Whiskey Smokers Woodworking Project That Sells
Вставка
- Опубліковано 17 вер 2022
- 🔥All-Inclusive CNC File Membership: www.cncwithme.com/
Maketember is here!! Using my Onefinity Journeyman X-50 hobby CNC router to make a Whiskey Smoker! These are easy projects that you can do in one day. I’ll be uploading 30 projects over the next 30 days- follow along as we talk about CNC project pricing!
- - -
➡➡CNC Digital Files: www.cncyalater.com/
➡➡My Instagram: / hamilton_dilbeck
➡➡My Etsy: www.etsy.com/shop/TheHamCrafted
- - -
Best Seller Files: www.etsy.com/listing/13591153...
Whiskey Smoker Vectors: tinyurl.com/WhiskeySmokerVectors
- - -
🛠️Build Overview🛠️
➡➡Downtown Jenny .25” Downshear Bit - .1” DOC, 120 IPM, 4.5 RPM on Makita Dial
➡➡1” material worked for me, but obviously you can play around with it.
➡➡Pipe Screens: amzn.to/3BmxcJP (Amazon Affiliate Link)
➡➡Butane Torch I'm Using: amzn.to/3UdQTw9 (Amazon Affiliate Link)
➡➡Butane Fuel: amzn.to/3SaKrUx (Amazon Affiliate Link)
➡➡Double Sided Tape I Use: amzn.to/3cIjNDE (Amazon Affiliate Link)
➡➡Mineral Oil I use: amzn.to/3B0Zomx (Amazon Affiliate Link)
- - -
🤝Maketember Supporters🤝
🔥Jenny Bits!
➡➡Use Code: MAKETEMBER for 10% off your entire order during September 2022!!!
➡➡Shop: tinyurl.com/JennyBitsShop
➡➡Instagram: tinyurl.com/CadenceMFGInstagram
🔥Huntington Builds!
➡➡Use Code: MAKETEMBER for 10% off your entire order during September 2022!!!
➡➡Etsy: tinyurl.com/HuntingtonBuildsEtsy
➡➡Instagram: tinyurl.com/HuntingtonBuildsI...
➡➡UA-cam: tinyurl.com/HuntingtonBuildsY...
➡➡LinkTree: linktr.ee/huntingtonbuilds
🔥Myers Woodshop!
➡➡Website: tinyurl.com/MyersWoodshop
➡➡Etsy: tinyurl.com/MyersWoodshopEtsy
➡➡UA-cam: tinyurl.com/MyersWoodshopUA-cam
🔥Rowdy Roman!
➡➡Use Code: MAKETEMBER for 10% off your entire order during September 2022!!!
➡➡Website: www.rowdyroman.com/
➡➡Etsy: tinyurl.com/RowdyRomanEtsy
➡➡HoseBoom: tinyurl.com/RHoseBoom
➡➡Spindle Light: tinyurl.com/RRSpindleLight
➡➡Instagram: tinyurl.com/RowdyRomanInstagram
➡➡Facebook Page: tinyurl.com/RowdyRomanFaceBook
🔥Onefinity CNC!
➡➡Website: tinyurl.com/Onefinity
➡➡Forum: tinyurl.com/OnefinityForum
➡➡UA-cam: tinyurl.com/OnefinityCNC
- - -
🔥Send Me Stickers🔥
Hamilton Dilbeck
525 Tribble Gap
P.O. Box 3244
Cumming, GA 30028
- - -
🔥SHIRTS🔥
➡➡Maketember: amzn.to/3Rs2WUb (Amazon Affiliate Link)
➡➡I Don't Do Kitchen Cabinets: amzn.to/3TDSRpk (Amazon Affiliate Link)
- - -
📷Instagram: tinyurl.com/HamiltonDilbeckIn...
- - -
I don’t have experience with the Shapeoko CNC Machine or the Xcarve CNC, but I do know that the Onefinity CNC machine is awesome!
- - -
Amazon Affiliate Links don’t cost you extra, but do give me a small amount of commission. Using the links is a great way to support me!
