuild if you are on a ladder ore hafe a smal set to walk around.
Almost all the electricians channels always talks about their tools & toolbags...but nobody talks about their Multimeters, voltage testers and such equipment...very strange indeed🤔🤔🤔
Its all about what are you doing as electrician....its not just to say I'm sparky...some elevtricians use the tools on daily basis that other electrician will hardly ever use. Job will tell you what you need and not comercials from tool companies
“The Milwaukee Packout system is by far the best storage system you can get”? 🤣😂🤣😂🤣 Most durable, most expensive, most heavy, these I’ll give you, but the rest of it...
No mate I haven’t personally but I have seen them on site and must admit they do look like a great bag but I’m just a massive fan of veto and their customer service
Also I use everything ck and wylex I’ve been told a lot of knipex stuff hasn’t been the best of quality for the price as it’s not even much more cheaper, I know ck and Wylex are that tiny bit more expensive but totally think it’s worth it, I mean I’m open to saving money but only if it’s quality stuff so I’d like some advice
Wylex consumer unit wise aren't bad. But there are much better options out there. Knipex and Wera are Ok for vde tools C.K and Klein are also decent enough. Find what's suitable for yourself. I always followed a rule. That if you need to borrow it 2-3 times. You should probably purchase it.
When you say the knipex flex stripper will do sheathing for armoured do you mean the internal sheathing around the cores underneath the steel protection or do you mean the outer sheathing mate? What size cable do they strip up to? Also how much and where did you get your bag from mate? Sorry for all the questions🤦🏼♂️🤣
Both are decent I've had my pro pac for about 5-6 years. Still in decent nick . The rogue 5.0 I've had for about 2 years. I use it for gas and plumbing. I'll be ordering the velocity 9.0. Just go with a 5.0. It should be more then adequate.
Hard to think an electrician that makes youtube videos doesn't know stainless is not magnetic. Maybe he didn't know it was stainless which would be even more odd.
Mate... you was doing so well up until you ripped out those wire strippers 🤦🏻♂️... I'll carry on watching coz I was impressed with the wrench pliers. Don't let me down !!! 🤣
People who don't cut back cable ties should be stripped and drawn across a field of uncut cable ties !!!
Fits my must haves. Also great, the multi electrisian plier from knipex and the electrisian bag from toughbuild if you are on a ladder ore hafe a smal set to walk around.
Almost all the electricians channels always talks about their tools & toolbags...but nobody talks about their Multimeters, voltage testers and such equipment...very strange indeed🤔🤔🤔
Fluke...no question any product they make is great.i trust them with my life literally
Bloody heck, for a moment I thought it was Cain Dingle haha. Nice video.
Nice disguise, getting a hoover to make it look like you clean up. Bet it's a brew maker.
I am electrician too, nice tools
Its all about what are you doing as electrician....its not just to say I'm sparky...some elevtricians use the tools on daily basis that other electrician will hardly ever use. Job will tell you what you need and not comercials from tool companies
Very important factor is that the tools are as light as possible so when youre carrying it you dont carry rocks with you in your toolbag
CK armour slice no faster than using a junior and the blades run out in no time complete farce of a tool weighs a tonne as well.
“The Milwaukee Packout system is by far the best storage system you can get”? 🤣😂🤣😂🤣
Most durable, most expensive, most heavy, these I’ll give you, but the rest of it...
Don’t need anything bigger than the 180 glandies as an electrician? Domestic maybe! Tried doing a 50mm gland up with them? 😜
Mint tool bag though!! Milwaukee all the way !!
Milwaukee hand tools are shit lol
I have no idea what all that electric stuff is, the water pump pliers look good tho 😉
They are nut f#@kers
😂😂😂😂😂. You must have the ergo? 😅😂😂
@@RDavisElectrical b&q lol
@@RDavisElectrical what’s that 😅
Would you do a tour of your ‘test gear’ fluke stuff etc
Top video again mate 👌🏻
Thanks mate 👍🏻
The velocity organiser you have in the van beats any organiser on the market.
