Pentair SUPERFLO® VS (VST) Variable Speed Pump Operating and Programming
Вставка
- Опубліковано 8 лют 2017
- The Pentair SuperFlo VS Variable Speed pump is very easy to program and set up. Pentair has gone to great lengths to make this pump as user friendly as possible. The programming that I show is based on the pump not being connected to an automated system like the IntelliTouch or EasyTouch, for that set-up you will need an External Control Wiring Kit.
I think most consumers will be using this pump as a stand alone and the video will cover the programming of the pump. The Control panel as been simplified for easy set-up so the first thing you will need to do once the power is on to the pump is set the clock. Simply press the “Display” button for 3 seconds and then use the “+” or “-” to set the clock to a 12 hour or 24 hour time format. Then hit the
“+” or “-” to scroll the time up and down. Hit “Display” again to lock in the time you set.
The pump comes with a pre-set default programmed run time:
SPEED 1 runs for 2 hours at 3000 RPM
SPEED 2 runs for 10 hours at 1400 RPM
SPEED 3 runs for 2 hours at 2200 RPM
You can just use the default run time or simply program one of your own. One thing to note and it is important: the pump will not run at all unless you hit the “Start, Stop” button. You will see a green LED light once the pump is turned on by hitting the “Start, Stop” button. Just remember that after initial set-up.
Also not that each SPEED button must have a program run time. If you only want to run 2 speeds, simply set one of the three SPEED buttons to 0 RPM. Just use the “-” button until the RPM zeros out on that button. IT doesn't matter if that SPEED has a run duration, at 0 RPM it will not engage.
To enter a Custom Schedule make sure the “Start/Stop” button is not illuminated. Now you can program each button by pressing it once. For example:
Hit SPEED 1 “1” button, the LED will blink - now use the “+” and “-” button to set the RPM. Press the button “1” again and now you can set the start time of SPEED 1. Use the “+” and “-”
Press “1” button again and now you can set the run duration - use the “+” and “-” button to set the run duration.
You would simple repeat this process for SPEED 2, SPEED 3 and the “Quick Clean” button.
The “Quick Clean” button is used as a “Time Out” button found on other Variable Speed pumps. By hitting this button you override any program set time and if the pump is off, it will turn on. You can set the “Quick Clean” button to any speed and duration but I recommend 3450 RPM for 3 hours. This is a good button to press when you add chemicals to your pool or when you want to use your attached spa. The 3450 RPM is the pumps full 1 ½ HP speed.
I also touch on using the FlowVis Flow Meter to set your pumps run time specifically for one cycle of water. Using a flow meter like the FlowVis will allow you to set your pumps run time exactly in
FlowVis® Flow Meter Retrofit Kit Installation Guide: • FlowVis® Flow Meter Re... order to maximize your energy savings. Without a flow meter you are really just guessing when you set your Variable Speed pump. So I highly recommend installing one when you purchase the pump.
Related Videos:
SUPERFLO® VS Variable Speed Pump - Overview & Features: • Pentair SUPERFLO® VS V...
SUPERFLO® VS Variable Speed Pump: Plumbing in the Pump: • How to Install a Penta...
SUPERFLO® VS Variable Speed Pump Wiring and Electrical:
• How to Wire a Pentair ...
FlowVis® Flow Meter - H2flow Review & Overview: • FlowVis® Flow Meter - ...
FlowVis® Flow Meter - Plumbing in the Complete Valve: • FlowVis® Flow Meter - ...
FlowVis Flow Meter to Set Your Pool Pump Run Time: • Using a FlowVis Flow M...
I installed one of these at my house earlier today. Your video made programming a snap, thank you!
Thanks for the great feedback. It is a really good pump. 👍👍
Excellent video which help me to instruct my technician how to set up the RPM and time according to my pool size. He was going to set it up for longer hours that my size pool didn't need. Your video help a lot. Thanks.
This video was extremely helpful!...I just got this pump installed and I didn't know how to program it..this saves alot of money! Thanks
I appreciate your videos I'm just starting a pool route next week it is new to me. I have been spraying Lawns for 15 years and now im moving to pools
Good move. Pool Service is loads of fun ;).
