Man you have invested great effort in your work it’s usefulness is undeniably. Can you please get rid of the music so we can concentrate on your instructions.
Can this be mounted on top of a 98 Honda Accord sedan? That can swivel 360 degree's in both left and right directions as well as level the burner several degree's? I live in a rough neighborhood.
Waste oil burners are similar to paint spray guns, there are two types. Both types use air to propel the paint, but one type sucks the paint up the other relies on gravity feed. As the air pressure is varied in a spray gun by a central needle it drags up the paint. In both types the paint flow can be increased or reduced by restriction in the flow pipe feeding the nozzle.This alters the mixture of pain to air, and a waste oil burner is no different. The air pressure and the oil quantity both need to be adjusable to get the ideal air/fuel mixture. This burner obviously works well, but i feel if the air flow and the oil flow were both independently adjustable, a very good burner could become awsome!
If oil volume increases you need ever more air so the air to fuel ratio is maintained. Its actually a case of being able to control airflow rate AND oil flow rate independently so that an ideal mixture can be achieved. Reducing fuel restrictions would just make the burner very inefficient.
I appreciate the time you put in and the effort you go to with these videos, I'm sorry to say but I honestly think (at least this one) would be soooooo much better without that music. Your priceless info is lost thanks to rubbish noise.
yeah that song does suck , you can thank youtube for there rubbish music . videos without music get less view time so ill try and turn it down but i cant stop putting music in the videos , some people like it but i know what you mean i have also seen videos ruined this way
NOBOX7 OK I did realise UA-cam did that, I'm not familiar with that side if the screen lol. Is it possible just to fade it out a wee bit just while you talk? Or maybe instead of talking, you could sing your info.... Lol What... No I'm not kidding... Haha. Cheers mate have a good one.
Hello NOBOX7, I watch the three parts-video. Very good, I like the setup and is way better than before. When I have the time after renovating my house I am going to implement this on my furnace! Thanks again!
How to eliminate the music from this video: Click on the "Pause" icon. Mute or turn the volume on your viewing device all the way down. Click on the "Full Screen" box on the bottom far right of the screen. Click on the "CC" (Closed Caption) icon on the bottom of the screen. Click on the "Play" button.
how is the smell of the oil burning? i'm looking at a home made deep fryer, and this seems like the perfect design to heat the burner tube, vs a propane fired nozzle.
Me gusta,muy bueno,pero la música no es la adecuada para este evento. Pero el soplete esta muy bueno. Pero vas a tener que pensar en las manchas de aceite Seria muy interesante como hacer que no pierda. Bs As Argentina
The turbo idea is defiantly needed to make this think run on its own , Great idea . i found that pre heat isnt worth it , i actually have over 10 videos on the test i did . i tried the burner pre heat and varnish builds up over time clogging the device
Had to mute the sound some kind of shit music in the background. You can make a real simplified venturi nozzle with a mig tip, barbed fitting drilled and tapped with mig tip attached then thread to your 1/4 inch tee with your air supplied as you have done. Or pick up a cheap undercoating gun at Harbor Freight it will do the same thing and safe you build time
not true , you have insufficient information to make this claim , i have burners that run colder then this that can melt iron in 12 minutes in a foundry
@@shanestevens622 The foundry/furnace is insulated and minimizes heat energy loss, in other words, the heat accumulates. Whereas the burner is in the open and loses a lot of caloric heat to the surroundings.
Slow down or take down your music a little bit can barely hear you over the damn clutter the music be nice to hear what you’re saying you know I’m really into this been following you for years and it even like you to make me one of these nozzles but I mean I really want to hear you so please turn your music down too much I don’t know how anybody else feels about it but it’s too much
I’m pretty sure that hell has this music playing all day long
Man you have invested great effort in your work it’s usefulness is undeniably. Can you please get rid of the music so we can concentrate on your instructions.
Great information, but PLEASE remove the annoying music.
Can you do this with no music or tone it down to 5% of the ambient
Can this be mounted on top of a 98 Honda Accord sedan? That can swivel 360 degree's in both left and right directions as well as level the burner several degree's? I live in a rough neighborhood.
Are the tubes heat resistant or there's no heat transfer from the heat to the nozzle? I'm confused...
This brillian idea, no contact metal between burner chamber and oil nozzle & pressure air
Waste oil burners are similar to paint spray guns, there are two types. Both types use air to propel the paint, but one type sucks the paint up the other relies on gravity feed. As the air pressure is varied in a spray gun by a central needle it drags up the paint. In both types the paint flow can be increased or reduced by restriction in the flow pipe feeding the nozzle.This alters the mixture of pain to air, and a waste oil burner is no different. The air pressure and the oil quantity both need to be adjusable to get the ideal air/fuel mixture. This burner obviously works well, but i feel if the air flow and the oil flow were both independently adjustable, a very good burner could become awsome!
The larger hose supplies volume and reduces restriction of flow I would assume.
If oil volume increases you need ever more air so the air to fuel ratio is maintained. Its actually a case of being able to control airflow rate AND oil flow rate independently so that an ideal mixture can be achieved. Reducing fuel restrictions would just make the burner very inefficient.
