Restoration SVT-40 Soviet Bayonet Knife - WW2

Поділитися
Вставка
  • Опубліковано 24 вер 2024
  • Hello folks! Today I have a new restoration video for you. My friend asked me to restore the legendary SVT-40 bayonet knife from the Tokarev system. This item is from the era of the Second World War. The condition of the item is bad, but I will try to fix it. Well, I'm starting to restore the item!
    The first duty I began to disassemble the bayonet. I tried to remove the original canvas suspension as carefully as possible, it broke into two parts. But I'll decide that later.
    Next, I removed the plastic pads from the knife, because there were always wooden pads in the original. I put all the metal parts in a jar with a rust remover. I put the canvas suspension in a jar with hot water and laundry detergent.
    After a while, I took out the metal makers, including the scabbard, and placed them in a jar with warm water and soda to neutralize the acid. I cleaned the screws and nuts from the knife handle with a cord brush. The canvas suspension was washed and ironed. After that, I went to the seamstress to sew the suspension well. I leveled most of the dents on the steel scabbard with the help of homemade metal molds.
    The lock on the handle of the bayonet knife was also restored. I soldered the aspen part with a new one, and made a new nut and added a spring. It turned out to be a working lock. I also made new bayonet knife linings from beech wood. After all the work, I assembled the bayonet and showed it to you.
    I hope you enjoy this restoration! Thanks for your attention
    Sincerely, Alex. Thanks for attention!
    Good luck and health to everyone! With best wishes, Alex!
    Please subscribe to my channel: @ScrewsAndTools
    🍖 My New Cooking channel! @screwsandtoolscooking
    Patreon: / screwsandtools
    Paypal: paypal.me/screwsandtools
    Facebook: / scresandtools
    Instagram: / screwsandtools
    #screwsandtools #bayonet #restoration

КОМЕНТАРІ • 329

  • @Madlintelf
    @Madlintelf Рік тому +29

    I love that you keep the history of items instead of trying to just polish them up, watching this channel is never disappointing Alex!

  • @ericcartrette6118
    @ericcartrette6118 Рік тому +7

    You, Sir, are an artist! You have a sharp eye for detail, a great understanding of how to work around or overcome problems with a piece and you simply don't give up on things that most of us would have thrown out - such as that suspension strap. Great job as usual!

  • @condar419
    @condar419 Рік тому +3

    I love the respect you showed for the bayonet while restoring it. Keeping the fabric, not over-working the blade to keep the 'history', etc. Also, nice work on the wooden handle and the 'spring button thing'.

  • @robertryden8036
    @robertryden8036 Рік тому

    Once again, I am impressed. Instead of trying to make something look brand new, you bring out its naturally used beauty. I agree with replacing the plastic with wood as it was made. BRAVO!

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому +1

      Hi! Thank you for your attention. There was never plastic on the handle of this bayonet, it was done by someone who used it on the farm or in the village. The SVT-38 and SVT-40 models always had a tree on the handle.

  • @funnymoments6988
    @funnymoments6988 Рік тому +8

    Очень тематическое видео! Всех с праздником, я сразу пишу комментарии и иду спокойно смотреть видео. Спасибо ❤

  • @Кара76
    @Кара76 Рік тому +15

    Алекс молодец!!! Всё отлично сделал 👍👍👍 Старые вещи не нужно делать блестящими и сверкающими. Должен быть налёт времени.🤝👍

  • @ДмитрийКозуляк-и3ч

    Алекс Вы талантливый человек, штык получил вторую жизнь, жалко накладки поломались, успехов Вам и здоровья

    • @АлександрМахин-д2д
      @АлександрМахин-д2д Рік тому +2

      Не поломались, а он их жёстко сломал. Даже не попытался винты открутить. Горемастер.