Very helpful. Thanks for creating this content and your other great videos.
Thanks , your videos helped me install my new Pentair VS!
I appreciate your videos I'm just starting a pool route next week it is new to me I burn been spraying Lawns for 15 years and now im moving to pools
thank you for this, just bought this pump for the energy savings and your video made programming a snap.
Thankyou you saved me 3 times now from power outages I really appreciate your video cheers mate!!!👍👍💪
It Has To Be Reprogrammed After Power Outages? The Power Grid In Florida Is Shaky at Best and We Are In The US LIGHTNING ⚡️ Capital Here In Tampa Bay...
Seems Like More To Go Wrong In This Florida Heat 🔥 The Motor Will Still Wear Out, Is It Easily Replaceable/Serviceable With That Mounting and Motor Controller Or... YOUandMeRealty.com
Thank you for putting the pool pump setup instruction. I just wanted you to know that how much I appreciate it.
Again it's been a long time but thank you for the videos
I use this video every year when opening the pool. I leave it on Lee setting all fall and winter the program for late spring and summer fun.
I was about to say the same thing. Please don't delete this video 😂. For the past 5 years this my to go to
Thx for another informative video David. When I need to sharpen my knowledge I turn to your videos 👍
Thanks Bill! 👍
Installed this pump along with the Flowvis. Surprisingly using your settings I'm getting 50 GPM at program 1 and 20 GPM at program 2 with the Skimmer and Kreepy on. With the Main Drain and Skimmer it's much more GPM and 95 GPM in the Quick Clean mode.
The Flowvis really takes the guessing out of how long you should run your pump for a full cycle 👍
Thanks for the update! The FlowVis is essential. Now you will really be saving on your energy bill. 🤑
Thank you. This was very helpful and concise. Pentair should put a link to you video in the user guide :>)
Thank you for video. Very informative, made it easy for me to configure.
Thanks for the video- I was able to reprogram 2 pumps after someone installed them and set the filter to run 24hrs at 3450rpm and the Infloor pump for 16hrs at 3150rpm. I had to work fast as more than 6 mosquitoes were trying to get my legs!
LOL - 😆
Thankyou you saved me a lot of time and frustration!!!👍👍💪
Thank you very much! I do have a pool guy, but he does not come for several days and we are just recovering from hurricane Ian and the power wiped out the programming. It’s all set to go. Thanks to you.!
Stay safe!
Hi David, thanks you have the best instructies video on youtube! Greetings from the Netherlands!
Thanks, just picked up a green clean with this pump👍
Thankyou very much saved me big time on your videos!!!👍👍💪
Thank you so much! It’s surprising that the manual doesn’t explain the programming process very clearly, so your demonstration was super helpful.
Thanks David very helpful.
Good video easy to follow steps and clear. Thank you for the help.
Thanks. I needed something easy to follow. I appreciate it.
Just bought this pump. Thanks for the setup info.
Nice. It is a great pump. 👍
Every time the pool company gets a new cleaner they tell me my Superflow VS pump is broken and I have to show them your video. Thanks!
So my 10 year old AO smith pump went out the other day and I needed a variable speed pump immediately because my pool was very green. I went to pool stores etc and no one could help me for about two weeks, so I went online, purchased the Pentair Superflo vs. The pump arrived two days later from Amazon (free shipping). I installed the new pump with new plumbing and electrical in two days. TOTAL COST of Pump/Plumbing & Electrical was $769. This was a $500 savings. I would not have done it without David's tips on installation. KUDOS TO DAVID!!!
Your very welcome. Thanks for the great feedback! 👍
😅t
hugely helpful thank you
Very very helpful! Thank you so much!
Thank you. Big help.
Made that simple thank you
You the BEST!!!!
Thanks for the video!
Very helpful thank you
Excellent explaining
Thank you so much for your prompt advice!
Great help thank you
Thank you so much
This was every helpful thank you you saved me money and waste of time
Great video, I don't use a pool guy ever since I went to salt. So they would have charged me to come out to reprogram my pool pump. Had a power outage for a few days during a storm and pump lost its memory somehow. So this video is perfect exactly what I needed. Thank you!
