DIY automatic indoor plants watering system
Вставка
- Опубліковано 16 вер 2024
- First of hopefully many DIY Arduino projects on my channel. In today's project, I will show you how to build automatic watering system. Although the project is based on Arduino Nano there is no problem to build it with Arduino UNO. Arduino Nano and Uno have compatible pins.
Wish you successful project!
Parts List:
Arduino Nano v3.0 www.ebay.com/i...
SoilWatch 10 - soil moisture sensor pino-tech.eu/sw10
1602 LCD with I2C interface www.ebay.com/i...
12V Peristaltic pump www.ebay.com/i...
1/8inch or 3mm internal diameter PVC tubing www.ebay.com/i...
1/8inch or 3mm connector www.ebay.com/i...
IRLZ44N Transistor
breadboard - optional
7x9cm perfboard
2x100nF ceramic capacitor
1x100uF electrolytic capacitor
3x100k ohm resistor
DC Socket 5.5mm/2.1mm www.ebay.com/i...
2x tact switches www.ebay.com/i...
female/female jump wires
straight pin headers
some wires
Terminal Block Screw Connector 2-way
Terminal Block Screw Connector 3-way
9V power supply - at least 1A
box 100x80x40mm cotton buds/swabs - check locally first. this may work but I can't guarantee www.ebay.com/i...
#soilwatch10 #diyproject #automation