    • @SandroBotichelli
      @SandroBotichelli 7 місяців тому +1

      @@vitaliychumak4158 не пластик, а текстолит, и он оригинальный

    • @SandroBotichelli
      @SandroBotichelli 7 місяців тому

      ​@@vitaliychumak4158как тебя? 😂

  • @louisaziz1235
    @louisaziz1235 Рік тому +2

    I'm always impressed with the quality of your work and the concern for the life and history of the piece that you are bringing back to life. I also admire your ingenuity and your use of whatever you have to complete your goal. And all of the little dents and scratches have a story to tell and give it some character. You never cease to impress me. Bravo!

  • @ВеликиеЛуки60
    @ВеликиеЛуки60 Рік тому +7

    Приветствую!!! Спасибо за проделанную работу и видео!!!💥💥💥 Поздравляю с праздником Великой победы!!! Здоровья, всех благ и мирного неба над головой!!!

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому +2

      Добрый день! С днем Победы! Взаимно, спасибо!

  • @TheUnclefester13
    @TheUnclefester13 Рік тому +1

    I loved those wooden handles. I watched another restoration channel over the weekend and died inside as the restorer destroyed the handle of a very old Asian blade. It made me appreciate your work even more. Be safe sir.

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому

      Hi! Thanks for attention. I removed the plastic ones, because plastic has never been used in the SVT-38 and SVT-40 models.

  • @andyc750
    @andyc750 Рік тому

    that blade has had a very hard life and has a story to show, and you preserved and added to that story, really nice piece of work

  • @alexred8424
    @alexred8424 Рік тому +4

    Я может чего то не понимаю в этой жизни, но зачем нужно было уничтожать нормальную целую ручку (накладки) судя по всему из какого то олдового пластика (бакелита). И при этом спасать прогнивший кусок брезента???

    • @ДанилаБагров-к7ц
      @ДанилаБагров-к7ц Рік тому

      Согласен на все 100 !!!

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому +1

      Потому что в модели СВТ-38 или СВТ-40 никогда в жизни не устанавливались ручки из пластика. Всегда было дерево. А поменять старый на брезентовый подвес на другой это легче всего по сути любой справится, а я не ищу легких путей.

    • @alexeygrebennik8877
      @alexeygrebennik8877 Рік тому

      ​@@ScrewsAndTools ну здесь же были, значит устанавливались

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому +1

      @@alexeygrebennik8877 Это было сделано обычным человеком, поверьте перед тем как приступить реставрации я и книгу открыл (благо есть) и настоящий СВТ-40 в руках подержал. Видно же штык использовался как утилитарный предмет. Это обычное дело было после первой и второй мировой войны.

  • @АлексейБирюков-ф5л

    Алекс, Вы выглядите браво! Спасибо!

  • @tezikoff
    @tezikoff Рік тому +1

    Я конечно не очень разбираюсь в эволюции штык-ножей разных моделей, но этот похоже больше нож, чем штык.И похоже судя по сточенному лезвию, хорошо послужил в этом качестве.Спасибо что сохраняете следы времени при реставрации!

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому +1

      Такая судьба часто находить штык ножи, сломанные шашки, бебуты, кинжалы и т.д.

  • @ryanmedina5090
    @ryanmedina5090 Рік тому

    That bayonette was a mess but you worked your magic on it. That restoration was an amazing transformation with showing respect to the history. That knife looks like its seen a lot and was well used. You tell us an amazing story as you peel away the dirt, grime, and rust to reveal the history below.

  • @MrGeroth
    @MrGeroth Рік тому

    Your workmanship is excellent and you keep the items authentic. Thanks for sharing. 👍👍👍👍👍

  • @stanleycarlock5624
    @stanleycarlock5624 Рік тому

    Was that your lovely grandma's hand I see sewing the webbing for you? God bless you for letting her help you with this great restoration project!

  • @annettemalaski1967
    @annettemalaski1967 Рік тому

    I hope the knifes new owner will treat it with pride!

  • @maxim_izhevsk
    @maxim_izhevsk Рік тому

    Здравствуйте Алекс, спасибо и с праздником Великой Победы, ура🎉

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому

      С праздником вас! Спасибо за внимание

  • @davidmorris4353
    @davidmorris4353 Рік тому

    I have been with you from the beginning. The increase and your skills in all regards has increased and now you have attained the touch of a Master! Bravo Alex! I say again. . .BRAVO! I salute you! Greetings and best regards from West Texas USA!