I just had this pump installed and am having trouble trying to start it several hours after it ran cycle to heat a built in Jacuzzi. Hos do I start the pump running manually?
Thank you sir
Thanks!
Another Excellent informative video Thanks! Anyone deal with this pump That has harsh winters? wondering how the electronics fair sitting in freezing cold weather for 6 months a year. (winterized of course).
Thank you
Hey man just wanted to thank you for taking the time and putting in the effort to making all these video's for the community! They have been EXTREMELY helpful and very informative! You have taught me a lot! Quick question though! I just got my pool re-plastered! Went with Midnight Blue pebble bottom, do you have any video's on how to/what to do with a fresh water fill? Thanks in advance! +1! Subscribed!
I do have some start up videos. You plaster co. should do that for you.
Acid Start Up for White & Colored
Plaster Pools Step by Step - Part one of two:
ua-cam.com/video/spbT1KZYpcQ/v-deo.html
Acid Start up -How to bringing the pH
and TA up - Part two of two: ua-cam.com/video/CaHMwyNA5-w/v-deo.html
David i have a goldline hayward controller board inside the house for my single stage pool pump as a timer which allows me to turn the pump on and off as needed. i am thinking about changing my pump to this pentair superflo pump but i am confused how would i be able to integrate the control with my existing controller? any advise? ill appreciate it
It would be best to go with a Hayward VS pump so that the communication is flawless. The Superflo VS was primarily designed as a stand alond pump without automation. Even connected to Pentair automation it is limited. The Hayward Super Pump VS 700 230/115V (Expert Line) Item # SP2670020VSP. This VS pump is comparable to the Pentair Superflo VS. It is only sold at retail pool outlets and not online. They come with a 3-year warranty. If your going for the Superflo because your pool equipment is 115V you can also get the straight 115V model: Super Pump VS 700 115V (Expert Line)
Item # SP2670010VSP
Perfect
Your videos are super helpful. I bought a house with the Pentair system. I’m learning how to use it thanks to you.
Question. I understand how to set the system but what changes should I make for the weather. How long should I run the filter and at what speed for 90 degree weather and what speed for 70 degree weather?
I would cut the run time exactly in half from Winter and Summer to make things easy. Glad you found my videos helpful! 👍
Thanks for this. Is there a maximum RPM that should be used during the longest part of the day? I have a small pool (4500gallon), but my heater needs a higher water pressure to run. Wondering what the max is without burning out the motor.
Max is 3450 RPM and it won't damage the motor.
I have programmed my pump but it is not running the program. The start button is on but the display just reads 0. Any thoughts?
I noticed after I turn it back on that it says, "Prime" flashing, and it's a lower speed than what was set.
Hi is there anyway to contact you I have a couple questions about running this pump when weekly shocking my pool
Great Video, I followed your programming advice. However when I turn on the pump the RPM doesn't read what I set it at. Any thoughts on what I'm doing wrong. The pump seems to run fine. I don't see the watt light ever light up in any mode. When you go through the programming part does it automatically delete the previous program that was turning on the pump ect. Thanks in advance.
The best thing you can do is to call Pentair Tech support while you are out there by the pump. That way you can tell them what is on the screen at them moment. It is hard do troubleshoot it if you are not directly at the pump. Expect a long hold time unless you call early AM - 800-831-7133
so cool
i read that to turn the "external control only" light off, i should hold the start/stop button until it turns off.....but ive done this and.....NADA, still lit up, pls help
hi i wrote from indonesia, i just built a swimming pool size: 53ft x 9 x 5 deep = 16'200 gallon.
my size pipe are all 1,5 inch.
here they sell the intelliflo vs or superflo vs.
the filter here are ta60,ta100 or sd80.
i'm little bit confused on which is it the best pump and of course filter i have to buy.
please help me. hope to hear you soon
Great video! Is it possible to program this pump with an app? The Pentair Home app doesn't list the VST as an available pump to add.
I don't think it is compatible at this point.
Hey i have a quick question for a 10000 gallon pool is a 90 sqft good enough it does a great job its a c900 ayward or should i go to overkill and get the hayward c2002 or c 1750
The bigger the filter the better. 200 sq ft is fine.
