I have an ER-1 Code on my FZ6, which shares a detuned version of the R6 motor. There is a data wire and data ground that goes between the ECU and Meter. You can try two jumper wires to eliminate any connector possibilities. If that fails for me, I will aim for my ECU first over my meter, given the results of this video.
do you manage to fix your ER-1 issue on your FZ6? how did you solve the issue? i just have ER-1 code appear on my bike today. the speedo km/h and rpm has no function and tempreture guage on full bar.. but my bike still can be start and sound normal
Hello! Is it possible you only replace the ECU, without the contact + keys etc.? I have same error on Fz6 S1 2005, and I want to test to another ECU, but the seller saus it need the whole kit to work, not only ECU. Thanks!
I have both an err-01 and an err-02 on my 2004 R1.. The weird thing is, it only appears over 100 km/h when i'm trying to accelerate, and the bike keeps on running fine but my speedometer suddenly fails and doesn't display the correct speed or no speed at all. According to the service manual, the bike shouldn't even operate with those errors but it starts and runs fine. Only when I'm riding between 100 and 120 km/h and accelerate, the error message suddenly appears, the speedometer fails and the "check engine" light burns. Is anyone familiar with this problem and/or any solutions?
I have a error code _1 on my 2010 Yamaha r1 and its getting really frustrating idk what the issue is. It turns on and runs until it reads about 190 degrees Fahrenheit from cold start and shuts off. The main relay assembly then starts clicking. I replaced the main assembly relay problem still occurs. Then a min goes by it lights back up and starts again. Idk what to do. Plz help
Bonjour mon frère pouvez-vous m’aider j’ai le même problème sur une Yamaha r6 2011 je donne a la clé elle fait exactement le même problème que vous er_1 er_2 pensez que ça peut être le compteur? j’ai déjà acheté deux ecu 😢
I have an ER-1 Code on my FZ6, which shares a detuned version of the R6 motor. There is a data wire and data ground that goes between the ECU and Meter. You can try two jumper wires to eliminate any connector possibilities. If that fails for me, I will aim for my ECU first over my meter, given the results of this video.
do you manage to fix your ER-1 issue on your FZ6? how did you solve the issue? i just have ER-1 code appear on my bike today. the speedo km/h and rpm has no function and tempreture guage on full bar.. but my bike still can be start and sound normal
@@walijumaat2158 Did you resolve? I now have the problem on 07 R6
Hello! Is it possible you only replace the ECU, without the contact + keys etc.? I have same error on Fz6 S1 2005, and I want to test to another ECU, but the seller saus it need the whole kit to work, not only ECU. Thanks!
I have both an err-01 and an err-02 on my 2004 R1..
The weird thing is, it only appears over 100 km/h when i'm trying to accelerate, and the bike keeps on running fine but my speedometer suddenly fails and doesn't display the correct speed or no speed at all.
According to the service manual, the bike shouldn't even operate with those errors but it starts and runs fine.
Only when I'm riding between 100 and 120 km/h and accelerate, the error message suddenly appears, the speedometer fails and the "check engine" light burns.
Is anyone familiar with this problem and/or any solutions?
Wire shorting or grounding
Bro. Did you fix it. I have the same issue right now
@@Rodingaralte5454I have the issue right now too😢
Hi my friend so, resumen you change the wire Arne's and de principal ECU??
I have a error code _1 on my 2010 Yamaha r1 and its getting really frustrating idk what the issue is. It turns on and runs until it reads about 190 degrees Fahrenheit from cold start and shuts off. The main relay assembly then starts clicking. I replaced the main assembly relay problem still occurs. Then a min goes by it lights back up and starts again.
Idk what to do. Plz help
Had the same exact problem on my 2004 R1.Turns out it was a crankshaft position sensor now runs like new. Found one for $12 should give it a try
My R1 has a check engine on how/what I should check to turn it off please
hello do you know what is the code of the harness of the Yamaha r1 2008 without coded key

Bonjour mon frère pouvez-vous m’aider j’ai le même problème sur une Yamaha r6 2011 je donne a la clé elle fait exactement le même problème que vous er_1 er_2 pensez que ça peut être le compteur? j’ai déjà acheté deux ecu 😢
my 03 r1 one has the er1 code.. it ran good last week went to put tags on it now it just spins over thats it
so how did you solve that
I have a 02 r1 and mines just got that error 1 and the speed meter is frozen on that screen ? I tried disconnect the battery and its still there?
How did you end up solving this mine has the same problem
J’ai le même problème
hola disculpa cual fue la falla tengo el mismo problema
Lo soluciono ?
@@carlosorlandoriveraolmedo20 El cambio el Computador de la moto