- - -
Thanks for watching! - Розваги
Got me on the whiskey chug
have to say thank you for this video. Watched a lot of others but yours is just simple and understandable! Good job. Short and sweet highly recommend!
The squishing sound from the shavings being pressed into the smoke - satisfying!
I’ve really been loving your videos, thanks for posting!
Thanks so much!
This has been my favorite set of days so far. Love the little Fidget Men toys, the dice bowl/tray and LOVE the whiskey smoker! What an awesome series. Also, if anyone is thinking about ordering from Cadence MFG, do it! I got my bits immediately and the customer service is amazing.
He really is awesome about getting orders out the door quickly!
Thanks!!
Awesome content as always man 👍
I think you will go viral eventually, top vids are those torture tests I haven’t watched them yet but why not do more types of those but just take time to be creative with the ideas. The sled video is good because it’s a cool big idea. Build big stuff or cool stuff with viral intention. I don’t know I’m throwing ideas they probably suck because I am not a wood worker but like, building a wooden bike, wooden car, wooden optical illusion pieces, wooden gun, wooden chandelier (cool furniture stuff I don’t know this one is less viral probably) wooden Xbox like put the computer stuff in it but build the shell as wood including the controller that would be cool. I don’t know but those torture ones expand on that and the sled one did well because it was epic in size I think, haven’t watched it yet. Just watched the whisky one but that one was cool af. Keep going man.
Edit:
Watched the sled and I was shocked! I saw the thumbnail and the way you stood behind it made me think you were building a sled on rails like an actual sled lmao. I don’t know how many other people thought that. Or how many people thought it was about a tool when they clicked on it. But if you notice the view duration on that is less than normal they probably thought you were building a sled to sit inside on rails. If so, build epic stuff out of wood and you will start getting ton of views. If not disregard my advice, this niche I know nothing about it isn’t similar enough to other niches I do.
I also watched the torture test but not sure how to repeat this. I’m trying to think of ways you can repeat the success for the torture and can’t think of much. But building epic or creative wooden things you can repeat the success I know you could get huge. Like these tech channels build like giant spider robots and self aiming basketball throwing stuff. They make big and out of the ordinary things that have viral appeal. If you can find a way to do this with wood objects youll sell tons of the Etsy plans just promote some cool plans at the start of videos or the middle. Use the crazy projects that bring views to promote the smaller Etsy stuff you sell.
I’m trying to think of stuff it’s hard to think of things for you I’m sorry but I know you can think of cool stuff. Designing Paper airplanes out of wood (might be dumb I don’t know just trying to spark idea)
The thumbnail with the wooden people is along the lines of this already. Unusual things. Anyways keep it up man cool channel!
What about wrapping my car in wood. Or giving my car a wooden wrap. Can you put wood prices together in the shape of your car body and sand it nice so it looks like your cars body is wood, then stain it? That’s real cool I think that would get lot of views. But that’s what I’m saying like over the top crazy stuff. Sell your Etsy projects within the video where people can make stuff at home. And you will get 5m views on a video. Think about it. If you made 25k from Etsy off 1M views in one year. What would happen if you had viral vids that hit 1-2M each once a month. Selling Etsy in them smaller cool projects you can promote 1-2 min in the start or middle of this bigger project video.
You could potentially make like a boat load of money.
Also if you are going for a purely educational channel disregard everything I’m saying. It’s cool you can do the car wrapping one in educational way show tools you use and techniques and stuff as you make it. But it’s more fun for the mass of people.
Great items today and looking forward to the CNC chess pieces tomorrow 🙂
Love your content!
Thanks so much!!!
I would think you can use that mix for camp8ng fires starters, too. Maybe sell them if you're in the right area. Just cotton balls soaked with the mix. Package them in a heavy duty freezer bag.
Fire day was a busy one!
I know right!!
I need to get rid of my day job to try all these projects.
➡➡My Website: www.cncyalater.com/
🔥All-Inclusive CNC File Membership: www.cncwithme.com/
Great!!! The comment at 7:25 of the video has "Who woods are these I think I know, his house is in the village though... ....... ...." stuck in my head!!!
haha that makes me happy!
,a cool video keep up the great content.. Thank you…..
