HOW TO ASSEMBLE 16 IN OSCILLATING STAND FAN UNBOXING AND REVIEW

Поділитися
Вставка
  • Опубліковано 21 гру 2024

КОМЕНТАРІ • 79

  • @jeanstrope7019
    @jeanstrope7019 4 роки тому +20

    I could not have done it without your help. Thank you!

  • @devynglass3781
    @devynglass3781 2 роки тому +10

    Omg thank you!!!!! I couldn’t have put this fan together without you!!!!!! God bless UA-cam for the people who don’t understand the instructions on paper!!

  • @terissashirley8380
    @terissashirley8380 Рік тому +5

    Thank you so much , I couldn't figure this out but I also cannot figure out how to put that black piece in the very middle that says climate keeper to snap in mine is not already in there

    • @ljjuiceman4922
      @ljjuiceman4922 6 місяців тому +1

      Same here mines ain't working either the middle part keep falling down

  • @derrickwilson648
    @derrickwilson648 2 роки тому +9

    I don’t know who you are or where you are from but let me tell you this. I have never had fun putting a damn fan together but you had me laughing through the whole damn video while helping figure out how to put this damn thing together. You could be a damn comedian. I was in tears. 👍🏾👍🏾

  • @coreycoleman980
    @coreycoleman980 2 роки тому +48

    *I like how quiet it is, how well it works and **Fastly.Cool** , This was perfect to help air out a guest room and to use instead of AC when I only want one room kept cool. Works great!*

  • @melmelv5652
    @melmelv5652 3 роки тому +2

    My fan is not working but, when I lift the front grill up my fan works?

  • @georgeharris267
    @georgeharris267 3 роки тому +5

    It helps when U read the instructions and that the threads are left handed

    • @darkviolet1221
      @darkviolet1221 3 роки тому +4

      It helps when you buy a product that needs to be assembled and they actually give you the instructions

    • @iyamwhatiyam547
      @iyamwhatiyam547 Рік тому

      If both fan spinners were clockwise - they’d eventually cause themselves to loosen.
      It’s science ;)

  • @Ddeath.Eaterr
    @Ddeath.Eaterr 3 роки тому +10

    Omg thank you so much! I was beginning to get pissed at this fan but the video helped

  • @SuperDenise128
    @SuperDenise128 2 роки тому +2

    It screws on counter clockwise instead of the normal clockwise.

  • @layah28
    @layah28 3 роки тому +7

    My metal piece doesn’t even have a hole and the other end had a black cap on it so I can’t connect the top fan to the base 🤦🏾‍♀️

    • @Doncar97
      @Doncar97 3 роки тому

      Some problem

    • @ginadistefano3055
      @ginadistefano3055 3 роки тому

      @@Doncar97 seriously. What the fuck?!? How do you put this fucking thing together?!? Do you take the plastic piece off??

    • @Doncar97
      @Doncar97 3 роки тому

      @@ginadistefano3055 kinda hard for me to explain

    • @angelroddy3525
      @angelroddy3525 2 роки тому +1

      Mine is the same way, did you get it fixed? If so, how?

    • @nikkiwatson5194
      @nikkiwatson5194 7 місяців тому

      .

  • @breebree6587
    @breebree6587 Рік тому +2

    The instructions we’re so useless, thank you!!

  • @xmarksthespot8216
    @xmarksthespot8216 2 роки тому

    So how do you adjust the height? why is piece under thumb tightener threaded. It seems screwed up.

  • @sabrinadean2347
    @sabrinadean2347 Рік тому

    Thanks .. This helped me. My rob didn’t have a hole but fan still works

  • @bradykalman4781
    @bradykalman4781 3 роки тому +1

    Well when I turn mine on the back shakes so much it sounds like a jet fan is in my room

    • @iyamwhatiyam547
      @iyamwhatiyam547 Рік тому

      Yah put it together wrong.
      Look at where he puts the 2 tightening things.

  • @superbrofusion9059
    @superbrofusion9059 4 роки тому +5

    For some reason mines has a fuse 😒

  • @Bayley713
    @Bayley713 5 років тому +4

    What if the pole has no hole when screwing on main unit into place

    • @queenal7710
      @queenal7710 5 років тому

      Same problem -one part is thicker of the tube and I don't know which way to fit it. It's too thick on one side to fit either side

    • @layah28
      @layah28 3 роки тому

      @@queenal7710 same with mine

    • @cecilezechman9874
      @cecilezechman9874 Рік тому

      Same no hole

  • @jessicamassey829
    @jessicamassey829 4 роки тому +4

    The end caps dont fit

  • @lovelyt2107
    @lovelyt2107 6 місяців тому

    Why leave out important parts of the video? How’d you get the little cap off you didnt even show that

  • @robinanncaron
    @robinanncaron 4 роки тому +38

    It would've been a lot easier if you were sober. 🙄

    • @corycg1956
      @corycg1956 4 роки тому +2

      😂

    • @raccoon681
      @raccoon681 4 роки тому +2

      he's still more sober then some of the people working in construction iv seen

    • @z33andme71
      @z33andme71 4 роки тому +2

      LOL... I just bought 2 from Amazon & it came here yesterday but FedEx & Amazon didn't bother to send me an e-mail until 1:15 AM telling me it was here. Then FedEx didn't bother leaving them on my porch, they left them outside of my fence at the end of my driveway so I thought it was stolen until this morning... Freaking asshole!

