Thank you. I just wish I had the money and time to get it back on the road. About a year ago I damaged the clutch and I haven't had the time or money to replace it.
I have a full build 2.0 long rod on Link G4+ on HKS cams 274/278 running HKS 7460 turbo and while mapping my car sounds just the same but the mapper said it would be a lot better the way he mapped it as in smooth down low, we mapped it on Race fuel and it makes a big difference the way the car sounded.
Thanks dude. What do you want to know? So far it's still a stock block, stock head, upgraded springs and retainers, GSC stage 2 272 cams, HTA GT3586 turbo, 3" exhaust, 880cc injectors, and a whole lot of other goodies :D
@octavioveliz thanku so much for help !!! yeah it is just for weekends and my turbo is 62/65 . but i m very confused becoz i want to upgrade the engine .. i dont know what kind of pistons i shound use and what kind of Valve i should use and what other things i should upgrade for get more hp ?????
I ended up doing what you told me and got the gsc s2 cams, gsc beehive valve springs, arp headstuds, walbro 255lph fuel pump, and a tial q 50mm bov for my evo ix, also the aem digital boost gauge. Should be interesting. Car gets dropped off on Wednesday for the install of everything and tune.
@vhuntermani11 It depends on what you're going for, like how do you drive your car? Is it a daily? If it is I'd go with GSC S1s. Or is it a weekend racer? Do you have a 35r turbo or similar size? If you do then I'd go with the S2s. And if it's just a drag car and you don't drive it to anything else, than you'd go with S3s, because a huge turbo would need them. It all depends, hope this helped.
@stryfetew Yea I just looked on the GSC website it says 274/274 but when I look at say Map Performance or English Racing website it says it's a 274/272 so I don't know what's going on. Hell the AMS website states 278/274
It really isn't the exhaust because it didn't sound like that when it was just the exhaust installed. The sound changed to that after I installed my turbo kit and cams. But it's an Invidia 3" turbo back stainless steel exhaust to answer your question.
@vhuntermani11 well if you only have race tracks in your country then I'm assuming it's a road course right? a 6265 is laggy as hell for a road course. S3's are made for big turbos that are drag cars. My set up for my evo ( I track to) Is going to be GSC S2, BBK-B or a FP Red.
@octavioveliz Hey, im about to get new cams for my evo ix mr but i dont know what is best ....... GSC S2s or GSC S3 or Cosworth M3 plz help me on that what is best for evo ix !!!
Hey, im about to get new cams for my evo ix mr but i dont know what is best ....... GSC S2s or GSC S3 or Cosworth M3 plz help me on that what is best for evo ix !!!
@octavioveliz Thank you soo much for helping me !!!! dude i have 1200cc injectors and i have hks intake and hks turbo n full race manifold .... now i need 2.3 storker kit and a throttle body and fuel pump and fuel rail thats it ryt nuthing else ?????? can u plz tel me name of the company also ????
Hey I forgot to ask you if you upgraded anything else in the head with the cams, I heard it not necessary to upgrade springs and retainers if your gonna keep your stock rev limit
Soooo Sooo nice. I Just Got My Evo VIII 2 Months Ago, and i already put $3k in engine/wheels &Tires into it, and i'm about to put $4k in parts and labor to get me to 400awhp!!! and btw, i'm getting those cams too ! and the gsc beehive retainers and springs. what all do you have in yours?
I was actually pushing 25 PSI on the S1 cams at 330whp, but the gas mileage sucked and so did the drivability. The turbo was always boosting like crazy. Now with the GT35 I get better gas mileage and it only boosts when I'm actually wanting it to.
I was going to get Tomei cams and a Tomei ti extreme exhaust but this has such a Rumble. I don't wanna ask for your "tune" but is there aftermarket/custom Manifold/headers ?
got a call from strictly modified, apparently one of my cylinders has 70% leakdown in compression so the job couldnt be done. Now i gotta figure out what the hell is going on. I wasn't prepared for doing a full head removal. This is going to expensive real quick., I might have to save up and wait.
