@@Shabana_Parveez Hi.. How much time should v keep the casting to set in the mould? Also when should v sand it and color it? Is there any time limitation?
For that the solution should be mixed properly without any lumps,, but its practically quite impossible as the mixing process has to be done within less than a minute..otherwise the solution gets harder
Tapping on the sides and bottom of container will make any air bubbles release and come to the top. Similar to tapping cake batter on the counter before putting in the oven.
Hi.. it depends on the size of the hand actually..and also the container you are using..the bigger container needs more powder...so it is better to use smaller container where the hand is free enough to fit... I used 3-4 cups of moulding powder... I hope this helps !✨😊
It becomes easier to pull out the hand/foot if you apply some oil on it before dipping inside the moulding medium... The moulding solution becomes hard after few minutes and the texture is kind of "silicon/elastic".. it's easy to remove hand
Hi.. I am working on it to conduct.. it may take some time... I will give all the updates on my Instagram handle.. do follow me there if you are interested.. here is the link👉🏼 instagram.com/craft_blooming_hub/
Hi... It also depends on the container you are using... Use a narrow and a little long container.. wider container needs more powder and water and it will be just wastage... For 2 months baby hand take 3 cups (measuring) of moulding powder + 6 cups of water...
@@jinalparmar681 yes,its enough ..for both hands and feet... Just keep in mind that don't waste the powder and solution..you need to make it in ONE GO... I am telling this to you because it happened with me !!
Hi,, there is casting powders for elders as well... I made such casting of my parents.. you can check it out 👉🏼 ua-cam.com/video/0zkx5YluTBo/v-deo.html
Hi,, maine ye Amazon se purchase kiya hai.. I don't think aapko kisi shop pe milega... Please check the description box maine waha pe purchase link dala hua hai.. Thank You ✨
Hi,, yes you can..only if the process is successful in one go.. because babies keep on moving their hands and feet and by that time the molding mixture gets hard...so there is huge chance of wastage!
Ye Baby Casting Kit maine 799/- mey kharida hai Amazon se... Because this particular product is skin friendly for babies.. aap description box pe purchase link check kar sakte hai 😊 Thank you ✨
The product that I am using here is completely safe for babies.. its written on the package... You can check the product ,I have mentioned it in the description box.. thank you ✨
With this casting kit I am using in this video, you can cast both hands and both feets.. "Baby casting" ofcourse.. not the elder ones... Do check the purchase link I have mentioned in the description box.. thank you 😊
Do follow me on Instagram for more Craft ideas as I post my Craft works there regularly ✨
instagram.com/craft_blooming_hub/
How much will u charge to do this Madam
@@chaitalimr226 hi, it's 1200/- for kids
@@Shabana_Parveez Hi.. How much time should v keep the casting to set in the mould? Also when should v sand it and color it? Is there any time limitation?
@@Shabana_Parveez
First Ican use baby oil in hand .any infection is there
He will always remember this beautiful gift
❤️❤️🥰🥰
Please koi muje bata de pakistan main kahan available hai or kya price hai
Molding powder ko kaise mix kare , water me molding powder ko dale ya powder me molding powder dale
Fantastic🤘😝🤘. Well done💯👍👏
Thank You Abba ☺️❤️
Hi dear,, beautiful video… After casting can we frame them
Hello,, Thank you for reaching out... Yes you can frame it✨
Its simply superbbbb amdi
Order se bnate ho aap?
Hello,, yes... I work locally actually
Very nice... Do we need to varnish them after paint
Thank you... yes varnish is needed after applying the paint
olle baba tu❤
mur puali holeu kori dibi ha🥰
Bia hoi puali bona hunkale🤪 kori dim 🥰❤️
What can be done to keep it smooth and without bubble
For that the solution should be mixed properly without any lumps,, but its practically quite impossible as the mixing process has to be done within less than a minute..otherwise the solution gets harder
For a quicker mixing you can use a electric beater.. it works great
Tapping on the sides and bottom of container will make any air bubbles release and come to the top. Similar to tapping cake batter on the counter before putting in the oven.
Baby ke dono hand and foot ka krna ho to ye hi sab product double order kre? Water normal le ya cold?
Ji..aap double order kar sakte hai... Water normal/cold koyi bhi use kar sakte hai
@@Shabana_Parveez thank you 🤗
Is there any tip for hand casting since baby keeps on moving his hands
Hi.. I had done this when the baby was sleeping.. Its a matter of luck I would say😄 sound sleep is important for the bady to do this casting!!