    • @the_real_drwhoroblox1935
      @the_real_drwhoroblox1935 3 роки тому

      This comment as well as these replies made me balk when assembling a fan for my bedroom.

    • @marysweet3093
      @marysweet3093 Рік тому +3

      It never ceases to amaze me how many ROTTEN people there are in this world. So ungrateful!
      I thank you sir for helping me assemble my fan.

  • @Drgn-vs2kw
    @Drgn-vs2kw 4 роки тому +9

    The instructions are terrible so I'm watching this

    • @AMDRADEONRUBY
      @AMDRADEONRUBY 4 роки тому

      You dont need instructions come on...

    • @Drgn-vs2kw
      @Drgn-vs2kw 4 роки тому +2

      @@AMDRADEONRUBY I had a polarwind it took hours to get one part on

    • @nancyfischer4875
      @nancyfischer4875 3 роки тому

      @AMDRADEONRUBY you do bitch

    • @krystencoy7226
      @krystencoy7226 7 місяців тому

      They're definitely terrible. I had to look at the picture on the box and still don't know what a piece is... so here I am

  • @sharene4362
    @sharene4362 Рік тому +1

    POS fan is what it is

  • @jamminjoe44
    @jamminjoe44 Рік тому +1

    The instructions were terrible!! Thanks for your video, now I can take another crack at it and get it right lol
    Edit: I have the 12 inch version.. I think the damn thing should be fully assembled right out of the box.

  • @maxwellfogleman4187
    @maxwellfogleman4187 4 роки тому +8

    mine came with missing parts fml

  • @savagebaby326
    @savagebaby326 6 місяців тому +1

    You need to do better on your video because you couldn't see what you was doing

  • @ren8096
    @ren8096 3 роки тому +2

    Thank you so much

  • @AnabMohamed-ld8vh
    @AnabMohamed-ld8vh Рік тому +1

    Thank you

  • @lynettethompson1284
    @lynettethompson1284 Рік тому

    Mine came without the black ring, so i cant even connect the fan part correctly...kept trying to figure out what was wrong & then came upom your video & figured out why! 😂😒 Safe to say, I will NEVER purchase this fan again!! 🤞🏾

  • @Bobbythefanman
    @Bobbythefanman 3 роки тому

    Wow you are rough with that fan

  • @minxkapinx4ever
    @minxkapinx4ever 3 роки тому +1

    Thanks so much!

  • @briannaderby459
    @briannaderby459 2 роки тому +1

    Uhm my pole has no hole …..

  • @iyamwhatiyam547
    @iyamwhatiyam547 Рік тому

    Thanks !

  • @sugainhu5444
    @sugainhu5444 8 місяців тому

    Feels like a dad sendinf you a video from college bc you dont know how to do shit by yourself
    Ps im the dumb daughter. Thank you

  • @ethann1986
    @ethann1986 3 роки тому

    0:51

  • @angeliquegerbers1684
    @angeliquegerbers1684 5 років тому +1

    Looks like comfort zone fan

  • @savianbattle
    @savianbattle 5 років тому +1

    Thank u!

  • @gbeans9213
    @gbeans9213 2 роки тому +2

    Dude learn how to shoot a a video or have someone shoot it for you you're not even showing what you're doing

  • @Mk-bv4ee
    @Mk-bv4ee 5 років тому +1

    Thanks bro

  • @rickybrown5817
    @rickybrown5817 5 років тому +5

    You are fail how to build the fan

    • @robinanncaron
      @robinanncaron 5 років тому +2

      He started at the last step.
      I think he was drunk.

  • @brendagordon4600
    @brendagordon4600 2 роки тому +1

    😑😑☹️☹️

  • @DavidFales
    @DavidFales 3 роки тому +3

    Worst. Assembly. Video. Ever.

  • @whistleblowerlouisiana4699
    @whistleblowerlouisiana4699 Рік тому

    This guy is a over the place... no help at all

  • @daleamathis6620
    @daleamathis6620 Рік тому

    Too wobbly

    • @daleamathis6620
      @daleamathis6620 Рік тому

      Could not get the metal piece and bottom of pole to tighten