@octavioveliz For sure bro. Where are you from? Im in Bartlett..like right by the highschool... my friend has a evo 8 also..yellow and built pretty good...id like to find some other owners also.
There is a mass option that the GSC s2 is better then kelford 272. I know people that go kelford 272 to GSC s2. Pretty much best cams you can get for lancer evo 8-9 is GSC S2 cams. Once you hit past 500hp/500tq then id look at GSC S3. I personally have seen everything comp, hks, kelford, gsc, And GSC are by far the best anything on fp black on down these are amazing cams. Biggest thing is power is better then all of them low end with serious high end power. Really help make my car better inROLLS
@octavioveliz Okay cool. I guess I will be doing the swap. I should have went with the S2's to begin with, just didnt wanna deal with the valve train hastle. But oh well, ima get it done. Nice vid bro. Thanks
Is that an Evo 8 and if it is what did you do with the other s1 cams you upgraded from looking for these as cheap as I can find so far $499.99 - would love to buy the s1 from you if you still have them, through paypal. Great sound, I thought someone was moving a motorcycle out from in front of the car at first! Great Echo - I mean, Great Evo! Hope to hear back from you.
@vhuntermani11 Then you might want to get a 2.3 stroker kit, port and polish the head. Maybe get an aftermarket intake manifold or just port it out also. Upgrade your throttle body, get some 1600cc injectors or bigger, a fuel rail. You'll also need a fuel pump if you don't have one yet.
When COVID got me down I just watch this start up vid a few times and I get the strength to go another day
LMAO at the dog!!!
RUNAWAY RUNAWAY!
Never heard an evo sound like that, crazy
this is the best vid i have seen by far, great car too!
I am a big Subaru fan but damn does that sound insane, great job man
Sounds amazing man
That sounds so awesome bro!!
Sounds badass man!!
the sound of that beast! had more rrumble than a scooby!
I know, I love the sound and new power from them!
this car sounds NAAASSSTY!!!! i love it. mine are being shipped as we speak!
still got an evo? i see the gtr in your pfp
Ahahaha!!! the dogs sneeze cracked me up!!
Thank you. I just wish I had the money and time to get it back on the road. About a year ago I damaged the clutch and I haven't had the time or money to replace it.
I have a full build 2.0 long rod on Link G4+ on HKS cams 274/278 running HKS 7460 turbo and while mapping my car sounds just the same but the mapper said it would be a lot better the way he mapped it as in smooth down low, we mapped it on Race fuel and it makes a big difference the way the car sounded.
absolutely sickerning mate :P
You'll love it.
What exhaust is?Amazing sound!
Thanks dude. What do you want to know? So far it's still a stock block, stock head, upgraded springs and retainers, GSC stage 2 272 cams, HTA GT3586 turbo, 3" exhaust, 880cc injectors, and a whole lot of other goodies :D
@octavioveliz thanku so much for help !!! yeah it is just for weekends and my turbo is 62/65 . but i m very confused becoz i want to upgrade the engine .. i dont know what kind of pistons i shound use and what kind of Valve i should use and what other things i should upgrade for get more hp ?????
I ended up doing what you told me and got the gsc s2 cams, gsc beehive valve springs, arp headstuds, walbro 255lph fuel pump, and a tial q 50mm bov for my evo ix, also the aem digital boost gauge. Should be interesting. Car gets dropped off on Wednesday for the install of everything and tune.
hahah, what a cute doggy :)
the dog is craaaazy :D
Fucking nice sound !
Dog: ight imma head out
damn nice evo
Did you degree the cams to make it sound like that
Did you do any supporting mods with the S2's? Valves, retainers etc?
Love it
I like your dog! Haha
@vhuntermani11 how do you stroke to 2.4? Its factory at 2.0? you cant change that?
Hi The S2 cams aid in extra torque or they are the same as any other cams?