Tried sticking it to the sink 😂😂😂😂😂
Funny enough it wouldn’t stick to any of the stainless appliances 😂🤦♂️
Good job man 🎉
Nice recommendation!
👍🏻
What’s the tool called you use to cut down 3.5 screws called mate?
Co bolt cutter 👍🏻
Knipex
The NWS 6 in 1 cutters as well as the C.K combi cut have the same functionality.
Level is cheaper at wickes had one for over a year. I user lasers now and my small fatmax
El brother nice to meet you bro
I wish that knipex would get there act together and do a replacement blade for the ergostrip 👍👍👍 other than that good bit of kit
I actually agree with you there mate 👍🏻
@@RDavisElectrical i'm undecided between the velocity or veto tp xl or xxl 🤔🤔🤔🤔
Veto without a doubt
You tried velocity mate?
No mate I haven’t personally but I have seen them on site and must admit they do look like a great bag but I’m just a massive fan of veto and their customer service
Also I use everything ck and wylex I’ve been told a lot of knipex stuff hasn’t been the best of quality for the price as it’s not even much more cheaper, I know ck and Wylex are that tiny bit more expensive but totally think it’s worth it, I mean I’m open to saving money but only if it’s quality stuff so I’d like some advice
Wylex consumer unit wise aren't bad. But there are much better options out there. Knipex and Wera are Ok for vde tools C.K and Klein are also decent enough. Find what's suitable for yourself. I always followed a rule. That if you need to borrow it 2-3 times. You should probably purchase it.
What’s the brand name of those screwdriver set? Thanks
I think these are PB Swiss screwdrivers.
Boddingtons.
What make screw drivers do you think are best?
Boddingtons mate
Have any of these tools been used? 🤣😂
When you say the knipex flex stripper will do sheathing for armoured do you mean the internal sheathing around the cores underneath the steel protection or do you mean the outer sheathing mate? What size cable do they strip up to? Also how much and where did you get your bag from mate? Sorry for all the questions🤦🏼♂️🤣
The knipex Ergostrip will strip the inner and outer sheath on double insulated 25mm meter tails. Great bit of kit if you ask me.
I am electrician from india how can i work with you...
Wera turbo driver?? 🤔🤔🤔🤩🤩🤩
Velocity rouge 5.0 or veto pro pac? Trying to decide which one is best?
Both are decent I've had my pro pac for about 5-6 years. Still in decent nick . The rogue 5.0 I've had for about 2 years. I use it for gas and plumbing. I'll be ordering the velocity 9.0. Just go with a 5.0. It should be more then adequate.
you brought all that in for just an EICR? :P or you doing remedials aswell?
Remedials as well mate 😅😂😂
@@RDavisElectrical was gonna say 😂 stick most my hand tools in my megger box on an eicr 😂
💯😂😂😂😂
Tiktok made me do it. Great videos/posts man👍👍
😂😂😂 thanks mate
Mate what do I get for watching all the ads at the start without skipping.
You and I get sweet fuck all 😂😂
Hard to think an electrician that makes youtube videos doesn't know stainless is not magnetic. Maybe he didn't know it was stainless which would be even more odd.
How would you compare the grips better the two 180 pliers wrenches? Is it worth getting the comfort grip?
You’re already invested in a wrench that’s going to last u your life so u might as well get comfort grip
Mate... you was doing so well up until you ripped out those wire strippers 🤦🏻♂️... I'll carry on watching coz I was impressed with the wrench pliers. Don't let me down !!! 🤣
What brand are the screwdrivers?
Boddingtons
Give me that tool box with drill machines
No
Good vid 👍
when he thinks it has to be magnetic to be metal
Just to rain on your parade...the K IS pronounced. Something like Kanipex
I think them CK armour strippers are worse fool ever I find the pipe cutting tool by knipex works so much better
There is no such thing as nippex. Its knipex.