AUTOMATED Primer Pocket Reamer & Swage for the Lee App - Automatic Processing Press.
Вставка
- Опубліковано 11 вер 2024
- ➡ SPECIAL THANKS TO MR. GJ FOR MAKING THIS PROJECT POSSIBLE.
Automated Reamer & Swage for primer pockets:
Using the Lee Precision Automatic Processing Press ( Lee App 90933), Lee APP Primer Pocket Swage kit (90237), Dillon case feeder and reamers from Lyman, Hornady & Burstfire.
----------------------------------------------------------------------------------------------------------------------------------------------
Disclaimer:
All information in this video is merely for informational purposes. The same is not intended as a substitute for professional advice. Should you decide to act upon any information on this video or channel, you do so at your own risk.
Videos on this channel are for informative, and entertainment purposes only. Using any of the information is at the risk of the individual using the information. We (including UA-cam) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. By viewing or flagging this video you are acknowledging the above.
----------------------------------------------------------------------------------------------------------------------------------------------
MATERIAL LIST:
V1, V2, V3: DRIVE SHAFT: _ M12 EN24 Type Shaft.
V1, V2, V3: PILLOW BLOCK BEARING: _ UCP210 _ FSB M12 Bearing block.
V1, V2, V3: PRESS: _ 90933 _ Lee Precision Automatic Processing Press ( Lee App).
V1, V2, V3: PRESS ATTACHMENT: _ 90237 _ Lee APP Primer Pocket Swage kit.
V1, V2, V3: NEW SPRING: _ 5061032 _ WÜRTH Compression Spring 1.0 x 32 x 10 mm .
V1, V2, V3: REAMER BIT: _ CPT-Reamer Set _ Burstfire LP Reamer.
V1, V2, V3: REAMER BIT: _ 7990365 _ Lyman LP Reamer.
V1, V2, V3: REAMER BIT: _ 390751 _ Hornady LP Reamer.
V1, V2, V3: MAIN STEEL FRAME: _ 5/16 plate, 15″ x 9″ x 4.5″ / 8 mm plate, 381 x 228 x 115 mm.
V1, V2, V3: PRESS SUPPORT PLATE: _ 3/8 plate, 4″ x 3.15″ / 10 mm plate, 80 x 100 mm.
V1, V2, V3: MOTOR SUPPORT PLATE: _ 1/8 plate, 8.26″ x 5.51″ / 3 mm plate, 210 x 140 mm.
__, V2, V3: DRIVE MOTOR: _ 6M71B4 _ Elvem 1 phase motor, 230VAC, 1325rpm, 0.37kW.
__, V2, V3: MOTOR STARTER: _ NS2-25-4 _ Chint Manual motor Starter, 2.5A to 4.0A, AC.
__, V2, V3: DRIVE BELT: _ 13A700MC _ Good Year, V Type 1/2 inch belt, 700mm.
__, V2, __ : PULLEY: _ SPA V-Pulleys, 1/2, (SPA 100x1 & SPA 63x1).
__, __, V3: PULLEY: _ SPA V-Pulleys, 1/2, (SPA 100x1 & SPA 43x1).
V1, V2, V3: MAIN BOLTS USED: _ (4pc_M10x30), (4pc_M6x18), (3pc_M6x25), (8pc_M5x12).
V1, V2, V3: OTHER ITEMS: _ Bolts, nuts, washers, spring washers, wire, cable ties.
V1, V2, V3: OTHER ITEMS: _ sliders, hinges, paint, wall plug, enclosure box, Perspex.
V1, __, __ : MOTOR SUPPORT PLATE: _ 1/8 plate, 4.73″ x 5.32″ / 3 mm plate, 120 x 135 mm.
V1, __, __ : DRIVE MOTOR: _ XD-42GA775 Xin Da motor company _ 12VDC, 600rpm, 42W.
V1, __, __ : POWER SUPPLY: _ MKC-12V5A _ Melehioni Ready co. ltd, 12VDC, 5000mA.
V1, __, __ : DC CONTROLLER: _ X00166MV8J _ Kyrio DC motor Controller, 12VDC, MHHQRC.
V1, __, __ : DRIVE BELT: _ 6204MC Gates _ V Type 3/8 inch belt, 620mm.
V1, __, __ : PULLEY: _ SPA V-Pulleys, 1/2, (SPA 63x1 & SPA 50x1).
----------------------------------------------------------------------------------------------------------------------------------------------
Version 3 costings as follows:
€18.00c 1 x DRIVE SHAFT (Material only x 1.5 meters).
€24.00c 2 x PILLOW BLOCK BEARING.
€145.00c 1 x LEE APP PRESS.
€55.00c 1 x LEE PRESS ATTACHMENT.
€1.00c 1 x NEW SPRING
€8.00c Estimated price for 1 reamer bit, depending make and dimension.
€40.00c 1 x MAIN STEEL FRAME, including bending at workshop.
