👉 Please enable subtitles in your language 👈 Thanks for watching 👍 After you watch this video ALSO SEE 👉 ua-cam.com/video/iqohMS5mCzE/v-deo.html 👈 You will Enjoy ! Stay Safe !!
Thank you for teaching me this! My only question is why does the second bucket stop the first from collapsing? I guess it creates a vacuum on the outside of the first bucket that balances out the vacuum being applied on the inside?!?! That was super clever, and had you not demonstrated it I wouldn’t believe someone that told me that! Thank you again!
The outer bucket also acts against buckling, i think, making it much stronger this way. Buckling is a problem because it is self- reinforcing. If the inner bucket deflects from circular at imperfections, it gets weaker because its arc gets flatter in spots. Those spots will be sucked in, collapsing the bucket at a certain amount of vacuum. The outer bucket adds stiffness and keeps it circular against higher vacuum than a single bucket would.
I built one of these into a simple plywood cart, and included hose hooks on the side, extension cord storage on the other side, a power strip on the front, a flat upper surface to lay tools on, and an anglepoise lamp on a telescoping column. Every part came from things I already had, and it has been my constant 'Buddy' around the workshop for the last eight years! 😊
Just to add this is *not new*. It’s been around for decades. You attach the vacuum hose to the (in the shops version) metal container, then you can vacuum out cold ash from fireplaces. Saves dust and mess in houses. It has an internal filter stopping the residue from reaching the main vacuum
I did something similar, but used a ready-made cyclone that I found on eBay, and a plasterer's bucket. Good idea to use two buckets though, as one isn't quite stiff enough.
Just take an industrial vacuum cleaner with no filter. And you can also vacuum fluids with it. Then open the vacuum cleaner and throw the dust away. That's it.
@@rinzler9775sanding dust is too light for that kind of "filter". It can work well only if dust is heavy enough to fall down in the bucket. Let's consider why vacuum cleaners for wall sanders are different (and usually more expensive) than for carpenters. Wooden dust is much heavier.
Bonjour, très bonne idée de récupérateur pour aspirateur! pouvez vous me dire ou peut on acheter les deux pas de vis, et de quelles dimensions sont ils ?
Hi my question to you is I herd sometimes these buckets cave in my question is is a possible remedy to drill a small hole in the bucket lid or in the side of the bucket near the top ? thoughts please thank you !!!! I mean I would be hesistant to try to make a home made relief valve it would make me nervous to make a home made device that I could not be sure how safe it was thoughts please thank you!
Porque se va la basura, la tierra, la suciedad hacia abajo y no sube por el otro tubo hacia la aspieadora ? Digámoslo cuál es el principio de ese sistema
Te cuento rapidamente: se forma un torbellino o movimiento circular del aire en el interior del tarro, como en todo mov. circular las particulas mas pesadas van al exterior y al rozar con las paredes pierden energia y caen al fondo, lo mas liviano (polvo) esta cerca del centro y es aspirado. saludos !
You need a vacuum with a disposable bag. The modern cyclone vacuums are useless for real work. In UK the brand Henry is popular for workshops and carpenters etc.
This though good can be much improved. The problem with this design is the disturbance to the airflow the elbow makes causing excess particles to clog the vacuum filter - a side entry is much better. Adding a Thein baffle turns a good tool into a brilliant one. There are plenty of videos on YT about this such as Matthias Wandel's most professional ua-cam.com/video/z-xhYnWDCd0/v-deo.html. I botched together a simpler version in an afternoon - with the baffle and side entry - and I regard it as the best tool I've ever made for myself. 99%+ of the dust goes in the bucket and the bucket gets filled to the brim before there is any problem of dust entering the vacuum cleaner.
I love the simplicity of this build. Wandel's approach is great if you already have $5,000 to $10,000 worth of machinery needed to build it. How do you know Wandel's is an improvement? How do you know the (complicated) side entry is better? Adding a Thien style baffle really, really complicates the project, and does it really make it work better? Oneida would tell you different. All I'm suggesting is that unless you have some experience designing and testing vacuum systems and/or particle separators, you can't just look at something and proclaim that one is better than another. And if one is 99% efficient and the other is 94% efficient but costs a fraction of what the better one costs, is it really better?
@@dchall8 thanks for your reply, I started out with this kind of system and its good, it is a massive improvement over having nothing. Nevertheless adding a Thien baffle and simple side extraction made it significantly better for me, keeping all except the very finest dust out of the vacuum and allowing me to fill the bucket almost up to the bottom of the baffle before getting problems. I didn't find making the baffle difficult (it's just two circles to cut from a piece of ply) and it was easy to screw into the inside of the top of the inverted bucket. I admire Wandel, he has a level of precision I don't match but mine cost me no more than a couple of hours of work and serves me well. Horses for courses.
you've just converted your canister vac to a shop vac. I've seen this done before on youtube. It's fine but I prefer my shop vac. It's on wheels and easier to move around.
