You said that if primary superheater temperature increased due to furnace temprature increasing first of all primary superheater installed after final superheater means it is getting heat after giving to final superheater so how FSH will increase temperature there might be one chance that incase of given chance as three superheaters including wingwall if after PSH attemperation fails then before FSH will recover.
Natural cooling process in boiler and force cooling boiler process explain kariye, and what is basic funda of drum metal temperature and feedwater temperature
सर हमारे बॉयलर का वर्किंग प्रेशर 10.54/cm2 है और कट आऊट होता है 7.5kg/cm2 से 8.5kg/cm2 पे तो उसका सेफ्टी वाल्व दोनो कितने कितने पे सेट होगा प्लीज सर रिप्लाई कीजिएगा
Sir, If steam temperatures increases in the primary and secondary superheaters then Steam pressure also increases OR not. Please explain as temperatures and pressure readings at different locations. Thank you
Dear this phenomenon happening in close cycle, but boiler tube behaves like open cycle and also know boiler heat addition on Isobaric means pressure remain constant in whole heating process, so only temperature increases pressure remain constant.
@@PowerPlantDiscussion Sir, But I have observed pressure and temperature increases and decreases as per fuel firing rate and load on the boiler. So please I request explain, if boiler process isobaric then during light up how pressure build up and maintained. Also during normal running if due to any fault pressure dropped then how increases pressure up to the normal range. Also sir, I want to confirm with you that in all zones of Boiler, pressure values are same OR different pressure readings from downcomer headers, Riser headers, Steam drum, PSH, SSH, main steam line etc. I requestyou for explaining confusions. Thank you
Koi v fuel ho dear, uska ultimate analysis ka report se ap theoretical air calculate kr lo pahle, then 30% excess air add kr do, fir dono me compare kr lo. Waise theoretical air calculation pr already video upload h ap dekh skte h.
Lt or ht attemp. Max flow 10 tph (1 spray) boiler ka design temp 545°c 107bar 260 tph or fw temp 160°c to maximum kitna temp down kr sakta h attemp, k throw on full load
![WHAT IS BOILER || Boiler According to IBR || TYPES OF BOILER || [हिंदी]](http://i.ytimg.com/vi/HX-OVrkeFyw/mqdefault.jpg)
Great knowledge very useful and understandable
Sir synchronisation of turbine ke pure process per ek video banaiye 🙏
Sure dear
specially for 500MW unit
@@f4life-l3v yes
Good information sir.....
Most informative topic and too good presentation, Sir 👌
Very useful information ❤
Superb Video Sir.... 👍
Good explanation
Love from Pakistan sir.
BAHUT ASSA JI 🙏🙏 EXCELLENT
Aap bahot accha batatate hai
Good Information sir
Super sir ji 🙏
Very Informative Video
Very beautiful video sir
Most important topic sir
Thanks sir..
Sir control Bal aur motorised Bal mein kaun sa first kam karta hai sar is per video bnao please
Fcc indmax unit ke upaar video banaye , riser reactor regenerator ke upaar
Thank u sir
Thanku sir
BCP pe ek Detail video bana dijiye Please..
Sir.feed pump ke uper ARC valve bypass kese malum padega aur arc ka working principle
please make a video over water tube and super heater tube metallurgy. and how steam get superheated in superheater(what phenomenon takes place)
Sir please Boiler ki sari interlocking ki vedio banayga ji
You said that if primary superheater temperature increased due to furnace temprature increasing first of all primary superheater installed after final superheater means it is getting heat after giving to final superheater so how FSH will increase temperature there might be one chance that incase of given chance as three superheaters including wingwall if after PSH attemperation fails then before FSH will recover.
gas turbine and HRSG Pr bhi videos banaye chandan sir
Natural cooling process in boiler and force cooling boiler process explain kariye, and what is basic funda of drum metal temperature and feedwater temperature
Sir sweeling and shrinkage drum kya hota hai boliye??
Thanks sir
Very informative video sir ☺️
Dew point kanha pe banta hai boiler mein sir eske baare mein bhi video banaiyega sir
Wet scrubber ke operation ke upar video banaiye sir🙏
Sure dear
Please make video TURBINE HMBD
🔥🔥❤️❤️👏👏
Sir ek app ke bare mai QNA video ho jaye 😍😍
Sir please discuss on recirculation opening and closing process of TDBFP in 500 MW
As we know after drum saturated steam goes to LTSH and then to PSH. So spray should be between LTSH and PSH?