I watch all your waste oil burner videos,. I would like to know how well these work in a real foundry and how they perform that way
ua-cam.com/video/NlBNDRcWGig/v-deo.html
@@NOBOX7 👍
I appreciate the time you put in and the effort you go to with these videos, I'm sorry to say but I honestly think (at least this one) would be soooooo much better without that music. Your priceless info is lost thanks to rubbish noise.
yeah that song does suck , you can thank youtube for there rubbish music . videos without music get less view time so ill try and turn it down but i cant stop putting music in the videos , some people like it but i know what you mean i have also seen videos ruined this way
NOBOX7 OK I did realise UA-cam did that, I'm not familiar with that side if the screen lol.
Is it possible just to fade it out a wee bit just while you talk?
Or maybe instead of talking, you could sing your info.... Lol
What... No I'm not kidding... Haha.
Cheers mate have a good one.
ill make sure its not so loud
NOBOX7 p
Have you tried using a pressure washer with an elevated oil feed? I'd shorten the nozzle hose though.
Hello NOBOX7, I watch the three parts-video. Very good, I like the setup and is way better than before. When I have the time after renovating my house I am going to implement this on my furnace! Thanks again!
great music, great video, thanks!
this is excellent! its like a varsol gun on steroids. i need to see part one and two. thanks for spreading the love! just subscribed!
What is the chance you can design a burner head that does not make as much noise ??? That would really be a quick seller. Thanks
How to eliminate the music from this video: Click on the "Pause" icon. Mute or turn the volume on your viewing device all the way down. Click on the "Full Screen" box on the bottom far right of the screen. Click on the "CC" (Closed Caption) icon on the bottom of the screen. Click on the "Play" button.
Very useful video.Well explained.Could you tell the average consumption?Compared to the other models with fan.Thanks in advance.Good luck.
U should show how build start to finish
How much liters per min. At 100 psi. I would love to build one for a foundary. But unsure what kind of air compressor i need?
warm next winter and barbeq summers best of both worlds
Simple and impresive.
how is the smell of the oil burning? i'm looking at a home made deep fryer, and this seems like the perfect design to heat the burner tube, vs a propane fired nozzle.
I have a much better burner design for that application , i sell them or if you want to build one yourself look up Godzilla burner
Me gusta,muy bueno,pero la música no es la adecuada para este evento. Pero el soplete esta muy bueno. Pero vas a tener que pensar en las manchas de aceite Seria muy interesante como hacer que no pierda. Bs As Argentina
Sí, la música no era tan alta durante la edición, es mi horrible software de escritorio, no hay mucho para elegir en la lista de escritura de copia
What air pressure are you usually running?
сделаю такую же , отлично обьяснил
У меня есть лучший друг дизайн, не делай этого
на счетзавихрения ваще супер идея!
I tried all kinds of stuff like this years ago and honestly it was so much cheaper and easier and cleaner and less stinky to just buy propane.
You gotta slam a pump on the oil.
Sounds like a bad 70s science fiction movie from Europe.
What oil you use? Can i use palm oil?
I think it would work but ihave never tried it . it should work
you should be able to use any oil , if it wont burn just ad 5% gas
NOBOX7 thanks
The turbo idea is defiantly needed to make this think run on its own , Great idea . i found that pre heat isnt worth it , i actually have over 10 videos on the test i did . i tried the burner pre heat and varnish builds up over time clogging the device
thanks for the trubo idea
спасибо большое, теперь я знаю почему у меня не получалось!!!
Da próxima vez, ve se fica quieto com essa câmera.
Good job👍👍
Love it!
Good Gawd!...the music, my ears! Actually this must be the work of the devil - not Gawd..
это клево
Drip pan
Had to mute the sound some kind of shit music in the background. You can make a real simplified venturi nozzle with a mig tip, barbed fitting drilled and tapped with mig tip attached then thread to your 1/4 inch tee with your air supplied as you have done. Or pick up a cheap undercoating gun at Harbor Freight it will do the same thing and safe you build time
عمل جميل جدا ورائع
You wouldn't be able to melt iron with this as the combustion chamber IS iron and clearly not getting to that temp.
not true , you have insufficient information to make this claim , i have burners that run colder then this that can melt iron in 12 minutes in a foundry
@@NOBOX7 Sorry, but how does the temp in the furnace get higher than the burner temp
@@shanestevens622 The foundry/furnace is insulated and minimizes heat energy loss, in other words, the heat accumulates. Whereas the burner is in the open and loses a lot of caloric heat to the surroundings.
YEH get rid of the music
I enjoy your videos but I have to say, your music is too dang loud and very annoying.
Why are almost everyone hav to add some laud sick music too the videos so you can not listen what they talk about.
Why the horrible music?
I was going threw a phase
Slow down or take down your music a little bit can barely hear you over the damn clutter the music be nice to hear what you’re saying you know I’m really into this been following you for years and it even like you to make me one of these nozzles but I mean I really want to hear you so please turn your music down too much I don’t know how anybody else feels about it but it’s too much
Sht but you can talk da talk
Very interesting vid. Kill the f&%kin music, please...
SHAME
? really
Less gay music please. Lower the music volume to 1 or 0...not 5
i was going threw a phase
@@NOBOX7 Capital I, and Through... but ok.
Hopefully you've gained some taste in music to come closer to your skill as a burner maker.
U should show how build start to finish