Bestarc Plasma Cutter: INSANE! Machine Has More Features Than An Expensive One

My Quick review of my new Bestarc plasma cutter that cost under $250 and also how you assemble a new plasma cutter although this bestarc plasma cutter is already pre assembled., I will be showing you the steps for a cheap Amazon plasma cutter setup and you’ll see that it’s quite different compared to the other plasma cutters I have bought and assembled before.
This Bestarc plasma cutter has a lot to offer because every adjustment you need can be done right on its front panel. For example, you can set up the following right there on the front: Air pressure (Psi), Post time, amps, and voltage selection.
Some cheap Amazon plasma cutters with regards to Psi are done at the back of the machine because this is where you have to install the compressed air regulator, this Bestarc plasma cutter has the air setup knob on its front panel.
Yet, its air regulator is already preinstalled at the back and is encased to protect it from unnecessary bumps. You will also notice that this regulator is slim to match the slim body of the machine. Therefore, this plasma cutter under $250 is more compact than the rest of the other units I have.
The other unit I have shown in this video is the FLAMEWELD CUT50DP, a 50-amp pilot arc plasma cutter that is also a powerful and very efficient machine. If you want to check my review of this unit, you can click this link: amzn.to/3esfdKz
Now, going back to the Bestarc BTC500DP review, this is also a 50-amp pilot arc plasma cutter but with a more modern twist. As I’ve said, it is loaded with the necessary features like the Psi, amp, voltage, and Post-time selection right at its front panel while its size has become slimmer and making it more portable but still solid.
It also comes with the necessary accessories like the AG60P plasma cutter torch (with 4 meter-long cable), some consumables, an airline, an earth clamp, a voltage adaptor for 110/220 volts, and a User’s manual in English with troubleshooting tips.
Since this unit’s air regulator is already preinstalled at the back, all I can do now is just connect the cables to their slots and then I can cut right away. And that’s how to simply assemble a new plasma cutter pretty fast.
If you would like to see where I’ve found this bestarc plasma cutter, check it out at Amazon .
My Amazon Links Here For All 3 Machines
If machine is out of stock checkout this machine
Flame Weld 50 amp Plasma Cutter Review : • Pilot ARC Plasma Cutte...
Flameweld 50 Amp Machine : amzn.to/3D7MSCR
Bestaec Machine : amzn.to/3Vzw270
PLC 55 pro Machine : amzn.to/3CLfL6g
PLC 55P Pro Pilot Arc Plasma Cutter (CNC capable) Review : • Under $300 Plasma Cutt...

[@paulh71]

When you say under $250 are you talking US or NZ dollars? Currently seem to be $387 + $95 postage in AUD. Or have Amazon put their prices up after your review?

[@petestools]

$ USD Most of my viewers are based in the states

[@FoxMan777]

I just got one of these myself. Tried it out on 110v at 15 Amps and 65 psi just to make sure it fires. I have yet to get my 220v going which I plan to use it on.
It sputters at that lowest setting of AMPS but if I go higher I'll pop the breaker.
Someone suggested that I turn down the PSI to 40 PSI for such low amperage to get a consistent pilot arc flame that doesn't pulse... Says the PSI is too high and blowing out the arc at that low amperage.
Since I am new to Plasma Cutters I am curious if that suggestion makes sense. I'd hate to get past 30 days only to find out my unit is bad.
Really have to get my 220v done and usable before then. :)

[@FoxMan777]

Well, with all the numerous wonderful responses I thought I'd update that it indeed was too high of air pressure. :) Trying the 20 amp setting also fixed it.

[@petestools]

GREAT

[@brentsmith5647]

♥️👁️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@petestools]

oh

[@pondacres]

What's up Pete. I got this machine as well, and it does quite well on 240v. On 120v though, omg it sux bigtime...the thing just spits/sputters on 120v.

[@petestools]

yea agree i think most machines don't like 120v

[@BeauGeste49]

Good day Pete, I enjoyed the video of this plasma cutter. I've had this in my shopping cart for the past couple weeks and hope to get it soon. Looks like it works well and look forward to see you put it through it's paces!

[@petestools]

Hi Neil ,Yea this is the best one soo far cheers Pete

[@frigginpos]

Is there a law that says the power switch MUST BE on the back of the machine? If you have these mounted on a shelf of any height, it a pain in the ass to get to.

[@petestools]

Don't think so i have plasma cutter with switch on front

[@ianrobinson5446]

Pete how many litres tank on air compressor is good for plasma cutter.

[@petestools]

Hi Ian THE BIGGER THE BETTER when plasma cutting my friend .

[@richgcoop1842]

I have one just like it. I like it.

[@petestools]

COOL

[@smca7271]

great vid

[@petestools]

TA

[@matthewbalchin4772]

Can you use in the air pipeline argon gas

[@petestools]

No I wouldn't

[@ItsaboutMakingnotBuying]

Why would you use argon gas?

[@matthewbalchin4772]

welder photos I haven't got you email address to show you the photos

[@petestools]

[e-mail]