Have you ever tried the Parkside PAGHS 20-Li A1cordless pruning chain saw? I would like to ask how often the saw chain gets loose when you use it? How often do you need to tighten the saw chain? Is it possible if you tighten the mounting screw very tight the saw chain will not be loosened after that?
The other modification I would and will do, is replace the black plastic pulley (9:45), with an aluminium one cause it looks to me that the flimsy plastic pulley rubbing against the metal cogs of the oil pump, will degrade very quickly.
In my B2 (although I don't know if it has the same IAN number as yours) this washer on the sprocket does not have a completely round hole. It is round at the ends and with extended sides. It fits onto the end of the motor shaft and rotates with it. The chain doesn't fall off that easily. Although the quality/hardness of the metal is equally poor. BTW, do you know where to get this integrated electronic module? The Chinese have something similar, like the one for an angle grinder that you replaced in one of your videos?
Mine through off the chain on sideways cutting. The retention clip went off and so did the washer of the chain. Couldn't find the clip on the soil so I stopped that day and replaced the clip and washer on another day. Working great ever since. Saw managed even a bigger chain. It's powerful enough.
This is the second case, the first was with a friend who had bought a new one and was constantly throwing a chain, and we improved his in the same way.
@@ErCanEverythingYou executed that well. I have done a similar ''motor angle alteration'' on a cordless bandsaw from Makita. The bandsaw was droping the blade and yeah, washers to the rescue.
Do you know how to disable the soft start on this saw? Maybe there is a chance to disable it with connecting the wires differently. The soft start is so horrible on this saw. Almost everyone don't likes the soft start which I spoken with.
@@ErCanEverything I understand, but you have to understand if you cut a lot the soft start is really annoying and takes much time, because you have to wait every time s couple seconds until the same has full revolutions.
@@VitorMadeira Good luck with soft start when you are in the woods and you want to finish cutting the wood as fast as possible. Work time is more expensive. Is your time nothing worth for you? Sometimes I don't understand people. This isn't a saw for thousand's of dollars. Priority is finish the work.
@@hanf022 Parkside tools are not intended for professional use. It's a supermarket brand (Lidl) intended for end users in their spare time hobby, so they prepare those machines to be light and cheap and they say it in the users manual. Slow and home made work. Have a good life.
This is second hand but a friend had bought a new one B2 version which had the same problem. But my first one was an A1 I was very happy which I sold it. I don't know if the performance series have a same problem, and it could be due to a very tight chain I do not know🤷
@@ErCanEverything Chain tension problem is like on b2 gasoline version-sprocket that runs the chain isnt concentric.Or the sprocket on the chain guard isnt concentric .So one part of chain is loose and other is super tight. Quality control is crap on parkside tools.
In my B2 (although I don't know if it has the same IAN number as yours) this washer on the sprocket does not have a completely round hole. It is round at the ends and with extended sides. It fits onto the end of the motor shaft and rotates with it. The chain doesn't fall off that easily. Although the quality/hardness of the metal is equally poor. BTW, do you know where to get this integrated electronic module? The Chinese have something similar, like the one for an angle grinder that you replaced in one of your videos?
Здравей, приятелю. просто трябваше да смениш шайбата с такава на "stihl" + зегер шайба и проблема е решен. Отдавна съм постигнал това работещо решение. поздрави
Нали знаеш, винаги избирам по трудното и понеже ме мързи да ходя до града заради 1 шайба. Но ако беше в съботен ден когато имаше битак, със сигурност още сутринта щях да съм там🤣
@@ErCanEverything it is poor design of early models, maybe they fixed the problem in the most recent version? (it is still sold in these days at the lidl supermaket)
You're ingenious and talented, but first of all how can they sell this kind of tool as everyone know that problem ? And this is not the only tool concerned by my own experience (in France) with this brand, fortunaly just buy a few and stop. More of that, with a chainsaw it's rather dangerous for users. I have a thermic Husqvarna 61 from mid 90' heavy and not modern, but still running well more than 30 years later just with a good maintenance.
Nu este corect stimate coleg trebuie adus motorul may in fața sa circule lanțul pe mijlocul de acționare al ghidajului cu lama liniar cred nu ai pus doua șaibe și ai înclinat ghidajul in timp se strica altceva nu tine rezolvate incorecta îmi pare Rau de comentariu
YOU ARE A PERFECT PROFESSIONAL! YOU EVERY HAND MOVEMENT FOOL OF GRACE AND PERFECTION! I AM IN AMAZEMENT!
I can tell how much you love your tools, bro.
Mad respect for you👍🏼
🙏🙂🤝🤝🤝
Very, VERY good!
I have the very same machine and this video is quite precious for me.
Thank you and greetings from Portugal.
KUDOS majstore. Parkside should hire you as a consultant and PR guy, seriously
🤣🙂🤝
Have you ever tried the Parkside PAGHS 20-Li A1cordless pruning chain saw? I would like to ask how often the saw chain gets loose when you use it? How often do you need to tighten the saw chain? Is it possible if you tighten the mounting screw very tight the saw chain will not be loosened after that?
The other modification I would and will do, is replace the black plastic pulley (9:45), with an aluminium one cause it looks to me that the flimsy plastic pulley rubbing against the metal cogs of the oil pump, will degrade very quickly.
In my B2 (although I don't know if it has the same IAN number as yours) this washer on the sprocket does not have a completely round hole. It is round at the ends and with extended sides. It fits onto the end of the motor shaft and rotates with it. The chain doesn't fall off that easily. Although the quality/hardness of the metal is equally poor. BTW, do you know where to get this integrated electronic module? The Chinese have something similar, like the one for an angle grinder that you replaced in one of your videos?