  • @TheTrueBobDole
    @TheTrueBobDole 8 місяців тому

    I have 3 antique bayonets in my collection. They're an interesting item. Many nations have their own types, but sometimes have similar if not identical types 😯 Watching you fix the button mechanism was very enlightening. All mine still work, but I always wondered how they were put together.

  • @observer0395
    @observer0395 Рік тому +1

    16:20 второй лайк за русскую речь),а то всё инглиш да инглиш)

  • @bodiejay2859
    @bodiejay2859 Рік тому +1

    You are an amazing talented man. You are a true craftsman. I love to watch you restore such things as this. Great work. ~Kevin

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому

      Kevin greetings !Thank you for attetnion and interest.

  • @oleg_konovalov
    @oleg_konovalov Рік тому +2

    Отличная работа! 👍 Жаль что клинок сильно сточен, но тут ничего не поделаешь... Зато реставрация как раз для музея. И да, видео о реставрации советского штык-ножа, как раз к 9 Мая! С Днём Победы, Алекс!

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому +1

      Спасибо за интерес и внимание! С днем Победы!

    • @oleg_konovalov
      @oleg_konovalov Рік тому

      @@ScrewsAndTools 🤝

  • @mansell9543
    @mansell9543 Рік тому

    Is there anything you can’t do? Every video you post you are always pushing to do more and to do it better than the last one. Excellent work!

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому +1

      I love what I do and I try to learn. Thanks for the feedback

  • @richq11
    @richq11 Рік тому

    Outstanding!!! I was amazed you were able to do anything with that old webbing.

  • @GSG-ed1xj
    @GSG-ed1xj Рік тому

    Хорошая реставрация, сохранено максимум оригинальности, единственное дерево рукояти немного бы состарить для аутентичности, в остальном все круто👍🏿

  • @ЖеняЛазерсон
    @ЖеняЛазерсон Рік тому +2

    Алекс как всегда очень круто!!! Особенно порадовал оригенальный ремешок👍👍👍👍

  • @Sergei......
    @Sergei...... Рік тому +1

    Нет возможности поставить более одного лайка. Классная работа!

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому

      Благодарю! С праздником

    • @Sergei......
      @Sergei...... Рік тому

      @@ScrewsAndTools С праздником!

  • @РусланХабибов-ф9р

    Алекс😮 Востановление очень понравилось, Штык еож проучил вторую жизнь. И с праздником Великой Победы🏆

  • @nekto_izvestniy
    @nekto_izvestniy Рік тому +2

    Шикарная работа. Впрочем, как всегда.

  • @ryanmcgrath339
    @ryanmcgrath339 Рік тому

    Brilliant job restoring this bayonet you brought it back to life. Thanks for the video upload bro BEEP BEEP

  • @MASI_forging
    @MASI_forging Рік тому

    Another gorgeous creative 😃😃

  • @خالدالبيومي-ظ1ز

    So beautiful indeed!
    Thank you 🙏🏼

  • @mariusz8771
    @mariusz8771 Рік тому +1

    Oglądam Twoje filmy,i muszę przyznać masz talent i pasje oraz zamiłowanie do "starych"rzeczy,rzadko to się teraz spotyka,robisz bardzo ciekawe filmy,nie przestawaj.
    Bardzo serdecznie Cię pozdrawiam,zdrowia życzę.

  • @razorboyXVII
    @razorboyXVII Рік тому

    Fantastic restoration my friend. Beep Beep!

  • @Алексей-Майкоп

    Клеймо звезда Тульский оружейный завод. Должно быть кольцо на штыке, жаль утрачено. Хорошая работа однако🙂

  • @stephenbridges2791
    @stephenbridges2791 Рік тому

    Nice job. I liked the sewing of the old strap.

