The NEW "MARS Warrior" Unboxing | FPV V-Tail Wing
Вставка
- Опубліковано 13 вер 2024
- I've just had the MARS Warrior which I bought here arrive bit.ly/3AtElpr Oh and if you want the wing connectors, see here bit.ly/3yE3xcj for £9 & apparently they're in the PNP version
IMPORTANT:
This model was bought out of my own money, for my own enjoyment. This was NOT a "freebie for review". As such my views, opinions and setup will most likely be different from someone else's.
Mars Warrior Fixed-Wing FPV Long-Endurance Carrier V Tail Durable Convinient RC Racing for Adults UAV Drone
---------------------------------
View/purchase link: bit.ly/3AtElpr
Note: May also be on Banggood here: bit.ly/2VJsrcj
Name Warrior
Material EPP
Wingspan 1 200MM
Length 81 6MM
KIT weight 520G
Takeoff weight 1 800G
Battery 4S2P 21 700-63P21700
Motor 2814 KV1 000
ESC40A
Servo 12G*4
Propeller 1 280APC
1. Ergonomic grip position, easy to throw away, precise control of the rudder surface.
2. Both the main wing and the tail wing can be disassembled, no tools and glue are needed for installation, which is convenient to carry and fly outdoors.
3. Super drop resistant EPP material, built-in carbon fiber reinforcement.
4. Adapt to the mainstream sports camera GOPRO9.
5. The battery compartment is large in size and can accommodate large-capacity batteries, increasing the "flying time."
6. The camera position matches most FPV cameras on the market, with strong compatibility.
7. The design of the wing swept back is good-looking and light in weight.
8. The inner side of the fuselage is reinforced with carbon fiber to increase the torsion resistance.
9. The aileron and tail rudder surface are reinforced with carbon fiber to increase the control accuracy.
10. Dedicated camera cabin, flight control cabin and GPS cabin to facilitate the installation of various equipment,
Reduce interference.
11. Powerful ventilation and heat dissipation system to prevent damage to the equipment due to overheating.
At 11:26 you said that servos are always better when top mounted, but that is only true for elevators and elevons. Aileron servos SHOULD be on the bottom. 1. It keeps the top of the wing clean, preventing air flow separation (stall). 2. The general force of the air, in-flight, is pushing up on the aileron, so the bottom mounted servo is constantly pulling to keep it in the neutral position (desirable). Great looking plane. Thanks for being the guinea pig!
Slightly different EPO foam shapes, amazing!! awesome!!!! J/K, love the enthusiasm
Good to hear from you again!!
Plane looks nice matt, really enjoyed the video and your enthusiasm for the hobby. Get the work bench tidy you scruffy so and so. 😋👍
Matt, my workbench isn't as bad right now, but... Well, I've been there. 😬
My workspace is a total mess, though. 😂
Anyway, that's a pretty amazing airplane! I really liked it! 😃
Stay safe there with your family! 🖖😊
proper builders work shop,unlike lots of reviewers .Looks a decent plank...
Been putting tidying it up for months 🤣 Finally got to it this morning as I had no room to work 😜
Nice. It looks like a lot of thought has gone in to this, which is great to see. It looks like a really interesting model.
I really wish anyone sold this model in the US.. I love this kit..
Thats such a cool looking plane!
This one was actually designed by the same guy who designed the Dolphin, so the resemblance isn't a coincidence.
First off, great to see you back mate, and good review as always, But wtf were they thinking in their pricing? £90 for the kit, fair enough but then £45 for postage, and delivery roughly end of september?. For £45 postage id want it within 7 bloody days. But it does look like an interesting design. Just which the pricing was a bit more realistic.
I already got this one on the way! Seems like a Awesome Model.
Shipping: US $194.74 , From Aliexpress!!. BG has the model listed $256 + $75 shipping.. LORDY! These have gone thru the roof in price in a short time. I don't believe I'll be an owner of one of these...Too bad, I think they're cool looking.
Welcome back Mat ... looks really intressting modle ... but i guess i have to build my Nano Drak first ^^
ps.: love your Desk xd
I'm not sure why, but this model gives me the impression that it would be a handful. I would definitely keep a good bit of altitude until you get it tuned in.
Definitely one of the coolest looking planes out there. It reminds me of the Stark Jet from Spiderman Far From Home. The one Happy came to pick up Peter in.
Welcome baaaaaack
Nice unboxing review thx, and model Looks interesting, but also looks like they've have bumped the price up and increased the shipping to the UK.... ho hum
Glad to hear Matt again. And unboxing a sexy plane!!! :D
By the way, Could you share the link to Dolphin's motor extender?.
Thanks!.
Very impressed, love the military look to it. Matt you could've used the dart 250 in front of you as the example of the motor extension. Btw the dart 250 on 4s is just fantastic. Try a 6s motor on the warrior with a 6x4.5x3 prop if you're concerned about 4s.
Howdy, ah I like my 3S li-on cell setup, I get so much range in that 250g that way :) Matt
107 pounds for the plane and 80 for shipping is a bit more than few weeks ago :( but looks mighty nice
Yep the price has changed on it several times.
This plane looks interesting, but really big for a 1.2m. Sad to see the Dart 250g fuse disassembled on the desk. The 250g is of my faves.
And mine too! It's there as it's a brand new one! Matt
Nice looking model, and hardware looks very decent. The wing design is very interesting.
For back ESC hatch, you probably could just laminate on, as will not need to access often.
BTW: Looking a description on AaliExpress, see it details both 4s and "6s" setup options.
6-S sounds like some serious fun could be had.
Yea with 6S and a low KV motor, it would fly for days
@@RagTheNutsOff why would 6s allow longer range? Can you explain?
when do they sell those on amazon hmm
cool
Matt, I don't want to RAGtheNutsOff but when are you gonna give us the maiden on this bird!?
Great video 👍👍👍 what motor, prop and ESC are you going to use on this plane ? And do you think it will be dangerous ( prop to close to the hand )to hand launch 🚀?
Howdy, 2814 900Kv is what is now in it. As for prop strikes, side throw!
@@RagTheNutsOff 👍👍thanks for the reply, what prop size ?
@@rodeopilot7495 not sure as I'm still in bed and getting up (03:49 here). Probably quite big. Let's see how it flies with it first, should be later today. Matt
No maiden?
Looks great, will probably rip but fall like a brick when off the throttle
So how can you get one when theres no UK shipping options?
Are spare parts available?
Looks a bit like the atomrc dolphin. I like it 👍
I have the dolphin and love it!
@@RagTheNutsOff which is easier to fly?
Did you ever fly this plane? Yeah
Why is there a 'battery sticker' on the box? Surely it doesn't come with batts?
NFI!
Your desk is as bad as mine lol
I want one..
Have you already flown this bird? Or just unboxing?
Probably crashed it
@@skyforce1983 if no flight review you may be right
Hey, has anyone see Matt?
Nice plane. Just a bit pricey.
This plane need flaps :D
Oh no, it's so sexy. Now you've done it, you've twisted my arm. I must have one
Looks kinda like a seagull
Efficiency will be full crap due construction of the tail.
How is this any different to a mini talon VTail?
@@RagTheNutsOff The problem not in VTail. The problem is HUGE motormount that block air flow.
@@myway6335 oh absolutely, that was noted in the video
Don't tidy up you'll never find anything 😜
Hahaha indeed!
Dude tidy up some for an unboxing! So distracting. I expect more from you.
Yea not happening any time soon. Just finished 3 builds, two more to go
A new inflatable rubber p***s tractor ?!
I don't get your comment?
terrible hinge
What a mess on the table... 🤮