Surfboard Glassing in 4K
Вставка
- Опубліковано 10 лип 2022
- Glassing a board I shaped from start to finish
If you enjoyed this video check out my channel! The style of my videos is ever changing until I find what feels right. Leave a comment on which one you like the most!
Don't hesitate to leave a comment if you have any questions!
instagram: / cameronsardo
00:10 Lamination
7:07 Hot Coat
8:25 Fin Box + Leash Plug
10:16 Resin Panels
12:12 Gloss Coat
13:11 Sand + Polish
Surfboard Glassing in 4K - Навчання та стиль
![[Shaping + Glassing] Single Fin Surfboard](http://i.ytimg.com/vi/In_-TyVNw1k/mqdefault.jpg)
![[Shaping + Glassing] Single Fin Surfboard](/img/tr.png)
The Alvin Zhou video format for surfboards, perfection
I remember watching John Carper do this. That guy can do anything.
Wow!! Would love to do this some day. Fantastic job!
Love this sort of film making! Keep it up
thanks!
Super bueno clean style to this one.
Mate, o always get excited when your vid notification pops up! I bet the process isn't as soothing and relaxing as it looks! Keep it up :) Keen for some more shaping vids start to finish too!
thanks so much! definitely more to come
A real treat to watch
It looks amazing, great video.
Very good job!!
Beautiful board and awesome video
thanks so much!
Can't wait next video fantastic..
Nice video❤! Very good job!
Congratulations for the video. You show everything.
Great!
beautiful
Very nice work
Great content
Clean design
only the cleanest of designs
Beautiful
thank you
A very professional finish to your boards, may I ask how do you manage to keep the tape the right distance in from the rails when masking the bottom pre laminating the top of the board.
Dude we need more content! 🙌🏻
Quality workmanship.. How did the board end up going?
No comment other than thank you.
Amazing. You are an artisan extraordinaire!
From Aeven's Aunt Louise
Beaut!
Thats the good stuff!
Start to finish done proper
Well done man
What hardness on is the flexpad?
Or whatever the sanding pad is
And do you like it and that style of sanding machine?
thank you! i can’t remember how they titled the flex on the pad but it’s pretty stiff. i find i can get more precise with the 5” rather than 8/9” sanding disk
What porcent do you used for last glass?
And btw, fantastic video…👏🏻🤌🏻
Nice board! I want to make my own board for the first time and I am looking into all the equipment I will need. What do you use to cut incisions for the finboxes and leash plug? Also, what kind of sanding machine do you use? Thnx!
I just recently came across your videos and bingeed them all only to find out that the last one posted was a year ago. I'm so bummed there's not more. Why did you stop posting these great videos?
oh yeah
oooohhh yeeaah
Nice video, and nice board!
One question.. do you think that starting to sand with 400 is better than with 100? You maybe end up with a much stronger board?
👍👍👍🤙
i was wandering if it's possible to spray painting the surfboard, before putting on the las coats or the ending gloss
Do You use antitaking in the first lamination?
Good video and nice shape! How did you learn? Shaped with someone, videos/books, or just trial and error? 🤙🏽
little bit of each! and a lot of trial and error
hello 2 q's:
how long do you wait between coats? is resin fully hard or just tacky?
one time i mixed epoxy w/ 30min curing resin and mixed throughly then set it down to cut some cloth, and before even 5 mins the pot started smoking and it instantly hardened. do you know what can cause this? is it setting it down for too long? like it needs to be stirred or else it sets? or incorrect ratios? thank you
1. between laminations, the resin has to fully cure so that i’m able to sand the cutlaps. between hot coats, just cured enough that i can flip the board onto that side without damaging the hot coat.
2. i’ve only worked with polyester resin rather than epoxy so i’m not sure how they differ but it sounds like there’s too much catalyst in the resin. i’m probably not the guy to ask about epoxy though
With epoxy, do not let it sit in the bucket, ever. It will get super hot, super quick. Pot life is a misnomer. It just means it will not kick for that long, but it is amplified in the bucket. More resin, more hot. Pour it all immediately after mixing. Play with it and catch it in the bucket and pour again if needed. DO NOT LET IT SIT IN THE BUCKET.
Is hot coat sometimes referred to as sanding resin?
Where do you get your blanks from?
What do you use for gloss coat?
Qu'elle est le pourcentage du durcisseur par rapport à la resine et merci
What kind of resin is?
laminating resin for the laminations and sanding resin for the hot coats and resin panels. most surfboard supply shops will have containers labeled this way
Not a fan of glassing. Shaping is where is at.!
Nice.