  • @axelwulf6220
    @axelwulf6220 Рік тому

    Didn't expect to see Ol' Glory in one of your videos

  • @mikhailaivazov
    @mikhailaivazov Рік тому

    от товарища Михаила личный респект )))

  • @billsummy2412
    @billsummy2412 Рік тому

    I would love to hear the stories that knife could tell ... GREAT video pard

    • @davidvarnes7708
      @davidvarnes7708 Рік тому

      I always see stuff like this, but I always think that the reality is, the knife's tale would be 'Well, I got carried around doing very little for three or four years, and then was given to an old lady who used me as a butcher's knife for fifty or so years... I've seen some meat, let me tell you."

  • @Alex27krsn
    @Alex27krsn Рік тому +1

    Классная работа.

  • @vinceianni4026
    @vinceianni4026 Рік тому

    Good job mister Screws beautifully restored

  • @renatovieira8139
    @renatovieira8139 Рік тому +2

    First Brazil 🇧🇷

  • @PerfectRestore
    @PerfectRestore Рік тому

    Interesting version!!! Great !!!

  • @geraldstamour1312
    @geraldstamour1312 7 місяців тому

    Dope AF results, @ScrewsAndTools!

  • @armorer94
    @armorer94 Рік тому +1

    Not really one for historical conservation, are you? Is it possible that the plastic grips were added at a re-arsenaling?

  • @carrestore
    @carrestore Рік тому

    Beautiful Bayonet Knife

  • @namkumureronat1496
    @namkumureronat1496 Рік тому

    İyi bir çalışma.. İşe yarar bir kasatura oldu..

  • @ih8music
    @ih8music Рік тому

    Nicely done! I was confused at first when you were fabricating those pieces which turned out to be the catch button. But you made it look like an authentic replacement (to my untrained eyes, at least)!

  • @ЯнХиневич
    @ЯнХиневич Рік тому +1

    Сохран конечно огонь . Да и видно что нож использовали интенсивно.

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому +2

      Как бывает после войны - штыки, шашки, бебуты используются как утилитарный предмет.

  • @URMAN_STEPA
    @URMAN_STEPA Рік тому

    Молодец ! Большое спасибо !

  • @aleksandrspiridonov7151
    @aleksandrspiridonov7151 Рік тому

    Браво!

  • @armandoarturorosabalsanche7173

    Well done, my friend, from Bayamo, Cuba

  • @PolinaS-gq1te
    @PolinaS-gq1te Рік тому +1

    Шедевр! Нет слов👏👏👏👏

  • @johnday8771
    @johnday8771 Рік тому

    Great job again. I own an SVT-40 but it did not have the bayonet with it. They are hard to find and rather expensive. I need to pay the price and get one to make my rifle complete.

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому

      Hi! It's great to have svt. I wish you to get a new bayonet to your rifle as soon as possible.

  • @ЕгорГарбуз-м7я
    @ЕгорГарбуз-м7я Рік тому

    Как всегда правильный подход, лучше сохранить родные винты чем накладки.
    С Праздником, взаимно!

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому +1

      Пишу в 14-ый раз. Накладки у СВТ-38 и СВТ-40 всегда были из дерева. И вас с днем победы

    • @ЕгорГарбуз-м7я
      @ЕгорГарбуз-м7я Рік тому

      @@ScrewsAndTools Без всякой иронии об этом и говорю. Лучше сохранить возможно родные винты и не срывать шлиц. Чем однозначно неродные пластиковые накладки.

  • @ВалерийТотенкопф-с7м

    Всё отлично получилось. Подвес хоть и оригинальный, но можно было бы заменить на застаренный, брезентовый ремень. Клинок был когда-то свиноколом и правильно, что не стали его усовершенствовать. Рукоятки деревянные, как и должны быть. 👍

  • @TheVeronaus
    @TheVeronaus Рік тому

    Amazing work, i love that👏🏻👏🏻💯

  • @tomswindler64
    @tomswindler64 Рік тому

    As always impressive,brought back a piece of history.your the man.kudos 👍👍👍😎😎😎🗡

  • @jericcocross
    @jericcocross Рік тому +1

    На счёт ножен можно было водой и в морозилку. Расперло было вмятину. Я, так флягу востонавливал.

