Harbor Freight wheels for riding mowers and yard carts flange bearings
Вставка
- Опубліковано 29 бер 2019
- How you can use smaller cheaper wheels from Harbor Freight on your yard cart or lawnmower that have 3/4 inch shaft by replacing the bearings.
- Навчання та стиль
i was actually able to knock the old bearings off the old tire/wheel...and they fit perfectly into the new wheel. new bearings knock out easy with socket extension & hammer. Your video helped me realize to do that so TYVM!
Remove tire from old rim. Use a torch and heat up the outside of rim along bearing. Run cool water inside rim to keep bearing cool. Use pipe diameter litter smaller than opening, place 2"x4" on top of pipe and hit wood with hammer the bearing will be easier to knock out. On new rim, drill holes for grease fitting
Put out that joint, dude!
Question, where did you go to get the other bearings that are bigger sized? Your audio gets cut off when you mention it
Thank you sooo much !
Keep your hand still!!
Just get the plastic bushing ones for 2 reasons, a) When they wear they will NOT wear out the shaft they are on b) Many of those ball bearing ones you get they DON'T have grease in them and fail quickly & in the process of failure they can mess up the shaft
What are plastic bushings?
I got those too but when they are sitting outside most of the time 100% of the time the water get into them and rust them out from the inside because u cant get grease in there.
Had the exact same experience. Waiting on a 10 pack of bearings from Amazon for about 22 bucks.
Didn’t want to spend 100 bucks or so on tires and tubes and put them on old hubs instead of spending around 30 for 2 harbor freight mounted 13 5.0 6 wheels and tires
These wheels are junk, they will break, they arent welded on both sides.
That's ok. They go with the video. The video is junk too