Yes the ramp down time of the laser beam can be adjusted, as well as the end point of the weld. In addition the current LightBOT SW has added changing welding conditions on the fly, so a different condition can also be specified anywhere along the robot path.
The LightWELD system itself is rated at 100% duty cycle for conditions under 90% humidity and 90 degrees temperature. The Fanuc CRX co robots are designed for 8 years maintenance free operation. So within this aspect yes, if it works in regards to production rate and part complexity vs. cost of the system. Single plane parts are easiest to automate. Fanuc has virtual world Weld Pro SW available to allow off line programming.
@@AverageJoe2020 There are plenty of studies done about laser welding easily available online. The Process is well documented and proven, and widely used in various industries. A quick google search will yield the results you desire.
using nitrogen gas with the LightWELD provides superior results in terms of porosity with steel, stainless, and nickel alloys, and also reduces the cost.
im expert in laser welders. whole settings should be ruled with profile ( like adjusting gas pressure, power ,frequency, wobble width wobble speed, wirespeed) all from saved profiles. using many different setting to adjust is stupid idea, ipg don't even try to solve this issue,
so ah....ahem...this is ah....so ah...ahem.....so ah, and ah....ah it was... ah back in the 3rd grade ....that I ah ...developed ...my ah ... show and tell skills and ah....ahem
@@serralaser Please make a video of a water tight box showing the ability to slow down enough to control the weld in a three weld seam converging corner.
Hi
I have a question
Does this model have material cutting function?
If so, what is the maximum thickness of the material that can be cut in mm?
Beautiful results!
How does the strength and malleability of laser welds compare to TIG and oxy-acetylene welds?
Hello, nice presentation, thumbs up. I have one question, is it possible to do a concave weld with laser?
Nice demo. Can anything be done with technique to rid of the crater at the end?
Yes the ramp down time of the laser beam can be adjusted, as well as the end point of the weld. In addition the current LightBOT SW has added changing welding conditions on the fly, so a different condition can also be specified anywhere along the robot path.
plz also conform this machine is suiteable for high production parts ?
The LightWELD system itself is rated at 100% duty cycle for conditions under 90% humidity and 90 degrees temperature. The Fanuc CRX co robots are designed for 8 years maintenance free operation. So within this aspect yes, if it works in regards to production rate and part complexity vs. cost of the system. Single plane parts are easiest to automate. Fanuc has virtual world Weld Pro SW available to allow off line programming.
هل يمكن لحام خزان السخان الكهربائي بسمك ١.٥ ملم او ١ ملم ويتحمل ضغط الحرارة والماء الحار بهذه الماكنه
I would love to see a cut and etch!!! Looks cool but need to see some cross sections.
Give us a call with any questions. 714-680-6211
Do windy conditions effect the laser?
No. Light is not affected by wind.
How much is the laser welding machines
serralaserstore.com/collections/lightweld-1500
In the EU about €25000
Hello
Can i rent the machine from the compay.
Hey man, how strong are the welds on say 1/4 to 3/8 SS?.
Very strong. Superior to tig and mig in strength.
@@shearperformance Citation please.
@@AverageJoe2020 There are plenty of studies done about laser welding easily available online. The Process is well documented and proven, and widely used in various industries. A quick google search will yield the results you desire.
Can you do a .060 stainless steel butt weld. Also we are using 100% argon with ours is nitrogen totally different as far as porosity.
Give us a call with any questions. 714-680-6211
using nitrogen gas with the LightWELD provides superior results in terms of porosity with steel, stainless, and nickel alloys, and also reduces the cost.
what is the cost of machine plz conform ?
serralaserstore.com/collections/lightweld-1500
Looks like to make 3 welds it takes 15 minutes. It is not for mass production. It is Ok for garage fix
It’s much faster than any other weld method. It probably took a while because he is demonstrating.
Hi brother, price one set
serralaserstore.com/collections/lightweld-1500
كم السعر من فضلك
Bạn cho phụ đề tiếng việt vào đi bạn ơi. Tôi mù ngoại ngữ
I want bay one
Quiero comprar una cuánto cuesta
serralaserstore.com/collections/lightweld-1500
im expert in laser welders. whole settings should be ruled with profile ( like adjusting gas pressure, power ,frequency, wobble width wobble speed, wirespeed) all from saved profiles.
using many different setting to adjust is stupid idea, ipg don't even try to solve this issue,
At 20k, it's still not affordable for your average welder
🇧🇩🇧🇩🇧🇩👍👍❤️❤️
Error E 01 Reset
Атаңның басы халық партиясы
Move your head
Sorry sir, I'll keep that in mind for next time.
I think you did a pretty good job, you just need a different camera angle is all. 😊🌎✨
٠
٣
٣
so ah....ahem...this is ah....so ah...ahem.....so ah, and ah....ah it was... ah back in the 3rd grade ....that I ah ...developed ...my ah ... show and tell skills and ah....ahem
Tee welds...big deal! Do butt welds and weld a box with a water tight corner.
No problem at all.
@@serralaser Please make a video of a water tight box showing the ability to slow down enough to control the weld in a three weld seam converging corner.
Er,25problam,how