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому

      Фляга возможно ваша была из дюраль алюминия, а тут сталь я не стал пробовать.

  • @MrCrowski
    @MrCrowski Рік тому

    big like from me! great work!

  • @yurydyukov372
    @yurydyukov372 Рік тому

    Такая бережная работа! Снимаю шляпу!👍👍👍👏👏👏

  • @curtispina2706
    @curtispina2706 Рік тому

    Keeping it real and done perfectly 👌

  • @Iron_61
    @Iron_61 Рік тому

    Сначала подумал, ну тут вряд ли, что сделаешь. Но ошибся, ты всё таки сделал, как надо!

  • @res_dkt
    @res_dkt 10 місяців тому +1

    1:00 Looks like you won't need to make a new sheath for this knife

  • @riccisamurai
    @riccisamurai Рік тому

    excellent job

  • @1954JDR
    @1954JDR Рік тому

    Perfect restoration.👏👏👏

  • @hbhfdvhj1753
    @hbhfdvhj1753 Рік тому

    تحياتي لك عمل جيد

  • @tnxstaff
    @tnxstaff Рік тому

    MASTERPIECE!

  • @darekstajkowski9996
    @darekstajkowski9996 Рік тому

    Zniszczyć orginalne okładki a odzyskać kawałek parcianego paska????!!!! Kto tak robi??? Poza tym,świetna robota i super kanał!!👍👍👍

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому +1

      Cześć, plastik nigdy nie był używany w SVT-38 lub SVT-40. Zawsze było drzewo

    • @darekstajkowski9996
      @darekstajkowski9996 Рік тому

      @@ScrewsAndTools Jeśli tak to przepraszam, aczkolwiek miałem kiedyś ten bagnet z plastikowymi okładkami,wykopek z epoki....

  • @zou6492
    @zou6492 Рік тому

    Beepbeep Alex 🤓 my friend... Another beatiful and great restoration🗡️ 👏👏👍 Friendship from Belgium 😉🇧🇪👋🇬🇪

  • @sarantissporidis391
    @sarantissporidis391 Рік тому

    You are getting better every day my friend 😊

  • @alantan6255
    @alantan6255 Рік тому

    Great masterpiece of work do. You really a absolutely great job 👍

  • @oneshotme
    @oneshotme Рік тому

    Great restoration and you did a wonderful job restoring it!! Man the blade it looks like it's be to hell and back with all the gashes it has on it
    Enjoyed your video and I gave it a Thumbs Up

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому +1

      Thank you so much!

    • @oneshotme
      @oneshotme Рік тому

      @@ScrewsAndTools You're very welcome!!!! And I'll go back and check it again

  • @Mastice81
    @Mastice81 Рік тому

    Compared to the quality of the german Mauser Kar98's bayonet, this looks like the "discount version".
    But you did an excellent job restoring It! 👏🏻👍🏻

  • @bobjoncas2814
    @bobjoncas2814 Рік тому

    ;...LOOKIN' GOOD, NICE WORK, KEEP WELL..

  • @mwm302
    @mwm302 Рік тому

    Where did the plastic handles come from? They looked original. Anyway, much better handles now and a beautiful knife

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому

      SVT-38 and SVT-40 have never had plastic on the handles from the word never. The fact that it was already a household art.

  • @grimbo73
    @grimbo73 Рік тому

    I didn't think the belt loop was salvageable...well done! Could the bayonet be a later model...from after the war? Might explain the use of the plastic....

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому

      Hello, SVT-38 and SVT-40 have always had a tree on the handle, this is already plastic put by the owner who used it in everyday life or household. Thank you for attention

    • @grimbo73
      @grimbo73 Рік тому

      @@ScrewsAndTools ahh...that makes sense.

  • @krugerhenning2263
    @krugerhenning2263 Рік тому

    Cool thx!

  • @RNDM85
    @RNDM85 Рік тому

    You are innovative

  • @observer0395
    @observer0395 Рік тому

    9:30 сто лет не видел применение плашки)...

