Big shout out from Australia .... THANKS SO MUCH .. I understand you get lots of questions on Scooters you didnt even sell ... But you are a life saver ... Thanks again I am in your debt
Just watched these videos and rode mine for the last couple of hours for the first time and it is amazing. Blows my wide wheel away. Just an amazing scooter, so much fun. I had to set P7 (initial acceleration) on 5, which is the slowest acceleration. The acceleration in dual motor turbo mode is so quick it was too much for me to handle on anything below 5!
4nlimited3dition I’ve been using it regularly over six months now and it’s still amazing and like new. I’m actually surprised I haven’t had any issues because I ride it a lot, over long distances, and living in the city here it’s a lot of stop and go. But no problems to report. Still rides and accelerates as it did on day one. No wobbly stem, no motor issues. Just a couple of normal wear and tear matters that any scooter entails - once I had to have a bike shop true one of the disc brake rotors because I could hear a brake pad rubbing up against it at each rotation. But there’s plenty of reasons why that may have gotten bent with all the riding I do, and it was cheap to have trued. And a couple of weeks ago I got a flat tire, which can happen to any scooter with air tires. But fluidFree Ride shipped a tube and tire right away. Probably just needs the tube.
@@LewyLewy2008 Nice to hear that. I've been planning to get one as well, but I've also been seeing many people having problems with their stems snapping on road bumps and major injuries from the bolts getting loose, so had to hold off the purchase until they get those issues with the design fixed. Have you checked the main bolts on yours recently? Mostly the main stem bolt apparently can get loose over time and eventually snap. That's my main concern.
For my Kaabo Mantis Pro, I used a product called Sugru (search in eBay) it's like a black Blu Tack, is mouldable and sets solid and waterproofs any little cracks. For any larger holes, it's black silicone in a Gun.
PA 0 = 0 battery Regeneration? So If i Want IT to recharge while hills need to Put IT higher? Is there a Option to Reset the Controller to custom settings? Also is there any battery saving If i Put only 50 or 75% in Motor ? P9 1 2 or 3 or is IT Just for start driving or constantly less motorpower?
P7 is the main mode you will mess with, 0 is ridiculously fast, the tires spin a lot when set on Dual wheel mode with Turbo mode activated. I recommend setting P7 on 3 for a smooth start than fast boost as you pick up speed. If you want to cruise more then set P7 on 5 with Eco mode on with Single wheel mode. This scooter is a animal.
Hey fluid, what are the differences between the eco turbo button (yellow button) and the single dual button (red button)? And also, when i bought the scooter, when i brake, the scooter sorta vibrates, is that something got to do with the ABS that u were talking about at the end of the video, if so how can i get rid of that and just have normal breaking?
Hey Jac - The ECO/TURBO switch regulates the power of your scooter. ECO mode reduces torque and top speed to maximize range. TURBO mode has no restriction of power. The SINGLE/DUAL switch toggles single or dual motor drive. By pressing down the button DUAL motor drive is activated. When the button is not pressed, SINGLE (rear) motor drive is activated. For Maximum range, select ECO mode and SINGLE motor drive. For maximum power and speed, select TURBO mode and DUAL motor drive. Regarding the vibration, please contact us with your order number at support@fluidfreeride.com so we can help you out.
I have the Ultra 2 and it wasn't as powerful as it was when I drove it couple weeks ago. I had an incident where a car hit my right brake and the lcd screen and it was hanging. I got it repaired they guy at the shop said it was an easy fix. But now my power seems less. But it did top off at good speed didn't get to see the mph. after driving it for an hour it got weak and I turned it off then back on then it was able to go but after half a block it got weak and slow like 10mph. After two more blocks I stopped decided to turn it off and it wouldn't turn back on. I got a ride back home and when I got home I pressed the power button and it turned back on. I am thinking because the LCD screen was replace they are some setting that may be off. The voltage on the manual showed it's a 72 volts. But the scooter is showing 60 volts. I moved up to 72 volts and the LCD blinks off and on and there was no movement at the throttle. I moved it back to 60 volts and the scooter moves but it.s iin my room so I haven't test it until tomorrow because it's 2 am now. II do plan to go back where I bought which is same place they repaired tomorrow. Originally when I first got it like 45 days ago after driving it for a couple days all was great. Then the next day I went to turn it on and the LCD blinked then it turned off right away. It would not turn on. The place where I bought it open the scooter messing with the wires and I think the LCD and he was able to get it on. Anyways this is the second time it turned off on me. The first time was with the original before the incident I had with the car. Any advice anyone I would appreciate it. Thank You!
Great tutorial on the display. No going back to P9, in my owners manual indicates, 1max,2mid,3normal. But you said 3 is the max, did you make a mistake or my manual is not right? Thanks
I wil get the international version of the mantis pro+, it will be unlocked. How to set it up that it goes to 20kmh every time I switch off the scooter?