Thank you very much for the easy-to-follow instructions. I live in So California. Right now the pump is set at Speed 1(3000) for 2 hours, Speed 2 (1650) for 8 hours & zero for Speed 3. Should I make some adjustments in view of the hot weather?
Yes, Increase speed one by 4 hours to run it 6 hrs at 2800 RPM
@@SPL You recommend running it for 14 hours a day in summer in California (100 degree temps)? Just had one installed yesterday.
Thank you for this. Quick question though? If we want the pool to be heated with this pump doesn’t it have to run at 3000 RPM or above?
It doesn't need to but it will take longer to heat on a lower RPM
Do a review on the pentair intelliflo
Great instruction and clear details. What does the "External Control Only" feature do? Does it ignore this schedule you programmed? Can the pump run the schedule and receive an override from an external controller?
It is an option if you have an automated system connected to your pool equipment. The Automated system like a Pentair Easy Touch will override the pump panel and you would run it from the Easy Touch.
Does anyone know what happens if a signal for speed 2 is being sent and another signal is sent for speed 3? Will the most recent signal win or will it give an error code? When signal for speed 3 drops, does it resume speed 2 from the signal which has stayed on?
@@SPL my "ext.control only" is lit up, how do i turn it off ? i cant operate the pump with it on, its seems
Hi Everyone my Pentair Pump is locked into exteririor control only how can I set it back to controling from the display?
How do you backwash the pool when the pump is shut down?
Perfect... solved my problem today..!!! However.. What does ALARM mean on the pump which I saw today and shut off the power to reboot. ???
Just means pump lost prime. Usually air in the pump basket area causes this
Can this be controlled via a smartphone or Alexa?
We have this VS Pump and a Hayward salt chlorine generator for a 20,000 gallon pool any suggestions on run times and settings? Thank you for your videos!
12 hours at 1800 RPM and 8 hours at 2400 RPM. That is equivalent to your standard speed pump running for 2 hours a day in electricity use.
In general, is this your common schedule for most pools? 3 hour morning high run followed by 8 hour slow run? Thanks
8-10 hours on a low speed like 1800 RPM and then 4-5 hours at 2400-2600 RPM. Depending on the pool size. But nothing on high speed at all really.
When you add yellow out and need to run
pump for 24 hours what speed do you recommend and do you simply program one of the speed buttons for the 24 hours? Thx
Yes. Typically at a higher speed like 3100 RPM. No need for the full 3450 RPM. You can program a button to run for 23:59 minutes.
is there anything I need to do to this pump if I drained my pool in preparation for getting a new liner later this season? I had leaks all over my stairs on my vinyl liner from my dogs claws so im going to replace the liner. I drained the pool in the meantime but there is still some water inside the sight glass of the pump and it's starting to turn greenish. Should I have drained that water out before storing for a couple months not in use?
Would say a good dosing of chlorine once filled will cure everything.
David how many gallons is that pool you just set up with those run speeds?
About 17K Gallons
So after using quick clean to vacuum will it default back to options 1 2 or 3 depending on schedule, automatically?
yes
What would be the speed the pump needs to run order to use the heater? I have a RayPack new heater. I understand a certain speed is needed for the heater to work. I haven't used it yet (heater), just had the pump installed a few days ago. Thanks for any advice.
I beleive the lowest RPM for that heater model is 1800 RPM. I prefer to run it at 2800 RMP or even the full 3450 RPM for a short time to heat up the pool or spa.
Thanks for your response. I asked the pool company, they say 28K RPM would be okay. It is raining today in DC, will give it a try by the weekend. But second question would be: what would be the benefit of a variable pump if the heater needs a specific RPM in order to run properly? Thanks again.
Thanks. From your reply I guess that the whole idea of a 'variable pump' looses its meaning, right? I.e. a specific speed is needed for the heater to run.
