Step by step how to waterproof concrete slab correctly. EP waterproofing solution

Single solution waterproofing for all construction
EP Waterproofing Nano Solution is designed from high quality polymers supplied as "Ready to Use". From retaining walls, potable water tanks, driveways, exposed concrete slabs, roofs, basements and balconies.
Perfect for commercial and repair projects. A Stand Alone waterproofing solution.
Easy to use: Spray or brush application.
Trafficable in less than 3 hours.
Penetrates over 25mm into concrete.
Damage free with ZERO defects.
Four easy steps.
1. Make sure the surface is clean & dry with no oils, grease or paint.
2. Spray One (1) coat of EP Waterproofing using a garden type sprayer (low pressure) to the concrete
3. Leave to dry for a minimum of 24 hours.
4. Concrete can be covered with water for water tightness testing.
Tested and Certified.
Tested by GHD Laboraties Australia. Negative Hydrostatic Pressure 60Ib/in2 or 135 ft of water head pressure.
Tested by SIRIM to BS/EN 1881 : Part 122 - Passed.
Tested by SIRIM to BS 6920-Part-2000-Potable Water Tanks.
Tested by China State Government Testing to JCT1018: Infiltration : Height is 28mm.
#waterproofingmalaysia #ecofriendly #waterproofing
Contact team EP [e-mail]
www.epasia.net

[@austintang5826]

How long it takes to dry off?

[@epasiaasiasmosttrustedsolu8441]

leave to dr for 24 hours. But trafficable in 3-4 hours