Hi! Thx sooooo much for your explication!! But i have a question about the loading charging circle, How i how to do: Charge it only when it is at 10% or i can chargeit when it's at 60% ? I have a Dualtron (1.5 MX) EX 60V 18.2AH Thx in advance for a answer, THX :)
You can charge the scooter at any time you need. Just run the cells empty or close to empty from time to time (like 1-2 times per month) to have them go through a full charge.
So I had pa i had it set to 1 at 100% battery and my scooter died the other day. the display worked still and after about 10 min the scoyer started working again. Now its happened a second time display still works but now no power at all to the wheels its been several hours and the lights on the body are not working either ...HELP PLEASE
Eran Pilton Great question Eran. The answer is The exact same! I have a WW II + and LOVE IT! Damn thing is like a motorcycle. Ripping acceleration. Enjoy!
ES Rider Get the WOLF WARRIOR II +. I just got one and it’s like I am back to my sport bike days. This thing pulls like a freight train! So much fun and face meltingly fast!
60V kaabo scooters should be set to 53V. That setting does not govern actual controller shut off which is in the 40s - it only governs how battery charge status is shown in display.
Good evening! I recently bought Kaboo Mantis 10 Base 18.5ah 60V, not professional. I used it, there is no manual, I found it on the Internet - it did not help. Such a scooter for the first time, in the display settings it is indicated that the scooter turns off at 53V. Today it was 58, I was driving and turned off on the go, although the charge remained, how to solve this problem? If he turns off on the Chinese Kugoo M4 pro because he can no longer drive, then he immediately cuts off. I had to walk home. What is its minimum voltage, if max 67V. Thanks! And it does not show the speed correctly, in the manual in the P2 motor magnetic pole settings - you need to specify 30, but it does not show correctly anyway.
Hi, I'm reaching out to as many people as i can. I have a mantis 10 DUO 18.2AH 60V scooter SN KBTL121120082331. I'm trying to find a wiring diagram for these two black ESC's (controller boxes) but no one can help me so far. Is there anyone here that could maybe supply me with a photo of how the connects are all set up? or a diagram or anything. I have tried the manufacturers and many stores. No one can help me so far.. Please if anyone has the model with the two black controllers can you please please help me with a photo or anything :( I beg you.
look around on support.fluidfreeride.com - you will find an introduction to Mantis wiring with diagram and video. That should help. However Kaabo changes controllers all the time so the best place to check would be your place of purchase.
Love the way it is explained.
One suggestion. P0-Pd should have been explained in description too. This will also help for quick text reference.
best tutorial on the minimotors displaay
Big shout out from Australia .... THANKS SO MUCH .. I understand you get lots of questions on Scooters you didnt even sell ... But you are a life saver ... Thanks again I am in your debt
I'm about to buy one of these so this video will be of great benifit. Thank you
Perfect video, got exactly what i wanted you of it. Thank you!
Thsnk you so much for this video, it was so easy to set it up my Mantis 10 Pro Plus.
Just watched these videos and rode mine for the last couple of hours for the first time and it is amazing. Blows my wide wheel away. Just an amazing scooter, so much fun.
I had to set P7 (initial acceleration) on 5, which is the slowest acceleration. The acceleration in dual motor turbo mode is so quick it was too much for me to handle on anything below 5!
you could consider change the P9 to smaller numbers
Michael Sha thank you.
@@LewyLewy2008 How has it been this far? any issues with the stem or anything?
4nlimited3dition I’ve been using it regularly over six months now and it’s still amazing and like new. I’m actually surprised I haven’t had any issues because I ride it a lot, over long distances, and living in the city here it’s a lot of stop and go. But no problems to report. Still rides and accelerates as it did on day one. No wobbly stem, no motor issues. Just a couple of normal wear and tear matters that any scooter entails - once I had to have a bike shop true one of the disc brake rotors because I could hear a brake pad rubbing up against it at each rotation. But there’s plenty of reasons why that may have gotten bent with all the riding I do, and it was cheap to have trued. And a couple of weeks ago I got a flat tire, which can happen to any scooter with air tires. But fluidFree Ride shipped a tube and tire right away. Probably just needs the tube.
@@LewyLewy2008 Nice to hear that. I've been planning to get one as well, but I've also been seeing many people having problems with their stems snapping on road bumps and major injuries from the bolts getting loose, so had to hold off the purchase until they get those issues with the design fixed. Have you checked the main bolts on yours recently? Mostly the main stem bolt apparently can get loose over time and eventually snap. That's my main concern.
Excellent video thanx
For my Kaabo Mantis Pro, I used a product called Sugru (search in eBay) it's like a black Blu Tack, is mouldable and sets solid and waterproofs any little cracks. For any larger holes, it's black silicone in a Gun.
