Captain Pete Culler who wrote several books on traditional sails ,explains that the sprit rig requires a rotating mast to prevent the sail from binding to the mast,which should be lubricated with tallow,another traditional item. They should also have vertical seams in the sail if it’s a big sail as this makes it set better .
Pete Culler also laced the sail on the mast differently to prevent binding when lowering the sail. If you don't lower the sail then the way you did it would probably work just fine. 😊
You need to learn and use some other knots… the clew, spar and the loop around the bolt would all be better served using bowline knots instead… just a suggestion. Also the threading of the sail to the mast was far too tight. It would be much better served by loops at each of the grommets to keep it from binding and allowing the sail to spin and move more freely around the mast. Beyond that, very nice work on the spar and mast… once you get the bugs out I’m sure you’ll be happy with your rig!… nice video, thanks for sharing!
Would a looser lacing have the effect of mast rotation without having the mast rotate? I have never heard of a rotating mast. I think your lacing is too tight.
Traditional sprit rigs off the East coast of Canada and the USA, used small poplar trees to provide the mast and sprit. (they grow everywhere, from small to large). With lumber, you make the mast and sprit from square stock, then cut them to octagonal's and then start planing them round. There are a couple of videos of Irish traditional boat builders doing this. Although they were made some years ago, they should still be on You Tube.
If you watch my video "Make Your Own sail, you should find all the information there. Otherwise, you can get a diagram from Boat Builders Central in Fort Pierce, Florida. Jeff Morrow, 772-742-8535
Thanks for including the diagram of the sail with names. I've mostly learned them but it's helpful while still learning 😉👍
Captain Pete Culler who wrote several books on traditional sails ,explains that the sprit rig requires a rotating mast to prevent the sail from binding to the mast,which should be lubricated with tallow,another traditional item. They should also have vertical seams in the sail if it’s a big sail as this makes it set better .
Pete Culler also laced the sail on the mast differently to prevent binding when lowering the sail. If you don't lower the sail then the way you did it would probably work just fine. 😊
You need to learn and use some other knots… the clew, spar and the loop around the bolt would all be better served using bowline knots instead… just a suggestion. Also the threading of the sail to the mast was far too tight. It would be much better served by loops at each of the grommets to keep it from binding and allowing the sail to spin and move more freely around the mast.
Beyond that, very nice work on the spar and mast… once you get the bugs out I’m sure you’ll be happy with your rig!… nice video, thanks for sharing!
Thanks a lot from Mendoza (Argentina). I building a D5 Dinghy. You are a good teacher !! Good video.
Great vid! good how to info and great music! :)
Thanks for the video !
Thank you for sharing ypur experiênce!
Maybe thats a traditional way but on the optimist I sailed when I was a kid we had individual pieces of rope coming out of each hole.
Would a looser lacing have the effect of mast rotation without having the mast rotate? I have never heard of a rotating mast. I think your lacing is too tight.
Where to find round wooden spars like those in this video?
Traditional sprit rigs off the East coast of Canada and the USA, used small poplar trees to provide the mast and sprit. (they grow everywhere, from small to large).
With lumber, you make the mast and sprit from square stock, then cut them to octagonal's and then start planing them round. There are a couple of videos of Irish traditional boat builders doing this. Although they were made some years ago, they should still be on You Tube.
Hi, where did you find the diagram of the sail with its dimensions? Also, what are the dimensions of your boat?
If you watch my video "Make Your Own sail, you should find all the information there. Otherwise, you can get a diagram from Boat Builders Central in Fort Pierce, Florida. Jeff Morrow, 772-742-8535
God job
Materials 3 bucks + man power 300 bucks + sprit 1,000 bucks.🎉
7:28 won’t that screw cause the mast to crack?
predrilled hole I think....
The pressure on that point isn’t likely to stress the mast.
first