Hi i have little doubt about this casting
How much quantity moulding powder is taken for hand mould
Hi.. it depends on the size of the hand actually..and also the container you are using..the bigger container needs more powder...so it is better to use smaller container where the hand is free enough to fit... I used 3-4 cups of moulding powder... I hope this helps !✨😊
I purches in flipcart moulding & costing powder they giveng one sheet instructions sheet but that one missing so any issue is there in powder
Hello reply me
Hi.. I didn't purchase it from Flipkart.. I got it from Amazon...and the product link is in the description box..you can check that out
Mam edu frame elli sigitte
One finger is broken from foot ... how I reset it plzzzzz rplllll mam🙏🙏🙏🙏
Hello,, I am sorry ma'am..you cannot repair this once it hardens
Plz canu tell me portion of water and alginate and casting pouder and water for one hand plz plz
If you are making it for a baby hand then you add 1 cup of alginate and 2 cups of water... 1:2 is the ratio
From wherd we order casting and moduling pawder
Hi... I have mentioned the purchase link of the product in the description box .. please check that out.. its available on Amazon
Is that moulding powder is elasticity .. how u removed the hand and foot ???? ... ..
It becomes easier to pull out the hand/foot if you apply some oil on it before dipping inside the moulding medium... The moulding solution becomes hard after few minutes and the texture is kind of "silicon/elastic".. it's easy to remove hand
so cute 😍😍😍😍
Thank you dear ❤️
Is powder mixed in hot water as it's used for baby...may be mom be concerned about cold
Never use hot water.. both for adults and babies..in hot water the powder gets hard very quickly.. so only use cold water or normal water
How much water i should used
Precious ❤️❤️❤️❤️❤️❤️
❤️❤️
What product use pls tell me
Hi...you can check the description box of the video.. I have mentioned all the products
Kitny time k liye dip kr k rakna h.....plz bata dain
Almost 2 minutes
Wow...
where did you buy?
Please check the description box.. I have given all the purchased links in the description box.. thank you 😊
Thank you
Baby ku thaniya hand moldind powder iruka??? Illaiya ??? Illana normal ella molding powder um use pannalama one month baby ku pls tell me,,,...
Hello,, I didn't understand your language.. I am so sorry.. can you please write in English or Hindi? Thank you
Thank you for this video
You're welcome 😊 Thank you for watching ✨
Please tell me the ratio for casting powder as well? (powder) 1:2 (water) only?
Hi,, I didn't follow any ratio for casting powder... You can adjust the consistency.. not so flowy ,not so thick.
Enjoy your video, can u please tell me the how much molding powder needed for big kids hand, i hv 350g.
Hi... For one hand I think 350g will be sufficient
Will you conduct any online class
Hi.. I am working on it to conduct.. it may take some time... I will give all the updates on my Instagram handle.. do follow me there if you are interested.. here is the link👉🏼 instagram.com/craft_blooming_hub/
Hi sis baby hand should not move in water till it gets dry
Hi,, there is no use of water dear
How much cast of this powder
How much quantity of water need to be added for casting Powder for 2months baby hand
Hi... It also depends on the container you are using... Use a narrow and a little long container.. wider container needs more powder and water and it will be just wastage... For 2 months baby hand take 3 cups (measuring) of moulding powder + 6 cups of water...
Mam class sollitharuvingala
Is this quantity enough for 1 year old baby and and foot casting?
Both hands and both feet
@@jinalparmar681 yes,its enough ..for both hands and feet... Just keep in mind that don't waste the powder and solution..you need to make it in ONE GO... I am telling this to you because it happened with me !!
Casting powder proportion with water??
Hi.. the casting powder and water ratio is 1:2 .. i.e if you take 1 cup of casting powder,,then add 2 cups of water in there !
Ye sirf baby k liye hi h.....bade use ni kar sakte🤔🤔🤔
Hi,, there is casting powders for elders as well... I made such casting of my parents.. you can check it out 👉🏼 ua-cam.com/video/0zkx5YluTBo/v-deo.html
Amazing work
Yeh moduling powder kha se milega i mean kis shop pr available hoga
Hi,, maine ye Amazon se purchase kiya hai.. I don't think aapko kisi shop pe milega... Please check the description box maine waha pe purchase link dala hua hai..
Thank You ✨
Can I make tow hands n tow feet of 11 months baby from this pack ?
Hi,, yes you can..only if the process is successful in one go.. because babies keep on moving their hands and feet and by that time the molding mixture gets hard...so there is huge chance of wastage!
