In AOMEI Backupper version 7.0. The SYSTEM "Disk Clone" feature is only available in the Pro version. DATA "Disk Clone" is still available in the Standard version.
Alternative to the people if the video didn't fix: If you have the "winload.efi 0xc0000f" error or if you restarted your computer (probably with a windows update) to be stuck in the Windows Recovery Menu and can't even do a System Restore, Repair, and even you cannot use commands in the command prompt, try what I found out after several hours of research: It seems that several Updates tend to mess up your booting drive, and changes your boot drive partition by itself, causing the computer to boot up a system which is obviously not there. For this solution, you need to be able to use the Command Prompt. You can reach it by pressing F8 when booting or just from the Windows 10's Recovery screen. - Open up the Command Prompt, and type one of the following lines to find out which drive partition your W10 is installed on: echo list volume | diskpart or bcdedit /enum active - Once you figure out which Partition your system is installed on, (it is commonly C: , but in my case it was G:) move on to the next step:
To change the windows boot device (efi partition) use the following command and hit enter: (Replace "c" at the end with the one you found out in the previous step.) bcdedit /set {bootmgr} device partition=c: After you hit enter you should receive the message "Operation was completed succesfully." Then you can right away close the Prompt, restart your computer. Afterwards, I hope you will see your lovely desktop. This was my case. Otherwise , I wish you good luck
I don’t think ppl understand the problem is I can’t access windows automatic repair I can’t access the area where you factory reset so I can’t get to the 2nd option
I have Win11, error 0x000000e (winload.efi) and this is my solution in CMD (modified solution from Leo Moura - thanks): Command 1: “diskpart” Command 2: “list volume” Command 3: “select volume 2” (I have win installed on disk C without partition, volume 2 is hidden partition for system) Command 4: “assign letter V” Command 5: “exit” Command 6: “bcdboot C:\windows /s V: /f UEFI Then reboot and in BIOS change boot disk (new "disk" V). But I recommend reinstall windows after this, because this is emergency solution only.
Como consegui: Abra o CMD: todos os comandos são sem as aspas Comando 1: “diskpart” Comando 2: “list disk” Comando 3: “select disk X” (sendo X o número do disco onde tá o Windows) Obs: Se seu HD tiver partição, você vai precisar dar o comando “select partition X” (sendo X a partição onde está a recuperação do sistema). Comando 4: “assign letter V” Comando 5: “exit” Comando 6: “bcdboot C:\windows /s V: /f UEFI Agora, reinicie o Windows e entre na BIOS, vá em BOOT e coloque o novo disco criado como boot primário, as outras opções, se houver, pode deixar desabilitado. Reinicie o PC que deve funcionar.
I AM TRYING TO INSTALL WINDOWS 10 32-BIT FROM THE INSTALL ISO TRANSFERRED TO USB PENDRIVE. 64-BIT INSTALL WORKS. BUT 32-BIT INSTALLER SAYS \WINDOWS\SYSTEM32\WINLOAD.EFI MISSING.
Open CMD and enter the following commands: Command 1: “diskpart” Command 2: “list disk” Command 3: “select disk X” (being X the number of the Windows disk) Ps: If your HD have some partition, you will need enter the command “select partition X” Obs: Se seu HD tiver partição, você vai precisar dar o comando “select partition X” (being X the number of recovery sistem partition) Command 4: “assign letter V” Command 5: “exit” Command 6: “bcdboot C:\windows /s V: /f UEFI Now, reboot the system e go to BIOS, go to boot e choose the new disk created as priority boot. Save and reboot. Thanks me later.
In AOMEI Backupper version 7.0.
The SYSTEM "Disk Clone" feature is only available in the Pro version.
DATA "Disk Clone" is still available in the Standard version.
Alternative to the people if the video didn't fix:
If you have the "winload.efi 0xc0000f" error or if you restarted your computer (probably with a windows update) to be stuck in the Windows Recovery Menu and can't even do a System Restore, Repair, and even you cannot use commands in the command prompt, try what I found out after several hours of research:
It seems that several Updates tend to mess up your booting drive, and changes your boot drive partition by itself, causing the computer to boot up a system which is obviously not there.
For this solution, you need to be able to use the Command Prompt.
You can reach it by pressing F8 when booting or just from the Windows 10's Recovery screen.
- Open up the Command Prompt, and type one of the following lines to find out which drive partition your W10 is installed on:
echo list volume | diskpart
or
bcdedit /enum active
- Once you figure out which Partition your system is installed on, (it is commonly C: , but in my case it was G:) move on to the next step:
To change the windows boot device (efi partition) use the following command and hit enter:
(Replace "c" at the end with the one you found out in the previous step.)
bcdedit /set {bootmgr} device partition=c:
After you hit enter you should receive the message "Operation was completed succesfully."
Then you can right away close the Prompt, restart your computer.
Afterwards, I hope you will see your lovely desktop. This was my case.