@vhuntermani11 It depends on what you're going for, like how do you drive your car? Is it a daily? If it is I'd go with GSC S1s. Or is it a weekend racer? Do you have a 35r turbo or similar size? If you do then I'd go with the S2s. And if it's just a drag car and you don't drive it to anything else, than you'd go with S3s, because a huge turbo would need them. It all depends, hope this helped.
Nice vid. Im using the S1's in my IX, but I wish I would have went with the S2s to begin with. Did you notice a big difference from switching?
did you have the resonator removed? I just can't get over how nice you car sounds good job man
@stryfetew
Isn't the intake side only 274? and the exhaust side 272?
@stryfetew
Yea I just looked on the GSC website it says 274/274 but when I look at say Map Performance or English Racing website it says it's a 274/272 so I don't know what's going on.
Hell the AMS website states 278/274
cool dog
I need this sound on my EVO 7
It really isn't the exhaust because it didn't sound like that when it was just the exhaust installed. The sound changed to that after I installed my turbo kit and cams. But it's an Invidia 3" turbo back stainless steel exhaust to answer your question.
@mollett89 dude you got the evo 8 with vtec?? ima buy that upgrade too! how much and where did u get it??!
@vhuntermani11
well if you only have race tracks in your country then I'm assuming it's a road course right? a 6265 is laggy as hell for a road course. S3's are made for big turbos that are drag cars. My set up for my evo ( I track to) Is going to be GSC S2, BBK-B or a FP Red.
@Btownsoccer22 why ????? then what is the best setup for my car ????
@octavioveliz lol yeah for sure. Im in Bartlett, right by the highschool...where are you from?
My friend also has a yellow evo 8, pretty crazy...
@octavioveliz Hey, im about to get new cams for my evo ix mr but i dont know what is best ....... GSC S2s or GSC S3 or Cosworth M3 plz help me on that what is best for evo ix !!!
@vhuntermani11 What type of driving do you do? Dragstrip or racetrack?
And in general yeah what is your setup. It's pretty crazy.
Hey, im about to get new cams for my evo ix mr but i dont know what is best ....... GSC S2s or GSC S3 or Cosworth M3 plz help me on that what is best for evo ix !!!
Actually they're both 274, you can look at the specs on the GSC site
@07audi4 Invidia 3 1/2 " connected to an AMS downpipe
Really?! Awesome! What turbo are you going to be using?
@mitsuevoRS The cams I'm using are specially designed for the turbo I'm using, but thanks anyways.
@Btownsoccer22 They are both 274. I can't find my sheet right now with my cam specs but i'm 99.9% sure they are 274.
@octavioveliz wait...your turbos in the back??! like behind your bumper?!
SICK!!!
PICS PLEASE??
@octavioveliz Thank you soo much for helping me !!!! dude i have 1200cc injectors and i have hks intake and hks turbo n full race manifold .... now i need 2.3 storker kit and a throttle body and fuel pump and fuel rail thats it ryt nuthing else ?????? can u plz tel me name of the company also ????
Hey I forgot to ask you if you upgraded anything else in the head with the cams, I heard it not necessary to upgrade springs and retainers if your gonna keep your stock rev limit
Soooo Sooo nice.
I Just Got My Evo VIII 2 Months Ago, and i already put $3k in engine/wheels &Tires into it, and i'm about to put $4k in parts and labor to get me to 400awhp!!!
and btw, i'm getting those cams too ! and the gsc beehive retainers and springs.
what all do you have in yours?
I was actually pushing 25 PSI on the S1 cams at 330whp, but the gas mileage sucked and so did the drivability. The turbo was always boosting like crazy. Now with the GT35 I get better gas mileage and it only boosts when I'm actually wanting it to.
Does anyone know how to get this tone or like a deep rumble tone for a EVO 7 ? Like how a wrx deep tone ?
It was a mix between my tune, cams and the exhaust.
I was going to get Tomei cams and a Tomei ti extreme exhaust but this has such a Rumble. I don't wanna ask for your "tune" but is there aftermarket/custom Manifold/headers ?
@Btownsoccer22 yeah ryt its road course .... now i m going for gsc s2 with 2.4l stroker kit with 6265 turbo ....