Shop vac still need to change dust filter and dust bag. I made an extra dust bin with cyclone seperator on top of it before it goes to vacuum cleaner. Now over one year i still have a clean dust bag inside vacum cleaner even though i emtied several times it self made dust bin.
Hatte mal so einen, hat null komma nix gebracht. Das Zeug ist direkt in den Staubsauger und hat innerhalb weniger Sekunden den Staubsack platzen lassen...eine unglaubliche Sauerei...😂😢😅 Den Staubsauger konnte ich dann auch nur noch draußen benutzen...
![Make your own cyclone dust collector [DIY] Integrated type](http://i.ytimg.com/vi/zYulExbm6ec/mqdefault.jpg)
👉 Please enable subtitles in your language 👈 Thanks for watching 👍
After you watch this video ALSO SEE 👉 ua-cam.com/video/iqohMS5mCzE/v-deo.html 👈 You will Enjoy ! Stay Safe !!
Me encanta cuando los profesionales y los expertos hacéis vídeos para tontos.
@@docstrench948😂😂😂😂
😊
Thank you for teaching me this! My only question is why does the second bucket stop the first from collapsing? I guess it creates a vacuum on the outside of the first bucket that balances out the vacuum being applied on the inside?!?! That was super clever, and had you not demonstrated it I wouldn’t believe someone that told me that! Thank you again!
Yes, very clever, that´s exactly what hapens with the second bucket. Thx for watching !
The outer bucket also acts against buckling, i think, making it much stronger this way.
Buckling is a problem because it is self- reinforcing.
If the inner bucket deflects from circular at imperfections, it gets weaker because its arc gets flatter in spots. Those spots will be sucked in, collapsing the bucket at a certain amount of vacuum.
The outer bucket adds stiffness and keeps it circular against higher vacuum than a single bucket would.
@@Repairman10169 : I reinforced mine in a different way... your way is much simpler and effective! 😊
I built one of these into a simple plywood cart, and included hose hooks on the side, extension cord storage on the other side, a power strip on the front, a flat upper surface to lay tools on, and an anglepoise lamp on a telescoping column. Every part came from things I already had, and it has been my constant 'Buddy' around the workshop for the last eight years! 😊
Great !! Thanks for watching 👍🏻
Great idea to protect the vacuum cleaner
Thx !
Excelente idea. Muchas gracias maestro. desde Portezuelo. Uruguay.
Muchas Gracias por ver ! Conozco Portezuelo es muy lindo lugar ! Saludos !
Yes
@@Repairman10169hi
Brilliant in its simplicity.
Glad you like ! Thx for watching !
❤❤❤😂
Brilliant idea. Well done
Thanks !!
Great idea, very well presented.
Hi ! Thx for watching !
Just to add this is *not new*. It’s been around for decades. You attach the vacuum hose to the (in the shops version) metal container, then you can vacuum out cold ash from fireplaces. Saves dust and mess in houses. It has an internal filter stopping the residue from reaching the main vacuum
WOW...great ideas 💡 ✨!!! I will definitely use some of these ideas. THANK
Excellent Sr. Great idea !. Congrats! Thanks!.
Glad you liked , Thanks for watching !
Hi❤❤❤
Excelente, simples e objetivo. 👍
Obrigado !
I did something similar, but used a ready-made cyclone that I found on eBay, and a plasterer's bucket. Good idea to use two buckets though, as one isn't quite stiff enough.
Great ! thx for watching !
Just take an industrial vacuum cleaner with no filter. And you can also vacuum fluids with it. Then open the vacuum cleaner and throw the dust away. That's it.
La idea en si esta buena, pero se dificulta para su traslado si se va a aspirar un salon grande. Pero bien !! 💪💪
Si tienes razón habria que ponerle rueditas ! Saludos !
That’s really cool and smart.
Thx for watching !
ente idea amigo y tengo bastantes valdes para hacer esto gracias por compartir 👍😉😁
Gracias por ver ! Suerte !
Super idée merci 👍
👍
GÉ NI AL aussi efficace que facile à réaliser et aussi léger que pas cher❤❤❤❤. Merciiiiiiii
Mercii 😊
Someone else in these comments has probably also suggested using a 32mm hole saw instead.
Otherwise nice alternative to diy cyclone.
thanks for a practical solution
Thanks 👍
Idea grandiosaaaaaaaaaa,bravo!
Very good !👍 great idea.
If you put water in the bucke it's even better. Grateful.🙏
Yes you´r right ! Thx for watching !
Parabéns pelas dicas. Grato.
Obrigado !
Great! Too easy and too useful!