Otherwise , I wish you good luck
YOU JUST SAVED MY LIFE, OMG!!!!
@@arturquadros9079 I'm so glad I helped you Artur ^^
It’s just telling me access denied every single time
I can’t open my command prompt it’s very frustrating
thank you so much 🙏🏻
I don’t think ppl understand the problem is I can’t access windows automatic repair I can’t access the area where you factory reset so I can’t get to the 2nd option
I have Win11, error 0x000000e (winload.efi) and this is my solution in CMD (modified solution from Leo Moura - thanks):
Command 1:
“diskpart”
Command 2:
“list volume”
Command 3:
“select volume 2” (I have win installed on disk C without partition, volume 2 is hidden partition for system)
Command 4:
“assign letter V”
Command 5:
“exit”
Command 6:
“bcdboot C:\windows /s V: /f UEFI
Then reboot and in BIOS change boot disk (new "disk" V).
But I recommend reinstall windows after this, because this is emergency solution only.
on the recovery screen showing this error, i cant open command prompt, shift + f10 doesnt do anything nor does f8
Thank you. It helped me ☺️
same
Como consegui:
Abra o CMD: todos os comandos são sem as aspas
Comando 1:
“diskpart”
Comando 2:
“list disk”
Comando 3:
“select disk X” (sendo X o número do disco onde tá o Windows)
Obs: Se seu HD tiver partição, você vai precisar dar o comando “select partition X” (sendo X a partição onde está a recuperação do sistema).
Comando 4:
“assign letter V”
Comando 5:
“exit”
Comando 6:
“bcdboot C:\windows /s V: /f UEFI
Agora, reinicie o Windows e entre na BIOS, vá em BOOT e coloque o novo disco criado como boot primário, as outras opções, se houver, pode deixar desabilitado. Reinicie o PC que deve funcionar.
I AM TRYING TO INSTALL WINDOWS 10 32-BIT FROM THE INSTALL ISO TRANSFERRED TO USB PENDRIVE. 64-BIT INSTALL WORKS. BUT 32-BIT INSTALLER SAYS \WINDOWS\SYSTEM32\WINLOAD.EFI MISSING.
Still not win10 install due to above error code 0xc000000f as stated File \Windows\system32\winload.efi please laptop Sony VAIO.........
Thankss♥️♥️
When select and assig it says no voulume specified
You can input list disk first to check the disk number and then input the right disk number to select it.
muchas gracias me funciono GG
thank god i dualbooted windows 10 with 8.1
the winload.efi problem is on 8.1 so i always select windows 10 to use
OMG TYSM
This worked thank you ☺️
se eu nao consigo entrar no windows como posso clona-lo ?????
Você está dizendo que não pode começar? Se você não conseguir inicializar, é recomendável criar um disco inicializável.
@@AOMEITech Obrigado por ter respondido eu já resolvi criando um pendrive com o lazesoft ele reparou os ficheiros de inicialização.
im having this problem on windows 11 but nothing works, i tried liek 10000000 videos but i cant fix my pc :( can you help me AOMEI?
If the video cannot help, you can also contact our support team via email to get professional help.
Can you help me I can’t go to advanced option pls ..
Do you mean you have no advanced option?
After i put it in command mode, it shows me the error.. Help pls
Hi dear, what is the error?
Yo I cloned my crap drive to 2 better drives and now this issue is occuring with all my drives
Did you clone with AOMEI Backupper?
♥️
Open CMD and enter the following commands:
Command 1:
“diskpart”
Command 2:
“list disk”
Command 3:
“select disk X” (being X the number of the Windows disk)
Ps: If your HD have some partition, you will need enter the command “select partition X”
Obs: Se seu HD tiver partição, você vai precisar dar o comando “select partition X” (being X the number of recovery sistem partition)
Command 4:
“assign letter V”
Command 5:
“exit”
Command 6:
“bcdboot C:\windows /s V: /f UEFI
Now, reboot the system e go to BIOS, go to boot e choose the new disk created as priority boot. Save and reboot. Thanks me later.
@@AOMEITech after the last command it says failure when attempting to copy boot files. what should i do? thank you
Well it says 0xc000000f
Well like i put those command some worked and some ones says somethink diffrent
@@ayogrox Did you solve the errors now.
@@AOMEITech well i tried and not think its not missing it got deleted and i was not on the laptop and i was turned off and boom deleted
Windows 11 windload missing...
You can also have a try on Windows 11 with these methods.
U already fixed it? I just got the same error on W11
@@lorenzunterberger7993 Yes, turns out when updating W11 kept swithcing my boot drive so I continued with my SSD and it continued updating :)
Also w11,am trying to repair but it's saying "windows resource protection could not start the repair service"
@@gedeonrush2612 Hi dear, you can get further help from the AOMEI support team via email..
hello what ur email support
cannot with win 11
It's on the "ABOUT" page.