@bllstrt6 I just recently moved back to Chicago this year. I was living in Texas.
@octavioveliz wait....the evo VIII doesnt have vtec?...
@mitsuevoRS I live in the city at the moment, on the south side about an hour away from you.
got a call from strictly modified, apparently one of my cylinders has 70% leakdown in compression so the job couldnt be done. Now i gotta figure out what the hell is going on. I wasn't prepared for doing a full head removal. This is going to expensive real quick., I might have to save up and wait.
Nice^2
@mitsuevoRS Okay cool, well in that case I'll show you the car in person. I'm actually looking for a few Evo owners in the area.
@octavioveliz haha nice. Well i'll be going "green" in december.
what exhaust do you have?
Did u have to degree them in or are they zeroed out?
@mitsuevoRS Once the weather gets better we'll arrange something.
@octavioveliz For sure bro. Where are you from? Im in Bartlett..like right by the highschool... my friend has a evo 8 also..yellow and built pretty good...id like to find some other owners also.
bump for cute dog sneeze at 0:07.. Oh ya.. nice car too.
@mitsuevoRS yes we can change it .... from 2.0l to 2.4l
@Nebrida23 It's an Invidia, but that isn't why the car sounds like that.
s2's are:
intake: 274 duration with 11.2mm of lift
exhaust: 272 duration with 11.0mm of lift
@octavioveliz WAIT YOU SAID 274 CAMS UP TOP??!
@mollett89 You mean MIVEC?
i have this same car but i paid extra and got the vtec added
how did you get your evo to sound like that you must tell me its fucking sick
There is a mass option that the GSC s2 is better then kelford 272. I know people that go kelford 272 to GSC s2. Pretty much best cams you can get for lancer evo 8-9 is GSC S2 cams. Once you hit past 500hp/500tq then id look at GSC S3. I personally have seen everything comp, hks, kelford, gsc, And GSC are by far the best anything on fp black on down these are amazing cams. Biggest thing is power is better then all of them low end with serious high end power. Really help make my car better inROLLS
i thought the S2 were 274/274?
@octavioveliz Okay cool. I guess I will be doing the swap. I should have went with the S2's to begin with, just didnt wanna deal with the valve train hastle. But oh well, ima get it done. Nice vid bro. Thanks
@octavioveliz Where are you located now? We should cruise sometime
@evox09 Thanks dude
The Dog! hahah
staying on the stock turbo for the time being but pushing the boost up to 26 pound.
Damn, only if my neighbors never complained of loud exhaust
@octavioveliz for sure
Is that an Evo 8 and if it is what did you do with the other s1 cams you upgraded from looking for these as cheap as I can find so far $499.99 - would love to buy the s1 from you if you still have them, through paypal. Great sound, I thought someone was moving a motorcycle out from in front of the car at first! Great Echo - I mean, Great Evo! Hope to hear back from you.
ON THE OTHER NOTE.... CHIHUAHUA FTMFW!!!!!!!!! LOOK AT THAT BEAST... RAZOR SHARP HEARING AT 0:09...
how much vacuum do you pull during cold starts?
@SSGPETTY210 HUGE DIFFERENCE!!!!
@vhuntermani11 Then you might want to get a 2.3 stroker kit, port and polish the head. Maybe get an aftermarket intake manifold or just port it out also. Upgrade your throttle body, get some 1600cc injectors or bigger, a fuel rail. You'll also need a fuel pump if you don't have one yet.
I want a taco now
Haha. That chihuahua tho
Yeah the S2 are 274/274.
Yo I Live a minute away from Bartlett high school. I drive a gunmetal evo 9 MR. I live right off schick and County Farm.
@octavioveliz Ah, thats cool. when im home from WyoTech, we gata try to get a lil gorup going. Thatd be cool.
@yresistme
yupp i did...ask my mom she bought it
I'm not sure, they might be.
Dude, are you ElDiablo from the forum?
lol the chichuhua got scared by the Gsc`s