Well done my friend to your constant tenacity and ingenuity. Best regards
Thank you for the kind words my Friend🙏🙂🤝
11:22 What grease or vaseline you use?
Mine through off the chain on sideways cutting. The retention clip went off and so did the washer of the chain. Couldn't find the clip on the soil so I stopped that day and replaced the clip and washer on another day. Working great ever since. Saw managed even a bigger chain. It's powerful enough.
This is the second case, the first was with a friend who had bought a new one and was constantly throwing a chain, and we improved his in the same way.
@@ErCanEverythingYou executed that well. I have done a similar ''motor angle alteration'' on a cordless bandsaw from Makita. The bandsaw was droping the blade and yeah, washers to the rescue.
Good job again 🤗
Thank you my Friend🙂🤝
Do you know how to disable the soft start on this saw?
Maybe there is a chance to disable it with connecting the wires differently.
The soft start is so horrible on this saw.
Almost everyone don't likes the soft start which I spoken with.
I haven't bothered with this because I don't mind the feature🤷
@@ErCanEverything
I understand, but you have to understand if you cut a lot the soft start is really annoying and takes much time, because you have to wait every time s couple seconds until the same has full revolutions.
Soft start helps increase batttery life and prevents premature hardware wear.
@@VitorMadeira
Good luck with soft start when you are in the woods and you want to finish cutting the wood as fast as possible.
Work time is more expensive.
Is your time nothing worth for you?
Sometimes I don't understand people.
This isn't a saw for thousand's of dollars.
Priority is finish the work.
@@hanf022 Parkside tools are not intended for professional use.
It's a supermarket brand (Lidl) intended for end users in their spare time hobby, so they prepare those machines to be light and cheap and they say it in the users manual.
Slow and home made work.
Have a good life.
I was considering buying the performance....not sure anymore...video 🔝🔝🔝
This is second hand but a friend had bought a new one B2 version which had the same problem. But my first one was an A1 I was very happy which I sold it. I don't know if the performance series have a same problem, and it could be due to a very tight chain I do not know🤷
@@ErCanEverything Chain tension problem is like on b2 gasoline version-sprocket that runs the chain isnt concentric.Or the sprocket on the chain guard isnt concentric .So one part of chain is loose and other is super tight.
Quality control is crap on parkside tools.
In my B2 (although I don't know if it has the same IAN number as yours) this washer on the sprocket does not have a completely round hole. It is round at the ends and with extended sides. It fits onto the end of the motor shaft and rotates with it. The chain doesn't fall off that easily. Although the quality/hardness of the metal is equally poor. BTW, do you know where to get this integrated electronic module? The Chinese have something similar, like the one for an angle grinder that you replaced in one of your videos?
Здравей, приятелю. просто трябваше да смениш шайбата с такава на "stihl" + зегер шайба и проблема е решен. Отдавна съм постигнал това работещо решение. поздрави
Нали знаеш, винаги избирам по трудното и понеже ме мързи да ходя до града заради 1 шайба. Но ако беше в съботен ден когато имаше битак, със сигурност още сутринта щях да съм там🤣
Благодаря за коментара. Те универсални ли са?
Muy bueno. Muchas gracias por compartir tu ingenio
Ciao ti posso chiedere che tipo di grasso hai usato
Quello è grasso al silicone.
Hey, what kind of grease do you use?
great idea how to fix it ,and thanks for the educational video !
Habe selber 2 parkside Akku ketten Sägen bin von beiden Maschinen begeistert und die machen viel an holz
It was already yoo lose when you started
I both one new, performance 40V, but had the same problem after using it just ones
Bravo komşu
Teşekkürler komşu🙂
Sip dahh you creative
😃👍👍👍👍
👍👋👋❤️
Like Parkside do this kind of stuff on purpose 🤔
I think they pay less for quality control🤷
And much more for Arnold😅
@@ErCanEverything 😂🤣😅
@@ErCanEverything it is poor design of early models, maybe they fixed the problem in the most recent version? (it is still sold in these days at the lidl supermaket)
You're ingenious and talented, but first of all how can they sell this kind of tool as everyone know that problem ?
And this is not the only tool concerned by my own experience (in France) with this brand, fortunaly just buy a few and stop.
More of that, with a chainsaw it's rather dangerous for users.
I have a thermic Husqvarna 61 from mid 90' heavy and not modern, but still running well more than 30 years later just with a good maintenance.
A stronger spring could solve it to right?, Why not just buy a thicker ring 😁But the wouldn't be a youtube video
👍👏👏
Nu este corect stimate coleg trebuie adus motorul may in fața sa circule lanțul pe mijlocul de acționare al ghidajului cu lama liniar cred nu ai pus doua șaibe și ai înclinat ghidajul in timp se strica altceva nu tine rezolvate incorecta îmi pare Rau de comentariu
Én a 10 forintos érmét szoktam áfúrni
🪚🪚🪚🪚🪓🪓🪓🪓
quei giocattoli ti faranno inpazzire!!
Ellerinize sağlık.Linkini paylaştığın uygulamanın birde sizin tarafınızdan yapılmasını sabırsızlıkla bekliyorum.🙏🏻 ua-cam.com/video/NclXQVWa9k8/v-deo.htmlsi=EzPIOEDPgJgXa_56
Teşekkür ederim. İnşallah buna benzer 1 tane ben de yaparım🙂
Man look at those cheap plastics. It's terrible.
Das Problem ist der Parkside Schrott.
First
o marka o kadar kötü malzeme..cin usulu😂😂😂😂😂
Türk müsün
Per forza è un giocattolo