This is a great video if you need to replace your lens. I didn't bother pulling out the logic board, I just broke the glass out as in the video, cleaned the hole out with a 6mm drill bit, then bored it out with larger drill bits in 0.5 mm increments until the replacement lens/ring dropped in snugly (7.5 mm in my case), a blast of canned air to make sure it was clear of debris, a thin dab of epoxy around the hole and dropped the lens in, worked perfectly!
I followed your instructions and changed the camera and the lens cover. If you're careful, you don't need to remove the logic board and also glue is totally unnecessary. Anyway, many thanks!
im about to fix mine so theres no need to remove the logic board right? so i was worry about looking for cheap glue! do yo recomend me to do it with out glue?
Hi Everyone! Does someone know how to pull out the glass without breaking it? I have a non working iPhone 7 with a non cracked glass and a working iPhone 7 with no glass and want to make a lil exchange. Before you start, in my country it's not as easy to get a replacement glass as you might think. Thanks!
you don't have to remove the logic board to replace the camera glass...and that thing you just broke and you've got no use for it actually holds the camera in position...
De Iphone is echt mijn favoriete telefoon, het is heel gemakkelijk te typen en je kunt er hele mooie foto's mee maken. Ik heb de mijne gekocht op Ebay, omdat de kwaliteit ook erg goed is bij de dealers! goo.gl/E753e3
This is a great video if you need to replace your lens. I didn't bother pulling out the logic board, I just broke the glass out as in the video, cleaned the hole out with a 6mm drill bit, then bored it out with larger drill bits in 0.5 mm increments until the replacement lens/ring dropped in snugly (7.5 mm in my case), a blast of canned air to make sure it was clear of debris, a thin dab of epoxy around the hole and dropped the lens in, worked perfectly!
Do i have to open the phone to change the ring holder?
I followed your instructions and changed the camera and the lens cover. If you're careful, you don't need to remove the logic board and also glue is totally unnecessary. Anyway, many thanks!
im about to fix mine so theres no need to remove the logic board right? so i was worry about looking for cheap glue! do yo recomend me to do it with out glue?
This video is hilarious... Sadly people like this are fixing people's phones. Gives the rest of us a bad name.
my way for this is change the glass without open the phone
thanks for share
Hi Everyone! Does someone know how to pull out the glass without breaking it? I have a non working iPhone 7 with a non cracked glass and a working iPhone 7 with no glass and want to make a lil exchange.
Before you start, in my country it's not as easy to get a replacement glass as you might think.
Thanks!
you don't have to remove the logic board to replace the camera glass...and that thing you just broke and you've got no use for it actually holds the camera in position...
so many unnesserary stuff done...
IMO it would've been better to just buy a whole OEM shell and then reassemble from there...
Sir where can i buy the mirrror??im from malaysia
o17aspa glass la bangang..mirror tu cermin tilik..haha
it is too difficult
De Iphone is echt mijn favoriete telefoon, het is heel gemakkelijk te typen en je kunt er hele mooie foto's mee maken. Ik heb de mijne gekocht op Ebay, omdat de kwaliteit ook erg goed is bij de dealers! goo.gl/E753e3