Thanks for watching 👍
I like that idea!👍👍👍
Glad you like it! Thx for watching !
Your build yourself a dust deputy, sort of. Good job
Thanks for watching !
Perfect tips. Thanks !
My pleasure!
Muito bom! Show! Sabe me dizer se dá certo em usar para lixar massa corrida em parede? Será que o pó assenta no fundo do balde? Obrigado
Bloody good idea mate 👍👍👍
Thanks mate !
Excelente idea💡. Gracias
Gracias a ti
CONGRATULATIONS. GREAT IDEA. WHAT DO YOU NEED THE BLUE BUCKET? GRAZIE. FRANZ. ( Bologna Santa Viola - Italy)
I would just carefully sweep up the bulk of the dirt, then vacuum the residue left. No muss no fuss and crafting filters.
These are great if working with plaster sanding dust
@@rinzler9775sanding dust is too light for that kind of "filter". It can work well only if dust is heavy enough to fall down in the bucket.
Let's consider why vacuum cleaners for wall sanders are different (and usually more expensive) than for carpenters. Wooden dust is much heavier.
Esse foi apenas um exemplo pra ficar mais fácil de fazer o vídeo, em muitos lugares não tem como varrer
These crafts are invasion
Én nem hiszem el amit mutat.Valami sántít!☹🕊
بسیار عالی و تشکر از ساخت ابتکاری این وسیله کاربردی..........موفق باشید 👏👏👏👍👍👍❤
Una forma practica de hacer un separador ciclónico!!!
Así es. Saludos 👍
I don’t see how a bucket on the outside is going to stop the inner one from collapsing?
Vacuum forms in betwen the buckets...
Wow Pretty Cool. Thanks
Thanks for watching 👍
It's not the daftest idea I've ever seen 👍
The Triton version of this idea has a filter on the bucket outlet & it works well.
Yes works well, thx for watching !
This is how a cyclone technology vacuum works.
Exactly 👌
Excellent! 👍
thx for watching !
Ge-ni-al, Parabéns.
Obrigado !!
Çok güzel harika süper bir uygulama 👏👏👍
👍
Maybe it can also work when vacuuming liquids, and keep the vacuum cleaner dry?
Yes i think it should, i will try.
It will, just don't over fill it
Do the two attachments you attach to the bucket have a different diameter?
Bonjour, très bonne idée de récupérateur pour aspirateur! pouvez vous me dire ou peut on acheter les deux pas de vis, et de quelles dimensions sont ils ?
Very good...
What are the hose connections attached to the top lid called? Where can I find them? Are they called bulkheads?
Please enable subtitles i explain there.
toll...muss ich ausprobieren...
Glück ! Danke fürs zuschauen !
SUPER ‼‼🏅🏅
👍
Hi my question to you is I herd sometimes these buckets cave in my question is is a possible remedy to drill a small hole in the bucket lid or in the side of the bucket near the top ? thoughts please thank you !!!! I mean I would be hesistant to try to make a home made relief valve it would make me nervous to make a home made device that I could not be sure how safe it was thoughts please thank you!
muy buena idea
Половина в фильтре, должно быть! Лучше метлы и совка ещё не придумали.
2:55 so creative
Thanks !
@@Repairman10169 hi
Porque se va la basura, la tierra, la suciedad hacia abajo y no sube por el otro tubo hacia la aspieadora ? Digámoslo cuál es el principio de ese sistema
Te cuento rapidamente: se forma un torbellino o movimiento circular del aire en el interior del tarro, como en todo mov. circular las particulas mas pesadas van al exterior y al rozar con las paredes pierden energia y caen al fondo, lo mas liviano (polvo) esta cerca del centro y es aspirado.
saludos !
好聰明。我本來以為是要做成水吸器
Hola, como se llama ese tipo de acople
Pregunto puedo limpiar mi tanque de agua con eso
Would something like this be good for an ash vacuum. Because the wons out there clock up very easy?
You need a vacuum with a disposable bag. The modern cyclone vacuums are useless for real work. In UK the brand Henry is popular for workshops and carpenters etc.
This though good can be much improved.
The problem with this design is the disturbance to the airflow the elbow makes causing excess particles to clog the vacuum filter - a side entry is much better. Adding a Thein baffle turns a good tool into a brilliant one.
There are plenty of videos on YT about this such as Matthias Wandel's most professional ua-cam.com/video/z-xhYnWDCd0/v-deo.html.
I botched together a simpler version in an afternoon - with the baffle and side entry - and I regard it as the best tool I've ever made for myself. 99%+ of the dust goes in the bucket and the bucket gets filled to the brim before there is any problem of dust entering the vacuum cleaner.
Yes agree ..thanks for comment
I love the simplicity of this build.
Wandel's approach is great if you already have $5,000 to $10,000 worth of machinery needed to build it.