€10.00c 2 x PRESS SUPPORT PLATE 3/8 & 1/8 plates.
€160.00c 1 x DRIVE MOTOR.
€45.00c 1 x MOTOR STARTER.
€9.00c 1 x DRIVE BELT
€30.00c 2 x PULLEYS: 100x1 & 43x1
€15.00c 1 x LOT of Bolts, nuts, washers, spring washers, wire, cable ties.
€45.00c 1 x LOT of sliders, hinges, paint, wall plug, enclosure box, Perspex.
€605.00c ➡ SUBTOTAL
€30.00c Engineering work for 1 main drive shaft and 1 small drive shafts.
€120.00c Engineering work for 1 main drive shaft and 6 small drive shafts. (Spare)
€150.00c ➡ SUBTOTAL
€755.00c ➡ GRAND TOTAL.
----------------------------------------------------------------------------------------------------------------------------------------------
#reloadingandmore,
#reloadingandmore1966,
#LeeApp,
#reloading,
#45acp
Very cool !!! Maybe you add some FESTO pneumatics to push the lever and you're fully automated and ready for 24/7 operations.
Good morning and thanks for stopping by Matthias👍🥇. At some point we considered using pneumatics but we gave it up. No real reason but at the time it looked like manual operation will do. Take care and have a great weekend☀☀
That is an amazingly simple solution using mostly* off the shelf components! Great work. Thank you for posting this up!!!
Good afternoon and thanks so much for stopping by👍👍. I am glad you like this one. it was a challenging project but came out pretty good. Take a look at the other clip for this press. it is shorter and in 4K. It focuses more on the actual work rather than the fabrication. Here is the link. Take care and have a great week. ua-cam.com/video/ODMnQtjYKm8/v-deo.html
This is a brilliant idea!! But from my experience I've only needed to ream 223 brass cases because most of them are crimped. I may be mistaken.
Thanks for stopping by the channel Erik👍. Several 45ACP have been giving problems so just processed the complete lot. The crimp is not as visible as that of a 308. Great results overall with no issues in priming when running the automated press.
Take care and have a great day
You built an excellent machine 👍👍👍
Thanks Glad you like this. It has been a great project and the owner is very happy with the Results. Take care and thanks for your comment.
WoW!!! That's using your head.... GREAT video..
Glad you like this one Michael. It was so nice to build it. Thanks for looking at the content. Have a great day and please feel free to share this and other clips. 👍
Bravo. Definitely subbed to your channel.
Thanks so much for the sub. I am glad you like this one. It was a very nice project and the results are extraordinarily good. Have a look around the channel. There are a couple of clips about a .44 Magnum Taurus you might like. From your channel logo, it looks like you are a .44 Magnum enthusiast. Take care 👍👍👍👍
Wow that’s really cool.
Thanks. it was a nice project and the results are fantastic. Take care.
Excellent!
Thanks Mike. I appreciate your continued support. Take care.
Just like Tim Allen on Home Improvement LMAO!!!
Good afternoon Richard and thanks for stopping by🙏👍. This was a great project to work on. Have a great evening.
Good deal 👍🍻
This one here has saved us so much time when it comes to case conditioning. Thanks for stopping by. Take care and have a great weekend.
Complimenti per l'ingegno e la realizzazione, veramente un ottimo lavoro, la app sara presto mia
Grazie Franco. Questa pressa e eccezionale. 👍👍
If you don't mind me asking, are you an engineer or machinist? You seem to have no issues designing and executing these high tech tasks
Hi Jeff. Noting of that sort. My background is in telecom and search & rescue. I just get inventive and normally very practical. When I put my mind on something it is always with relentless determination and will not give up until I get its done. Take care my friend.
Love the design! If I may ask why didn't you just mount the motor with a Jacob's style or quick change chuck on it to the plate and use it in a direct drive configuration? That is what I was thinking about doing, I am no engineer so I don't know if my idea would work or not?
Good afternoon and thanks for stopping by the channel Bama👍🙏. Let me start by saying that I am also not an engineer but somehow things tend to work. We had several ideas but your system I did not think of honestly. We wanted to get a system that can operate for say 1hr without any issue, that we could adjust the speed in some form or another, also adjust the torque, and also that we could have ways of replacing parts, mostly the bit if need be. In a few weeks I have a new clip coming out on this one since it has now worked over 35,000 cases. Also added a small modification but nothing special. Take a look at the description of this video to see all items used. Stick around for the next clip on this.
Take care and have a great day.
Hats off! Amazing work and sub’d. Curious, not factoring in a cost for your time and ingenuity, what did v3 cost you total in parts? Different threaded reamers for various size primer pockets, correct? Once again, amazing work and thanks for taking the time to document it so well and for uploading it for the community.
Thanks for the sub and nice comment. The reamers needed are two, one being for large primers and the other for small. The thread is the same on both.
Within 24 hrs I will update the description with a price list. Take care. 👍 👍
@@ReloadingMoreAD1966 thank you!