Thank you so much for this video. It was much needed. I just like to clear something. I like to run my pool for a total of 7 hrs/daily. I programed the 1 cycle for 2hrs at 3000 speed, 2nd cycle for 4hrs at 1400 speed and 3rd cycle for another 1hrs at 2200 speed. This should give me a total of 7hrs right? After I set the clock and programing of all the 3 cycles I turn the START/STOP switch on. On display screen shows Err 0021 and the pump does not start on the programmed time or at all. The quick clean won't start either which is also programmed for 2 hrs. Any suggestions and advice would be greatly appreciated. I have a small pool. Thank you in advance.
Your panel may be loose on the pump. Remove the screws on top and check to see if the 5-pin connector is all the way in. Do this with the breaker off to prevent getting shocked.
@@SPL I tried that and it started working. Thank you so much.
Hi any advice on retrofitting a single speed pump to a VS pump I believe century sells just the VS
Yes, those are great.
Does this pump control panel have a battery backup? I would hate to reprogram it every time there is a power blip.
Yes, for up to 24 hours.
Your Vedic is very helpful! The screen recently doesn’t show, that makes me unable to adjust it and program it! Any tips?
Check the wire inside to see if it has come loose. Easy to do. Just unscrew the screen and you will see the wires under it.
@@SPL thank you so much for your quick reply! I’ll try this and hope it works.
Great Video , Thank you ,
How can we rest the programing ?
hold 1-2-3-Quickclean down for 3 seconds all at the same time to factory reset.
So I have a MX6 zodiac auto vac, so when I run the pump at lower speeds the vac doesn’t seem to work. How long should I use my mx6 in the pool and at what RPM?
At low speeds it will not move much at all. I think 2400 RPM will get it moving pretty well and I would run it for 3-4 hours each day at that speed or higher if needed.
Will this pump work with a pool and spa combo. I have a 10,000 gallon pool with spa attached. I have a 2hp pump now. Will it operate the spa with 6 jets? and how do you program it for spur of the moment heating up the spa and using with jets.
Yes, it will work fine. If you don't have an automated system, you would simply push the Quick Clean Button, turn the valves to spa mode and start your heater. You would set the Quick Clean Button at 3450 RPM and for a run duration of 2 hours. Very easy.
So... After in install and program it, I assume I turn on the intermatic timer and remove the Off trippers... right?
Yes. Correct.
We just had an older Hayward replaced with this pump. Pump sits about 6 feet higher than pool water level (it's up in a retaining wall bed) -- it seems like the preset speed 2 isn't high enough and causes it to lose prime. Is there a magic number the speed needs to be programmed to or just trial and error? And is there a way to completely override the schedule and have it run on one speed until changed? I need the heat pump to run pretty continuously to get the pool temp up enough to swim in it...
You have to tinker with the run speeds. There is no always on mode but you can program a 23:59 program by just setting the run time to start a 2:00 pm and turn off for 1 minute at 1:59 pm.
@@SPL if the pump shuts off by itself at all I lose prime -- because the pump is higher than pool water level, the water drains back down and I have to refill the hair trap with water to get it primed again. It can't seem to self prime because of this. If I manually turn the motor off I close the suction from the skimmers/drain at the same time -- and only then can I just start the motor back up without adding water. I reprogrammed the speeds and times and just now realized it all went back to the factory presets.
Thank you!! What speeds and time durations should I run my 24 hour Pentair variable speed pump? (18000 gallon fiberglass pool)
1800 RPM for 12 hours. 2400 RPM for 6-8 hours.
@@SPL thank you! Should I set the quick clean button too? If so, what speed and duration?
question-after pool company installed Superflo VST on 6/13/22 we had reverse flow when we would clean the filter basket of the new pump. Tech added closing multiport (which we have never had to touch for 14 years unless backwashing) we set pump for 12 hours at 3k. Sunday 6/26/22 (13. days after installation of new pump) our system exploded. Pool co claims no responsibility. Others think foul play-we know because of security cameras-there was no foul play. All our valves were opened. Any thoughts on the reverse flow causing a build up in pressure enough to explode pipes? I hav tons of pictures and video-tomorrow the system will be taken apart and pipes will be replaced to try to uncover the mystery.
Maybe the inlet and outlet were plumbed wrong. That is all I can think of.
I set the time and adjustments I wanted. It didn't start at 10am as I programmed by itself. Do I must hit start at 10am every morning for it to run on my settings
?
