Hii I have sonata 2011 it look like same subframe.. just wanna do I need to support engjne or transaxle or not.. I m not sure the long two bolts that u opened at (1.57- 2.01 time frame) front are attached with engine or not.. please guide this is only video that is exactly I m looking for
Hi ! No theese bolts are not connected to the engine, only to the framerails. You'll not need any additional bars for engine, just hydraulic jacks you saw in video.
Hello this is just excellent video I opened the subframe from scrap yard but needs to change bushing what is part number for Hyundai sonata 2011 2.4 litre engine size.. please help me
Hello, thanks for watching! I'm not really sure what your car is. Is it Sonata NF or YF. You can drop me a photo on email pestun.igor@mail.ru Also, you can check the bushing itself, partnumber can be written on rubber. If you won't be able to find, send me a photo.
Hi! I'm not sure what name does it have, but it's used as an additional reinforcement for subframe and also it's a plate for the bolt, that holds rear busing.
Niby wszystko poprawnie, ale sanki jak były zdjęte zardzewiałe, tak wróciły na auto dalej zardzewiałe. Druga sprawa po czemu majster nie używał klucza dynamometrycznego? Te śruby zawieszenia powinny być dokręcane z odpowiednim momentem, a tu wszystko dokręcane pneumatykiem i uj, byle na sztukę, bo następny klient już czeka...
@@igorpestun8703 thanks for responding, would you happened to know why my kia Sedona makes cracking noises while driving but even more while going over speed bumps or uneven ground. Everything seems pretty tight.
@@fergap9438 So many different issues can be described by such kind of nioses. It can be inner CV joints, which receive constant load on straight road and extra loads on uneven road. Can be shock absorbers struts loose. Of something simple like sway bar links. Difficult to say without seeing the car.
Very ilustrative. Thank you for sharing!! 👍
Perfect. Thank you for showing this.
Excellent!!
thank you very much
Thanks for the video very informative.
I have a kia ceed 2010 wagen can someone know the part numbers for those bushings
Hii I have sonata 2011 it look like same subframe.. just wanna do I need to support engjne or transaxle or not.. I m not sure the long two bolts that u opened at (1.57- 2.01 time frame) front are attached with engine or not.. please guide this is only video that is exactly I m looking for
Hi ! No theese bolts are not connected to the engine, only to the framerails. You'll not need any additional bars for engine, just hydraulic jacks you saw in video.
Hello this is just excellent video
I opened the subframe from scrap yard but needs to change bushing what is part number for Hyundai sonata 2011 2.4 litre engine size.. please help me
Hello, thanks for watching! I'm not really sure what your car is. Is it Sonata NF or YF. You can drop me a photo on email pestun.igor@mail.ru Also, you can check the bushing itself, partnumber can be written on rubber. If you won't be able to find, send me a photo.
what size socket for the largest bolts did you use. the four bolts in the corne
Don't remember clear, 21 or 19
Is it save to use grease on bolts as you do and what type of grease can be used
Yes, it is safe. I use regular grease for bearings.
Very nice do you know the part number for the bushing presser kit by any chance ?
Thanks. Tool kit number and brand is JTC-4091
@@igorpestun8703 thank you
what made you to change them? did the customer complaint of a noise, like a clunk?
A thudding noise under the car's bottom, and car was swinging a little while changing the lane.
Подскажите пожалуйста!После замены подрамника делается сход развал?
Да, обязательно.
Hi ! Please ,
what is the name of the part in 1:17 with that 3 screws ?
Hi! I'm not sure what name does it have, but it's used as an additional reinforcement for subframe and also it's a plate for the bolt, that holds rear busing.
@@igorpestun8703 nobody doesn’t know how it call😀 I ‘m looking for it for my car , but I cannot find it… Do you know number of the part ?
@@michalbrtan4725 Try to check this part number 62477-2h000
@@michalbrtan4725 According to manufacturer's manual it's called "STAY"
@@igorpestun8703 Thank you very very much! You helped me a lot , I found it ! Finally…
Please, what kind of save is there, some save code, thanks
Sorry, what do you mean by save code? I don't understand.
@@igorpestun8703 Sorry, I'm writing through a translator, I meant the silentblok storage tip, I want to order it and I don't know the code
@@michalkubov4589 62485-2h000
@@igorpestun8703 Thank you 👌😉
Can the frame be removed without supporting the engine & gearbox?
Yes, on this car you can do it.
@@igorpestun8703 Thx
Niby wszystko poprawnie, ale sanki jak były zdjęte zardzewiałe, tak wróciły na auto dalej zardzewiałe. Druga sprawa po czemu majster nie używał klucza dynamometrycznego? Te śruby zawieszenia powinny być dokręcane z odpowiednim momentem, a tu wszystko dokręcane pneumatykiem i uj, byle na sztukę, bo następny klient już czeka...
What were the symptoms?
A thudding noise under the car's bottom, and car was swinging a little while changing the lane.
@@igorpestun8703 thanks for responding, would you happened to know why my kia Sedona makes cracking noises while driving but even more while going over speed bumps or uneven ground. Everything seems pretty tight.
@@fergap9438 So many different issues can be described by such kind of nioses. It can be inner CV joints, which receive constant load on straight road and extra loads on uneven road. Can be shock absorbers struts loose. Of something simple like sway bar links. Difficult to say without seeing the car.
Hi ! I have 2009 Hyundai Elantra
Front crossmember was cracked and rusty
To replace it need engine support bar ?
Hello! Engine and gearbox have two mounts on framerails and two on subframe. So no you dont't need support bar.
@@igorpestun8703 so without it engine won’t be dropped ? I was worried about. It thanks for information !!
@@JaeminLee-jc3yg No it won't drop, just like in this video
never understood why they made the subframe so bulky on this car
Балка уже не родная стоит , на родной балке нет сайлентблоков
Скорее всего с элантры балка.
@@user-xl3ur3cs8n именно
Я по прошествии 13 лет заменил подрамник на новый. Московские реагенты прогрызли в нём дыры толщиной в ладонь