Restoration of an Old Railway Lantern. Beavers that Gnaw Iron.
Вставка
- Опубліковано 15 вер 2024
- I was surprised that after so many years all the original parts were preserved in this lantern!
I found this flashlight at an internet flea market. The seller asked for 20 bucks for the lantern, bought without bargaining and with great pleasure.
I'll tell you a secret, at the flea market there were lanterns in almost new condition and at a lower price. It seems to me that the sellers of old things are aware that there is a certain group of people who want rusty things, and therefore, from two identical lots, the one with more rust will be more expensive!!!!
Recovery process:
The first thing I did was fill it all up with WD-40. Some nuts had to be heated with a soldering iron, but this did not help either - here the Dremel cutting wheel came into play.
Having completely disassembled the lantern, I sandblasted it. As it turned out later, a fairly large part of the body consisted of rust, and when the metal was cleaned of rust, the body became like a sieve, and the upper edge seemed to have been gnawed by mice or beavers))).
I have long wanted to try a special plasticine for metal, the so-called "cold welding". The instructions say that they can close up holes in metal, as well as make lost or missing parts.
I tensed up quite a lot remembering the developmental plasticine modeling classes that I attended in kindergarten. After spending a couple of hours on the theoretical part, then I fashioned the corroded upper part of the case, and filled up the through holes.
After a couple of hours, the plasticine hardened and was quite well processed.
Smaller irregularities I puttied and then all grouted and painted.
I want to write a few words about batteries. I was surprised by their vitality! They are over 30 years old, and I only had to fill them with electrolyte and recharge a little, as they came to life again, AMAZING QUALITY.
Overall, I enjoyed working on this lantern, although it took me longer and was behind my posting schedule. Therefore, a big request to you, click "thumbs up" under this video, and write me a small comment (for example, what do you think about this project, or what are the shortcomings in the work). This will help me a lot!!! Thank you.
Take care of yourself!
Best regards Max!.
#restoration
#awesomerestoration
#asmr
Frankly, I was surprised the batteries came back to life.A nice restoration, blue notwithstanding...
Blue in combination with the color "ivory" I really liked.
Wow!! You have amazing skills and patience!! Well done!! Absolutely incredible restoration!
Thanks for appreciating my work!
Better and much more beautiful than new!! Good job
Thanks for support. Good luck with your channel!
This was the best so far , watching this l said , hope he can find new batteries... then you restored the old ones ... respect.
Thank you! I hoped to the last that these batteries would turn out to be working. Otherwise, I would have to install modern analogues (by the way, I already ordered them in the online store)))
Another beautiful resto, well done you
Thanks for support! I have a couple of very interesting old lanterns in stock. I think that in two or three videos I'll take care of them)
Помню такие фонари, у проводников вагонов, железных дорог. 🚂🚃
I love such items. Bravo, well done 👏🏻😍
Thank you! I think that soon I will post a video with the restoration of the old emergency lamp for the car.
Молодчина мастер. С душой восстановил фонарь! Красота вышла. Спасибо большое за труд.🔦🛠️📹👍🔥
Спасибо за тёплые слова!!!!
Fantastic work. I never tought this could work, but it looks amazing.
Nice job. You made it both look good AND work. Been a long time since I worked with NiCad cells like those. I used to use such NiCad cells when flying RC airplanes for the glow plug start up. Amazing amount of current from them. Thumbs Up
Thank you!
RC planes are awesome!
On those switches it should come with two nuts, one to put on the outside and one to put on the inside. Then you can put the switch so you don’t have any exposed threads sticking out like that. You can also get rubber covers for the outside so it’s more water resistant.
That was a very bad light! You did a fine job of bringing it back to life.
2:05 wee beastie crawling away in the LH corner there because it's habitat is being torn apart lol.
🤣🤣🤣
you did a really great job! i am also surprised for the batteries... they just work!(i bet they hold less than 1h whit thouse light bulps) yet, go find 30 years li-ions that works at all :)
Thank you! To be honest, there has not yet been time to do a full test of these batteries. Yesterday I finished filming the video and immediately posted it. Haven't been to the workshop yet.
Awesome your work sir 👌👌👌👌👌👌 from INDIA
Wow that was in a state in the beginning but it looks almost brand new now . Great work
Thank you! I think that this lamp will still work)))
Забыли показать, как меняются линзы и заряд аккума после восстановления! Очень удачное сочетание цветов, и очень недурный результат. Жду нового ролика!
При монтаже видео удалил многое, ролик затянутым получался.
Спасибо за вашу оценку, у многих синий цвет вызвал вопросы)))
Personalmente avrei scelto una tinta diversa ma il lavoro di restauro è stato veramente ottimo
Grazie. Mi è piaciuta la combinazione di blu e avorio.
О, я точно такой же делал, и год выпуска такой же и состояние было почти такое же, но мой все таки не прогнил до дыр. Цветовое решение спорное, но все равно молодец
Я долго фантазировал на тему цветовых вариантов))) и вот что получилось)) Мне нравится)!!!
Very cool object.👍
Well done!