Thanks, will do!
@@HamiltonDilbeck Thank you very mutch... have a nice day.... see you….
THANKS! I bought your whiskey smoker plans (much easier then starting from scratch) love the chimney design, i used a bowl bit to add a radius to the outside & burn camber inside. Bought 4/4 rough white oak & planed it to 1" thick, thicker gives it a great look. Will see how they do at the craft shows. One question: How do you make the chips?? I used a hand help power planer on the deepest setting and they look ok but still a little "fine" I think.
Ken
I use a Forstner bit in my drill press to make shavings. . I also used a bowl bit (3/4) to carve this. I love the extra detail that gives.
I use a Forstner bit in my drill press to make shavings. . I also used a bowl bit (3/4) to carve this. I love the extra detail that gives.
Great video Hamilton. Do you have a link for the beeswax and soy wax? Would also love to know you're recipe for the wood butter.
What did you use to finish them? I was thinking mineral oil, but didn't know if that was a good idea or not. BTW, purchased your vectors today and cranked out 5
What did you use for the chips here? We're trying sawdust from our CNC dust collector, and it's just going up too quickly, and not generating smoke.
What finish did you us on it?
If I wanted to order 75 cocktail smokers, can you make them for me? I can provide the screens. Just need the smoker? If so, how much would you charge?
Useful gadget if you're a whiskey drinker.
I hate to even ask because you already provided so much great information, but how to you go about making your shavings?
I use my planer to make the shavings
Can i ask a really dumb question but could u do this without a CNC and do the ashes not fall through the mesh into the glass or am i being really dumb. 🏴👍 Ps amazing video
If your f&s are dialed in, you can just use the cnc chips
Very true!
Just got the file to cut this smoker out. Do you remember what your feeds and speed, etc. setting were for this project?
check out the description under "build overview" thanks!
I'm a little disappointed in that all I got with this package was the vectors. Could you please supply some data on depth of cuts for these pocket paths? Don't get me wrong, I know it would be a fairly simple matter to figure out for myself, but I just expected more for my purchase (is that wrong of me?)... I mean, it was kinda like getting a lego set without any instructions. (my $0.02) Thankee!
I'm sorry that you're dissapointed with your purchase. Try clearing half your material thickness. Pocket out that amount for the shaving area, and then an additional .125" for the pipe screen.
@@HamiltonDilbeck Thank you sir! I mentioned these to someone in passing and now they're considering buying them from me in quantity to give as corporate Christmas gifts, so I'm already working on how to best incorporate their logo ...so it just kit me... weird... that all I was getting was (in essence) concentric circles! Thank you for understanding (and for all the work you put into making available all of these designs)!
One other question... I was hoping you would explain in one of your videos the thinking behind the design of the Maketember logo. That kind of thing always interests me!
@@FullSailDale1 No worries. Took a long time for me to make those concentric circles. Have a good one.
I agree. I bought the file pack, and literally its the same vector file with just some different images on it. I was expecting more details on cut depths at least. At least the comment above here helped
What if you dont have a cncmachine
Do you have a recommendation where to buy lumber in the Atlanta area?
I go to Peach State Lumber!
Where do you get the clothe baggies
amzn.to/3kbMw7o
Here ya go
Hamilton.... as a non-drinker myself I have to ask (because engagement is good on UA-cam) why do you want to smoke your whiskey??
Eh, I think its really just a personal thing. I don't really think it does that much. But then again I'm not really a whiskey drinker
Do you have anyone making the poll for you yet?
I'm going to use StrawPoll! It seems like the easiest way to get it done this time!!
um...why aren't you using the pour spout on the canner? seems a lot less messy and less waste - just sayin'
It's not meant for wax. The spout is plastic and doesn't heat up the cooled wax from previous melts in it. It might if it were changed over to a brass spout- but I've never done that.
Lol, nice video! (And doesn’t even drink whiskey!)
How to make a whiskey smoker
Step one buy cnc machine
'Welt the max', how much apple juice did you drink?
gah so much...
World's oldest? Hmm, it's got to be quick hide the prosti-. No, maybe tic-tac-toe?