How do you know Wandel's is an improvement?
How do you know the (complicated) side entry is better?
Adding a Thien style baffle really, really complicates the project, and does it really make it work better? Oneida would tell you different.
All I'm suggesting is that unless you have some experience designing and testing vacuum systems and/or particle separators, you can't just look at something and proclaim that one is better than another. And if one is 99% efficient and the other is 94% efficient but costs a fraction of what the better one costs, is it really better?
@@dchall8 thanks for your reply, I started out with this kind of system and its good, it is a massive improvement over having nothing. Nevertheless adding a Thien baffle and simple side extraction made it significantly better for me, keeping all except the very finest dust out of the vacuum and allowing me to fill the bucket almost up to the bottom of the baffle before getting problems. I didn't find making the baffle difficult (it's just two circles to cut from a piece of ply) and it was easy to screw into the inside of the top of the inverted bucket. I admire Wandel, he has a level of precision I don't match but mine cost me no more than a couple of hours of work and serves me well. Horses for courses.
Serviria também para aspirar pequenas porções de água em pisos???? Preciso um que aspire água
Si sirve !
Like dari kota Jambi
you did not show the bit where you cleaned out the filter in the machine
Thank you very much ❤
I use this way to change my engine oil
Great !
Здравствуйте.Будтьте добры ссылку на резьбовые муфты?Благодарю.Hello.Would you kindly link to threaded couplings?Thank you.
зачем усложнять жизнь резьбовыми муфтами, если есть сантехнические комплектующие и детали от старого пылесоса...
Been there, done that. Bucket collapsed.
Mine too, solved with another on the outside as i show, or you can reinforce with some wood.
you've just converted your canister vac to a shop vac. I've seen this done before on youtube. It's fine but I prefer my shop vac. It's on wheels and easier to move around.
Yes you are right. Thx for watching !
Shop vac still need to change dust filter and dust bag. I made an extra dust bin with cyclone seperator on top of it before it goes to vacuum cleaner. Now over one year i still have a clean dust bag inside vacum cleaner even though i emtied several times it self made dust bin.
I subscribed. 🙂
👍
❤🙏🏻👍👍👍👍👍 गजब ideas 🌷
देखने के लिए धन्यवाद !
Лучше металлическая емкость, а если установить сброс излишнего давления, то будет ещё лучше. :)
Perfect.master
Thx for watching !
ممكن تقول لي الماده اللي انت لحمتها بيها بتاعت المواسير ما نفعش
I use water in mine to sand drywall. Meile are expensive vacuums.
Great ! thx for comment !
Cách làm hay quá
Hatte mal so einen, hat null komma nix gebracht. Das Zeug ist direkt in den Staubsauger und hat innerhalb weniger Sekunden den Staubsack platzen lassen...eine unglaubliche Sauerei...😂😢😅
Den Staubsauger konnte ich dann auch nur noch draußen benutzen...
Muy bien!!
Gracias ! Saludos !
Wenn du einen Ring aus Holz in die Mitte des Eimers machst, kannst du dir den zweiten Eimer sparen!
Ja vielleicht, ich werde es versuchen, danke für den Tipp!
Autrement, on peut aussi prendre un balai & une pelle!, investissement minimal, énergie utilisée gratuite ( huile de coude ) pour un même résultat.
Super ! mais pourquoi le bidon dans le bidon ne se déforme pas?
Un vide se forme entre les 2 tambours. salutations !
merci de votre explication!@@Repairman10169
What is the name of these closed pipes
Would this same method work sucking water out of carpet. ?
Yes iit works
Donde se compran esos adaptadores
Mejor que recoja la basura con una pala y después pase la aspiradora.😊😊
Good
Thanks for watching !
Tu achète un aspirateur spécial pour les travaux
Yo le pondría un poco de agua al tacho
Si seria mejor. Saludos !
ویدیوتون عالیه
thin parts will get stuck in filter of the vacum cleaner and basta😢 only the bigger ones in the bucket
Wrong.. i have used for some months now with great results, filter always clean !!
Love u .
Nice tips !! Then I buy Dyson instead
Great 👍
Incrível!
Obrigado !
Маленькая доработка. Чуть пониже опустить боковое колено.
I can't see the wife going at that lmao
Elektirikli süpürgenin içine hiç toz gitmemesi mümkün değil ‼️‼️😅
and remember, if the ladies dont find you handsome they should at least find you handy
haha, yes don´t ask me how i know that !!
So why do you think we ladies could not buildt this?
3:37 this shaming moment when you need to make the clip.
Ben filtre taktım ondan bile geçti bu mümkün değil
Thankyou sir
Thanks for watching !!
Ouais bonne idée !! voilà voilà
Merci !
Top !!!!!
thx for watching !