⚡️Link to The Moonas Magica E-Book on Creating Tensor Technology : moonasmagica.com/ebook-on-tensor-technology 💫Link to Shop: moonasmagica.com/lightshop
Hey, great video tutorial, you're super awesome! I just wanted to let you know that the etsy link in your description right after "Link To The Light Shop To Aquire Technology from Moona Him Self:" goes to a blank/invalid page! Also I just realized while typing this that Acquire has a C in it (typo!) All the best, from BC 🍁
@@Justmichs Greetings Family! I would say at least a few Coils! No specific number but make sure you Coil around a few goes before Merging the ends together! 💕⚡️💕
Thanks for sharing. Do the wires on the coil need to be separated or can they touch? Also when the pendulum swings counter clockwise is that the positive end
@@ggss8647 must touch. Then the circuit is considered closed. I’m also not quite clear on pos neg output unless asking the pendulum, show me yes, pos, show me no, neg.
Hey Moona, I love your videos but you never seem to mention that the same end of the wire should meet itself and not the other wire when brazing. Slim Spurling emphasized this and this is what chatgpt says. "1. Same-End Alignment: The ends of the twisted wires should meet themselves (not cross over to the other wire) when soldered. This ensures the continuity of the energy field within the tensor ring, maintaining its coherent energy flow. 2. Why Same-Wire Connection is Effective: Proper alignment creates a closed-loop energy circuit, which is believed to enhance the tensor field's strength and effectiveness. Crossing the wires disrupts this energy circuit, potentially diminishing the ring's harmonizing properties." A good way to do this is to mark one wire with marker and the run your fingernail along the spiral to the other end and mark that end as well. I always do this a second time after marking both ends just to make sure.
@@thexylolyxeffect thank you for your input though :) although I assure you it is not necessary for The Tensor Technology to be Creating a Perfectly Flowing Energy Field!
⚡️Link to The Moonas Magica E-Book on Creating Tensor Technology : moonasmagica.com/ebook-on-tensor-technology
💫Link to Shop: moonasmagica.com/lightshop
A torus tensor awesome thank you
Thank you for showing how to do this. LOVE, LOVE, LOVE.❤❤
@@MaRyWiNs3 of course :) you are very welcome always
thank you beautiful being
thank you Moonas for all that you do! Does the direction the coil is wrapped around the pipe or tube make a difference in effectiveness?
Hey, great video tutorial, you're super awesome! I just wanted to let you know that the etsy link in your description right after "Link To The Light Shop To Aquire Technology from Moona Him Self:" goes to a blank/invalid page! Also I just realized while typing this that Acquire has a C in it (typo!) All the best, from BC 🍁
@@NTayls80 woah! Okay thank you brother! Will fix that up! Love for The Awareness! All the Best Family
Dear moona thanks so much. Question does there need to be a specific amount of coils for our Torus tensor tubes please?
@@Justmichs Greetings Family! I would say at least a few Coils! No specific number but make sure you Coil around a few goes before Merging the ends together! 💕⚡️💕
@@MoonasMagica thank you for answering 👍🏻🌟👐
Thanks for sharing. Do the wires on the coil need to be separated or can they touch? Also when the pendulum swings counter clockwise is that the positive end
@@ggss8647 must touch. Then the circuit is considered closed. I’m also not quite clear on pos neg output unless asking the pendulum, show me yes, pos, show me no, neg.
@Justmichs I was curious about the actual spiral of the wire if each of the loops are touching or pulled apart. If it matters one way or another
@@ggss8647 I really don’t know. All of slims spurlings twisted wire touched and is always rotated in a clockwise direction upon twisting.
They must touch! And the pendulum is different for all beings, for Me the Positive is clockwise! You may have another Way 💗⚡️
Thank you for showing how to do this! Love, love, love.❤❤❤
Hey Moona, I love your videos but you never seem to mention that the same end of the wire should meet itself and not the other wire when brazing. Slim Spurling emphasized this and this is what chatgpt says.
"1. Same-End Alignment:
The ends of the twisted wires should meet themselves (not cross over to the other wire) when soldered.
This ensures the continuity of the energy field within the tensor ring, maintaining its coherent energy flow.
2. Why Same-Wire Connection is Effective:
Proper alignment creates a closed-loop energy circuit, which is believed to enhance the tensor field's strength and effectiveness.
Crossing the wires disrupts this energy circuit, potentially diminishing the ring's harmonizing properties."
A good way to do this is to mark one wire with marker and the run your fingernail along the spiral to the other end and mark that end as well. I always do this a second time after marking both ends just to make sure.
@@thexylolyxeffect it is not nessesary for the same end to meet on itself!
@@thexylolyxeffect thank you for your input though :) although I assure you it is not necessary for The Tensor Technology to be Creating a Perfectly Flowing Energy Field!