  • @experimentsvs4270
    @experimentsvs4270 Рік тому

    Great job my friend!👍

  • @jerrieyum
    @jerrieyum Рік тому

    Bravo 👏🏾

  • @mikhailaivazov
    @mikhailaivazov Рік тому

    Алекс как всегда на уровне

  • @عليعلي-ه1ط3غ
    @عليعلي-ه1ط3غ Рік тому

    Very good

  • @Maximus202.
    @Maximus202. Рік тому

    Классные перчатки))) "Би-бип"!

  • @zelehbi7957
    @zelehbi7957 Рік тому

    Этим штыком ещё очень долго и активно пользовались и после войны.

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому

      Да конечно, такое вижу в 70% становится обычно утилитарным предметом. Пару дней назад сам увидел пару кинжалов и что вы думаете? Сточены переточены... как-будто тонну картошки им чистили да колбасу резали. Как говорится у всех разное восприятие предметов)

  • @ss-7117
    @ss-7117 5 місяців тому

    Штык уточен на наждаке, был ли смысл с ним возиться? Ножны красились черной краской. Накладки рукояти были гораздо более темные. Полосы, из которой сделан подвес, выпускаются до сих пор и продаются в хозяйственных и на авито. Зачем было сшивать мертвый?

  • @Succor2
    @Succor2 4 місяці тому

    Love it!

  • @Amiran_Ramalotti
    @Amiran_Ramalotti Рік тому +1

    гамарджоба мой друг.. рад поддержать комментом твой канал..

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому

      Мшибзиакуа! Большое спасибо за внимание.

  • @ananjeff
    @ananjeff Рік тому

    С прошедшим Вас праздником, Алекс! Как всегда, с большим удовольствием посмотрел Ваше новое видео. Отличная работа, особенно исправление вмятин на ножнах! Смутило меня только - бережное отношение к подвесу и при этом скалывание накладок...Впрочем ,если это изначально хотелось хозяину предмета, то не смею критиковать. Мне пластмасса на рукояти показалась "улучшением" сделанным почти так же давно, как и сам штык.

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому +1

      Привет, спасибо! Ну на свт-38 и свт-40 никогда не было пластика поэтому я решил сделал как должно было быть. Дерево. Вот поэтому такие пироги. Хотя многие исходя из комментариев увидели свт-40 впервые штык) Типа оказывается пластик должен быть))))

    • @victbass4792
      @victbass4792 Рік тому

      Реставрировал японский штык с Гражданской - деревянные накладки были в плохом состоянии, пришлось повозится с ними больше чем со всем остальным. Хозяин говорил об замене, но когда я сделал восстановление с пропиткой он сказал что не может представить клинок с накладками новоделом ....

  • @МихаилГапоненко-н2б

    27 лайк,мой😊. Спасибо, всегда приятно смотреть,Вши работы.

  • @Шопенгауэр-ю8щ
    @Шопенгауэр-ю8щ Рік тому

    А я то думал "не ужели кому-то за границей интереса история грузинского оружия" а оказывается вы живёте в Грузии,

  • @Андрей.Акулов
    @Андрей.Акулов Рік тому

    Мастер! Хорошая работа.

  • @misterraf1999
    @misterraf1999 Рік тому

    _Шикарный вид!_ 👍🏻
    😂

  • @Iron_61
    @Iron_61 Рік тому +1

    С этим штык ножом, наши деды дошли до Берлина, с Днём Победы!!!

  • @خالدالبيومي-ظ1ز

    I may understand that you wanted to keep the original piece of cloth/ strap , but couldn’t you replace it with a current similar piece just to give it a longer life?!

  • @oneshotme
    @oneshotme Рік тому

    The subtitles isn't working. So what was the deal with the man?? Did you restore it for him??

    • @ScrewsAndTools
      @ScrewsAndTools  Рік тому +1

      Hello, please check again. I wrote them, I'm sure it was my friend from the flea market who asked me to restore them. ps always all the information in the description of the video

  • @Wab-w0wab
    @Wab-w0wab Рік тому

    Super👍