i have 2 of these and both have had the same issue. its an expected issue, going into full auto on semi at times. i replaced the hammer (just the hammer) on one and it fixed it until it inevitably happened again. i expected it to break but it happened quite quickly, same with the other. im considering getting a steel replacement hammer set and i think any g18 or aap set will do but i was wondering if you have had such issues after using yours for quite some time, and if you made upgrades to the hammer set after this video was posted?
I haven't touched the 18C hammer assembly in a while but iirc that issue is because the hammer sear is not catch/holding the hammer. You gotta check that the trigger bar is not getting stuck, that the hammer sear is making full travel and that the hammer is being held by the hammer sear.
i know that issue ive butchered mine and put it back together im even using a g17 hammer assymbly thats modified so i can full auto so whats broke on your case is the disconnector for the hammer thats being pushed by the trigger bad on the right side if thats stock that gets worn out too change it to steel and that problem is fixed. i had the aap and this unit and i sold my aap just because the we galaxy is just better once u reinforced the brittle parts. brittle parts are the extractor on the bolt it breaks alot u need a steel on thats being cnc luckily ctm makes those for 7$ each the next one that breaks is the guiderod screw assymbly good thing here in the phillipines someone made out of steel which i upgraded too. and its been 2-3 years since i had mine and it never broke again. i also got a carbine kit with a 500mm inner barrel and a red hand guard. over all my experience with this unit once u illuminated the probllems out of the box is very good. i made my dmr galaxy to shoot 5j using propane. i also have a gold one that shoots 3j with a 200mm inner barrel with the same upgrades.
i have 2 of these and both have had the same issue. its an expected issue, going into full auto on semi at times. i replaced the hammer (just the hammer) on one and it fixed it until it inevitably happened again. i expected it to break but it happened quite quickly, same with the other. im considering getting a steel replacement hammer set and i think any g18 or aap set will do but i was wondering if you have had such issues after using yours for quite some time, and if you made upgrades to the hammer set after this video was posted?
I haven't touched the 18C hammer assembly in a while but iirc that issue is because the hammer sear is not catch/holding the hammer. You gotta check that the trigger bar is not getting stuck, that the hammer sear is making full travel and that the hammer is being held by the hammer sear.
i know that issue ive butchered mine and put it back together im even using a g17 hammer assymbly thats modified so i can full auto so whats broke on your case is the disconnector for the hammer thats being pushed by the trigger bad on the right side if thats stock that gets worn out too change it to steel and that problem is fixed.
i had the aap and this unit and i sold my aap just because the we galaxy is just better once u reinforced the brittle parts. brittle parts are the extractor on the bolt it breaks alot u need a steel on thats being cnc luckily ctm makes those for 7$ each the next one that breaks is the guiderod screw assymbly good thing here in the phillipines someone made out of steel which i upgraded too. and its been 2-3 years since i had mine and it never broke again. i also got a carbine kit with a 500mm inner barrel and a red hand guard. over all my experience with this unit once u illuminated the probllems out of the box is very good. i made my dmr galaxy to shoot 5j using propane. i also have a gold one that shoots 3j with a 200mm inner barrel with the same upgrades.
Did you had to sand down the red nozzle like you did on the original one?
No
have you had a problem with the nozzle carrier(slider)? mine looks really worn and it stick some times.
No, I haven't had an issue like that.
Where can I get that piece that catches the nozzle and pulls it out of the hop up?
Evike.com
@@ema1671can u link it exactly
@@Chibibola buy it at ctm dont buy the ones made by we they will break again
Where’d you buy the nozzle and nozzle return spring from? I’m not having the greatest luck googling
The nozzle came from Evike, the spring was from hadron in UK.
or just use a kco2 nozzle return spring its the same specs altho its longer but if u cut it in half u have 2 nozzle spring haha