No. If the pump is on and you hit start after programming it should run at that time. Check the AM/PM as I have set it wrong myself.
I live in north bay of San Francisco. I want to maximize the lower electricity rates during the overnight hours. Is it ok to have highest rpm’s running overnight, then lower rpm’s during the day? Just wondering if higher rpm’s need to be during hotter sunny part of the daytime? Thanks
That should work on fine. At 1800 RPM during the day that will be enough to keep the water moving.
Thanks for your video! Do these settings work for an 18,000 gallon salt system pool in Northern California? I actually kept 2 hrs at 2200 rpm so I’m running 2 hrs @ 3000, 8 hrs @ 1400, and 2 hrs @ 2200 rpm.
I would try 12 hours at 1800 RPM and then 8 hours at 2400 RPM. Easy and effective.
@@SPL thanks!
like watching your vids they have help me out!
but I need your help.. I have this customer with a star rite super max.. The problem he is having is that all led lights are on (solid) but nothing showings on the screen. And it wont turn on. First time I see this.. can you help
Maybe screen is dead. Pretty expensive part.
thank you
I have Lights and screen works as well, But It will not turn on at all,..It was working flawless at bed time last night
This video is great! I have a 12k gallon pool. I live in AZ, for the heat should I be running 12 hours per day or is that overkill? Also is speed 1: 3000rpm for 3 hours then speed 2: 2000rpm for 6 hours then speed 3: 1400rpm for 3 hours ok?
I would set it to run for 12 hours at 1800 RPM (165 watts per hour) and then 4 hours at 2400 RPM as long as you don't have a cleaner. This will give you maximum energy savings. If you have a cleaner set it for 2600 RPM for 3 hours. This is roughly equivalent energy wise as 2 hours of run time on a 1.5 hp standard speed pump. So you can imagine the energy savings.
@@SPL Thank you. I forgot to mention I'm on a utility package. I save by not running during 3pm to 6pm Monday-Friday. What would you suggest in that case?
I have a rebel vaccum as well and the pool is probably actually closer to 10k gallons. I just bought this house so I'm learning lol.
I have the same system that you are programming. Is there a way for the pump to stay off a certain amount of hours during the day? And how do I program the pump for a 30000 gallon pool. Like how should i run it.
For that size pool the builder should have put a 3 hp Inteliflo VS on it. Would run this at 3100 RPM for 14 hours and then 2100 RPM for 7 hours.
I am thinking of upgrading to this pump. If I install this will I lose the function of programming my pump from my garage with my jandy controller?
It will work with the Jandy Aqualink Panel
Would You Recommend This Pump To Replace A 15 Year Old PAC-FAB Challenger? Is It A Drop In Replacement? Is It Ok For A Pool With 1.5 Inch Plumbing? The Pool Is 13k Gallons
Will be good. Not exactly drop in plumbing but if you need to create a higher or lower angle just put to 45 degree fittings together and it creates a nice "S" curve that can be moved around.
Hi, Newbie with this IG equipment. Stupid question...
The PB installed a manual clock/timer and also has a switch.
When the time comes on it turns Pump and SWG(Autopilot).
Now let's says if I take off the
on/off levers in the clock and set this VS pump on is own settings Would this pump turn on the SWG?
Thanks in advance
In this case the SWG would stay on but not activate of course. So the pump as you described things would turn it on once the system registered flow on the flow meter.
@@SPL i will give that a try. Thanks
Any concerns running the pump at night? Trying to be energy efficient We are on time of use so 8pm is optimal.
No issues with running this pump at night.
I service the Pool at the Days Inn Motel,..It has been running flawless for about a week also just installed about a week ago,..This morning it isnt working at all,..I have lights but it will not turn on at all,..I tried the hard reset by holding the 1,2,3, and Clean at the same time for 4 seconds and still nothing,..Please Help we closed pool until fixed
Any error codes?
Can you recommend how to set it up with an aqua logic automated system?
They won't communicate in that case - maybe the 2021-2022 version but the older ones won't
On this pump is there a way to change the pumps prime speed and amount of time? I don't see how? Thanks.
Yes, the menu on the lid will instruct you. very easy.