सर हमारे बॉयलर का वर्किंग प्रेशर
10.54/cm2 है और कट आऊट होता है
7.5kg/cm2 से 8.5kg/cm2 पे
तो उसका सेफ्टी वाल्व दोनो कितने कितने पे सेट होगा प्लीज सर रिप्लाई कीजिएगा
Steem drum ka temperature kaise calculate kare
Next video on this topic
R/Sir
Plz Travelling Grade Boiler ki efficiency par video banao
Sie muze BOE ke liye prepare krna hai lease BOE ke regarding Videos bnaye.
Ape previous videos bhi kafffi helpful hai.
Sara video usi ke related h dear.
Turbine Me balancing line kyu di jati ? Please sir iss Pr video banaye....
Sir... Kya ESP me chemical dosing hoti hai
Cfbc boiler function full video banayie sir🙏🙏
Sir ap boiler ka lecture pr puri video banaiye ya class dijiye
Sir me apka bhot bada fan hu I love you sir ❤️
Thank you so much dear love you too
OMG sir Apne Mera Reply Kiya wow m so lucky sir plzz give me ur Instagram account I'll follow you sir plzz ❤️ 😘🥰
And please give me ur contact number also sir me promise krta hu me apko kbhi prsan nhi karunga plzzz de do sir
@@raftaargaming9851 Pata nahi log ye sab harkat kyu karte he fan kyu ban na he re tujhe teacher he wo koi actor nahi padh le
Sir steam and brine se ham kisi material ka jayada se jayada or kam se kam kitna temperature le ja sakte h
Sir DA 100% line 30%line kya he or DA bypass ka kya work kya he
In bed super heater coils rahega tho ssh ka baadh atempration karsaktha hai naa sir
Understood , importance / significantion of proximate & ultimate analysis of coal var video banava, I am waiting.
Sure
Sir one BOE vviva ka ek vedio banado Sir plz in details Sir
Sir,
If steam temperatures increases in the primary and secondary superheaters then Steam pressure also increases OR not.
Please explain as temperatures and pressure readings at different locations.
Thank you
Dear this phenomenon happening in close cycle, but boiler tube behaves like open cycle and also know boiler heat addition on Isobaric means pressure remain constant in whole heating process, so only temperature increases pressure remain constant.
@@PowerPlantDiscussion
Sir,
But I have observed pressure and temperature increases and decreases as per fuel firing rate and load on the boiler.
So please I request explain, if boiler process isobaric then during light up how pressure build up and maintained.
Also during normal running if due to any fault pressure dropped then how increases pressure up to the normal range.
Also sir, I want to confirm with you that in all zones of Boiler, pressure values are same OR different pressure readings from downcomer headers, Riser headers, Steam drum, PSH, SSH, main steam line etc.
I requestyou for explaining confusions.
Thank you
Some doubt hai mujhe
@@sanjaynarware6536
Kya doubt hai?
boiler load depends on fuel, air
While lighting up boiler main steam v/v is in close condition pressure will increase
Sir ji heater ko 500 MW lode pr kiyu charge nahi karte
DM plant ke bare me video bnaye
Please check my playlist of DMP
Sir lignite coal ko burn karne k liye zayda air kyu cunsume hota hai is pe video banaiye
Koi v fuel ho dear, uska ultimate analysis ka report se ap theoretical air calculate kr lo pahle, then 30% excess air add kr do, fir dono me compare kr lo. Waise theoretical air calculation pr already video upload h ap dekh skte h.
Why gauge glass charge by steam please sir video banaye.
Lt or ht attemp. Max flow 10 tph (1 spray) boiler ka design temp 545°c 107bar 260 tph or fw temp 160°c to maximum kitna temp down kr sakta h attemp, k throw on full load
Sir, why do we always measure the pressure of boiler in kg/cm² or pounds?
there is a difference between a desuperheater and an attempter?
Sir pls give solution for Karnataka BOE 2022 exam
Mere plant me ss2 k bad tcv h
480-305=175
Sir ji please check
600mw ka attempration
whrb boiler video
Sir deemag ka maa behen ho gaya 🤣🤣🤣. Or mehenat kar ni padegi☹️☹️
Explain lOI
You should understand that time and bandwidth costs money. Don't unnecessarily stretch video to generate Ad revenue. Else people will stop watching.
M always trying my best in short duration,
Not complete satisfied answer
Thank you sir
Thank you sir