Where did you add the sugru?
PA 0 = 0 battery Regeneration? So If i Want IT to recharge while hills need to Put IT higher?
Is there a Option to Reset the Controller to custom settings?
Also is there any battery saving If i Put only 50 or 75% in Motor ? P9 1 2 or 3 or is IT Just for start driving or constantly less motorpower?
Thank you! I just set my Thunder settings identical to your except for voltage and I turned off cruise control. Very informative!
P7 is the main mode you will mess with, 0 is ridiculously fast, the tires spin a lot when set on Dual wheel mode with Turbo mode activated. I recommend setting P7 on 3 for a smooth start than fast boost as you pick up speed.
If you want to cruise more then set P7 on 5 with Eco mode on with Single wheel mode.
This scooter is a animal.
Great video. Is wheel diameter the only settings difference between the mantis pro and the wolf?
Thanks
Tanks you, very good video!! 🙌
👍 thanks for this info
Which apps in general could be used with the Kaabo Mantis and the EY3-Display?
well done !
I thought my scooter was faulty when it vibrates when braking turns out it was ABS all along. Learn something new everyday.
Hey fluid, what are the differences between the eco turbo button (yellow button) and the single dual button (red button)? And also, when i bought the scooter, when i brake, the scooter sorta vibrates, is that something got to do with the ABS that u were talking about at the end of the video, if so how can i get rid of that and just have normal breaking?
Hey Jac - The ECO/TURBO switch regulates the power of your scooter. ECO mode reduces torque and top speed to maximize range. TURBO mode has no restriction of power.
The SINGLE/DUAL switch toggles single or dual motor drive. By pressing down the button DUAL motor drive is activated. When the button is not pressed, SINGLE (rear) motor drive is activated.
For Maximum range, select ECO mode and SINGLE motor drive. For maximum power and speed, select TURBO mode and DUAL motor drive.
Regarding the vibration, please contact us with your order number at support@fluidfreeride.com so we can help you out.
Ima say, from my experience. Single motor takes up more battery than dual motors on eco mode. I own a kaabo wolf warrior.
@@kendrickmelendez8185 only time I use single is when it's wet and I need to use less torque for safety
I have the Ultra 2 and it wasn't as powerful as it was when I drove it couple weeks ago. I had an incident where a car hit my right brake and the lcd screen and it was hanging. I got it repaired they guy at the shop said it was an easy fix. But now my power seems less. But it did top off at good speed didn't get to see the mph. after driving it for an hour it got weak and I turned it off then back on then it was able to go but after half a block it got weak and slow like 10mph. After two more blocks I stopped decided to turn it off and it wouldn't turn back on. I got a ride back home and when I got home I pressed the power button and it turned back on. I am thinking because the LCD screen was replace they are some setting that may be off. The voltage on the manual showed it's a 72 volts. But the scooter is showing 60 volts. I moved up to 72 volts and the LCD blinks off and on and there was no movement at the throttle. I moved it back to 60 volts and the scooter moves but it.s iin my room so I haven't test it until tomorrow because it's 2 am now. II do plan to go back where I bought which is same place they repaired tomorrow. Originally when I first got it like 45 days ago after driving it for a couple days all was great. Then the next day I went to turn it on and the LCD blinked then it turned off right away. It would not turn on. The place where I bought it open the scooter messing with the wires and I think the LCD and he was able to get it on. Anyways this is the second time it turned off on me. The first time was with the original before the incident I had with the car. Any advice anyone I would appreciate it. Thank You!
Do these setting work for the mantis 10 elite. cheers
Great tutorial on the display.
No going back to P9, in my owners manual indicates, 1max,2mid,3normal.
But you said 3 is the max, did you make a mistake or my manual is not right?
Thanks
3 is max dude
@@perrygoldstein2217 3 is max, but my manual is wrong.. Chinese writers probably..
@@republicofu.s9642 There is an online manual with all the correct instructions store.urban360.es/wp-content/uploads/2020/05/Mantis-manual.pdf
nice 1 sir ,, i have a kaabo mantis 8 ,, is it possible to change the controler like yours eye trottle ? is complicated or not? thank u sir
I wil get the international version of the mantis pro+, it will be unlocked. How to set it up that it goes to 20kmh every time I switch off the scooter?
Hi! Thx sooooo much for your explication!!
But i have a question about the loading charging circle, How i how to do:
Charge it only when it is at 10%
or i can chargeit when it's at 60% ?
I have a Dualtron (1.5 MX) EX 60V 18.2AH
Thx in advance for a answer, THX :)
You can charge the scooter at any time you need. Just run the cells empty or close to empty from time to time (like 1-2 times per month) to have them go through a full charge.