👍👍👍
Класс. На 2.05-2.10минуте - это житель фонаря слева побежал? 🤣🤣🤣
Да!!! И я выяснил кто это! Это насекомое - златоглазка. 😁
BOM TRABALHO
Boa noite amigo, gosto muito dos trabalhos de restauração que você faz. Restaurar é dar vida o que estava quase perdido. Achei linda essa pulseira que está no ser braço direito é que sou artesã de crochê e as vezes também bordo os meus trabalhos. Sou do Brasil e mas uma vez parabéns.
Obrigado por apreciar minha pulseira))
@@ITBR_Restoration Ого , ты ещё и по-португальски бельмесишь ! 😁👍
@@pavelmeridian 😂😂😂 с Гугл переводчиком я и по китайски иногда разговариваю 😂
Although I liked the restoration, I feel you could've done a bit more work on the switches. For example, make a special bracket, so that the nut isn't needed on the outside. Maybe also make a switch cover in the shape of the old one, that can slip over the metal switch lever on the outside.
i like the video and you’re work, but not the blue …. 🙃
What's wrong with blue???😁
@@ITBR_Restoration basically, i think blue is ok .
maybe it doesn’t fit this lamp !?
but hey, the rest is amazing !
Загляденье:)))) только светофильтры в темноте не показал))
Ага, повырезал на этапе монтажа видео)))
Аааа, я ждал изменения цветов 💐 💐
Green latern must of used it this latern
😁😁😁👍
@@ITBR_Restoration are you gonna do green latern lamp project next lol
Мастерррр! Красава!!!
🙏🙏🙏
Вдохнули жизнь в прошлое .
Скажите, какой процент електролита и дистиллированной воды в акамуляторах.
Я переделал такой фонарь под аккумулятор от мопеда, и светодиод вместо лампочки, а два еще лежат все руки не доходят, все три в металоломе нашел.
Next time there is such bad rust, use the old parts as patterns, make new parts.
My skills are not yet enough to make new parts)))
@@ITBR_Restoration, you'll get there.
A small bead-roller could be helpfull for things like this.
Получилось круто у меня такой же есть ж д фонарь переключатели оригинальные можно в авто магазине купить для АвтоВАЗа или на авто рынке
Спасибо за совет.!!
До конца ждал цветных стеклышек 💔
О каких стеклышках вы говорите?
@@ITBR_Restoration Вот же) ua-cam.com/video/Jxe299kZmDM/v-deo.html
@@penetratorio3223 😂😂😂
Я вас просто не понял сначала )))
Какой знакомый фонарик. Я из такого списаного фонарика сделал корпус для паяльного трансформатора.
👍👍👍
Ооогонь 🔥🔥🔥
🙏🏻🙏🏻🙏🏻
Взял такой-же аккумулятор, от такого же фонаря и попробовал, таким способом оживить не хрена не рабочий способ,что то я сомневаюсь, что и у тебя не получилось😊
На вид ему не менее полусотни лет,50-60 годы.?
Думаю что то около того.
Честно говоря решение с покраской отражателей так себе. Эконом-вариант.
Ну , не у каждого есть возможность хромирования .
@@pavelmeridian хромирование химией без применения электролиза уже давно довольно бюджетный вариант.
Химическая металлизация называется. Кому интересно - искать на канале Машинаторы
Спасибо, изучу 👍
@@ITBR_Restoration надеемся увидеть в следующем ролике. Там всего пару химикатов надо прикупить.
Почитал описание 🤣 Я в детстве (7-8 лет мне было) родительский бабинник магнитофон Daina разобрал 🤦🏻♂️ , а вот собрать как и у тебя не получилось 🤣🤣🤣 В общем тоже был стресс с родителями 😁 Кстати , а почему описание канала на немецком ? Страна - Россия а описание на немецком ... Или это автоматически , в зависимости от того где абонент (то есть я) проживает , Ютуб делает ?
Я уверен что раньше каждому пацану доставалось от родителей по этому поводу 😂
На счёт языка в описании вы полностью правы!
@@ITBR_Restoration 😁👍
👍👍👍👍👍👍👍👍
Эти тумблеры фонят радиацией 😢
Они совершенно безопасны, если не выбить стекло и не употребить внутрь толченую светомассу. Там альфа-излучение, которое листом бумаги задерживается. Но таки да, я тоже пугаю одного знакомого таким тумблером, мой дозиметр пищит в панике от тумблера, а знакомый- от дозиметра.
😁😁😁👍
Эм... А можно поинтересоваться, где Вы тут углядели переключатели с радиевой светомассой постоянного свечения? Как бы они попали на железнодорожный фонарь и для чего? Более того - правый (который на малую лампочку) переключатель, похоже, вообще люминофора не имел с самого начала.
Это не старинный фонарь, а штамповка 80х годов. Борохло.
Даже если и 80-е, это разве недостаточно старый фонарь?
well you can say that this lantern was holie. lol
✌✌✌✌✌✌
𝖕𝖗𝖔𝖒𝖔𝖘𝖒