I tried couple of times.but baby keep on moving her hand it didn't come properly.could you please help how did you make it
Hi... I did the whole process when the baby is sleeping... Sound Sleep is must to do the process... otherwise it will be of no use doing it
Simple when baby sleeping u can do
From where we order casting and moduling powder
Hii,, I ordered it from Amazon.. plz check the description box, I have mentioned all the purchase links pf the products ! Thank You 😊
How much time it will take to dry
The molding mixture hardens very fast..within 3-4 minutes... And the casting takes almost 12-16 hours to get hard
Awesome 🥺❤️
Thank you sis❤️😘
Hai madam product rate anutha plz
I bought this Baby Casting Kit for 799/- from Amazon...You can check the purchase links in the description box.. Thank you ✨
Tq madam
Step 1 step2 only
Casting fill chesina tharthava moulding ni enni days tharvatha remove cheyyali
Sorry I didn't understand your language... Please write in English or Hindi
When should we remove casting from the mould,,, how many hours or days
@@vimalaprasad4849 12 to 16 hours...for better result keep it for 24 hours !!
How much time we need to keep the hands
It takes almost 2-3 minutes to harden the casting solution
Product name plz
Hi,, its hand casting and molding kit.. please check the description box for the product detail
Hi,, its hand casting and molding kit.. please check the description box for the product detail
Superb
Hand and foot
For both ratio is 1:2?
Yes
Hii edhi nenu chesa but vest ipoendhi akka ma baby crying sleeping chesenapudu chesthunakuda ventane lechi crying dhini valla side effect emi leva
Plzzz reply me
@@lakshmimadhu2437 hi dear, I didn't understand your language..can you please write in English or Hindi ?
Akka ekkada order pettaru link pettagalara please
Sorry I didn't understand your language...can you please write im English or Hindi?
@@Shabana_Parveez where we order casting and molding powers and frame please share the link Sister
Here is the link 👉🏼 amzn.eu/d/ahZkQEi
Ye powder kaha mil sakta hai
Hi.. please check the description box of this video.. I have mentioned the purchase link of molding powder
Which type of color you used to paint casting??
Hi,, I used Pearl Acrylic Color, golden shade
One kit edhariki vasthundha andi
Can you please write in English or Hindi? I didn't understand your language
Any infection in baby hand madam
👌🏼💐
Beautiful❣️
Thank You ✨
Eye apka baby hai?
Hi...no..he is my nephew😊
How much coast
Hi, for hand+feet casting its 2500/- ..and only for hand or feet its 1600/-
How to order
Are you talking about the product?
I want 3d hand &foot casting of baby.
Impressions
For that you have to bring the baby to me.. I live here in Assam, Guwahati.. or you can make it by yourself just follow the tutorial !!
Lekin di price kitna lag jata hai
Ye Baby Casting Kit maine 799/- mey kharida hai Amazon se... Because this particular product is skin friendly for babies.. aap description box pe purchase link check kar sakte hai 😊 Thank you ✨
Ur baby 5 months madam
Hi,, he is my nephew.. he was 3 months old when I made these casting
Molding powder cost how much
Hi,, plz check the description box.. I have mentioned the purchase link of the molding powder
good job
Thank you ✨
Mam edu gatiyagta ella mam
Any infection baby hand in mixing
The product that I am using here is completely safe for babies.. its written on the package... You can check the product ,I have mentioned it in the description box.. thank you ✨
How many castings we can do with 1 kit?
With this casting kit I am using in this video, you can cast both hands and both feets.. "Baby casting" ofcourse.. not the elder ones... Do check the purchase link I have mentioned in the description box.. thank you 😊
@@Shabana_Parveez can we do dis fr 2month also there will be no side effects ha
@@chaitalimr226 yes you can.. this particular product that I have used in this video is completely safe for infants and toddlers
Thank you
Nice
How did u shape the hand in the down part?
I have smoothened it with sand paper
Beautiful
Thank you dear😊
How much time it take to get harder
For better result..leave it for 12-24 hours !
How much
Hi.. The product link is in description.. plz check✨
Is the casting powder and water ratio is 2:1?
No... The casting powder and water ratio is 1:2 .. i.e if you take 1 cup of casting powder ,then add 2 cups of water in there
Price yastu
Hii,, I ordered it from Amazon.. plz check the description box, I have mentioned all the purchase links pf the products ! Thank You 😊
There are bubbles
Where?
How minutes ago
Sorry? Didn't get you
Don't you think you are hurting that baby
It's celar
No I really don't think I am hurting my nephew.. because there is no such material or equipment is being used that would hurt anyone 😊 thank you !
How much time it will take for dry.
Hi, the molding mixture gets hard within 4-5 minutes ,,,and casting needs almost 15-20 hours to get hard