How do you unlock the speed limit on a macho pro 10 let me know peace
The accent legitimizes everything lol
brandon kush French one 🧐
@@bunit8 I thought it was German.
@@cargobob7817 its German
Definitely GERMAN
Wich button is for showing the% charge of battery for me is every time 100%
Hi, I was wondering if the scooters have bluetooth and an unlocking system
No, Bluetooth
Yes
So I had pa i had it set to 1 at 100% battery and my scooter died the other day. the display worked still and after about 10 min the scoyer started working again. Now its happened a second time display still works but now no power at all to the wheels its been several hours and the lights on the body are not working either ...HELP PLEASE
Can you put a mini motors display on any scooter
the displays are usually paired with the controller. So unfortunately you cannot.
What are the Display settings for kaabo wolf warrior?
Eran Pilton Great question Eran. The answer is The exact same! I have a WW II + and LOVE IT! Damn thing is like a motorcycle. Ripping acceleration. Enjoy!
Is this for wolf warrior?
Hey if the p8 is set to like 10 how fast will the scooter go in km/h
No
Please do an E-ABS tutorial. 😅
Hey fluid again, last question, how do i get my mantis to go top speed of 60?
top speed can be best reached in dual motor and turbo mode on a flat surface.
@@fluidfreeride my scooter kaabo mantis plus is not going faster than a 25kmh how can i unlock it to get faster..? Please help me
@@edvine4641 there is probably a speed limiting wire
@@edvine4641 hey bro, did you fix it?
Good video. I am trying to decide which new scooter to get, this or the zero 10X. I do like the display much more on this.
ES Rider Get the WOLF WARRIOR II +. I just got one and it’s like I am back to my sport bike days. This thing pulls like a freight train! So much fun and face meltingly fast!
🎉
What is p2 ?
Whats the voltage shut down of the Mantis 10 pro 60V?
60V kaabo scooters should be set to 53V. That setting does not govern actual controller shut off which is in the 40s - it only governs how battery charge status is shown in display.
@@fluidfreeride Thank you! How can I set it up to 53V? And how can I check which voltage shut off is set up?
Good evening! I recently bought Kaboo Mantis 10 Base 18.5ah 60V, not professional. I used it, there is no manual, I found it on the Internet - it did not help. Such a scooter for the first time, in the display settings it is indicated that the scooter turns off at 53V. Today it was 58, I was driving and turned off on the go, although the charge remained, how to solve this problem? If he turns off on the Chinese Kugoo M4 pro because he can no longer drive, then he immediately cuts off. I had to walk home. What is its minimum voltage, if max 67V. Thanks! And it does not show the speed correctly, in the manual in the P2 motor magnetic pole settings - you need to specify 30, but it does not show correctly anyway.
hello, I have the same problem, what was the solution?
What mean abs setting
How to se battery percentage?
the battery status can be seen in the middle of the display (in %).
Why does my mantis pro not charge past 60% after 12 hours still at 60%?????? My voltage is at 59.6
Replace the fuse in the scooter, is burning up. you need a 10amp fuse. Open the scooter remove battery. one of the wires inside a fuse replacement
@@PSTRIPPLEE hey so if the voltage is at 50 AB’s I’ve pulled the fuse it looks fine, what should I try then?
Hello how can i unlock this scooter to reach 60kmh?
Hey, did you find out about that?
Where is the odometer reset setting?
When and were can order the mantis pro ..with updated stem ????
That is a abit pricey, i can get version 3 mantis pro lg battery 2020 version with shipping just for £1000 😚
@@PSTRIPPLEE where?
@@maxl7827 Alibaba from Yesloud
@@PSTRIPPLEE Thanks, did you buy a mantis pro from there? What top speed you getting?
@@maxl7827 Yes
37-40mph
Anyone got a problem with the scooter randomly turning off/cutting out?
head over to support.fluidfreeride.com and search. probably brake sensor issue
Thank you, will do 👍🏻
I have a tf-100. And it have 5 gears not 3. Y
I'd be happy to do a shake down video if you send me one 😉 I could compare it to a beat my friends m365's
Hi, I'm reaching out to as many people as i can.
I have a mantis 10 DUO 18.2AH 60V scooter SN KBTL121120082331.
I'm trying to find a wiring diagram for these two black ESC's (controller boxes) but no one can help me so far.
Is there anyone here that could maybe supply me with a photo of how the connects are all set up? or a diagram or anything. I have tried the manufacturers and many stores.
No one can help me so far.. Please if anyone has the model with the two black controllers can you please please help me with a photo or anything :( I beg you.
look around on support.fluidfreeride.com - you will find an introduction to Mantis wiring with diagram and video. That should help. However Kaabo changes controllers all the time so the best place to check would be your place of purchase.
Omg.... he on x games mode...