My level of frustration was through the roof with trying to get a decent tutorial. Then I found this. Great job, made it seem simple where others overcomplicated it.
EXCELLENT JOB. I am well versed in the G1000 but love the way you explain all the details, and no, for a beginner it is NOT too detailed, in fact is it perfect and would love to see more on the G1000 as well as the GTN 750. Keep up the Great Job!
What I appreciate most, other than the great visuals, is keeping to a few basic points and not getting into additional points that would smother the basics. Thanks!
Thanks for this. As a relative newcomer you have made everything clear. The majority of guides I have come across before seem to add confusion rather that take it away.
Probably a bit late in the comments, but I have only just started using X-Plane, and this tutorial came up when I was looking for something showing how to use the G1000 in the sim. All I can say is excellent, and I'm looking forward to the next tutorials in the series.
Both your video production value and your teaching skills are exceptional! Many thanks. I am now going to visit your UA-cam page and hope that their other videos relating to the G-1000! Many years ago I used to fly into my home airport in both my Commander and previously in my 182 using their ILS. I did manage to figure out how to capture the ILS on this G-1000 but it wasn't easy without some guidance. My planes still had 'steam gauges' so this G-1000 is new to me. I think that intercepting then flying the ILS is a great exercise for any pilot, in a sim or otherwise. It's fun and it helps to sharpen your skills. Thanks for your excellent work and for sharing.
Matchless! A straight forward navigation vid that assumes no prior knowledge. Now I can go anywhere from anywhere. Thanks Grip, subscribed to my kind of channel.
Hey 👋 thanks a million for the VFR FLIGHT ✈️ Review. I learned that way back in the ‘60’s when I got an Acutron watch for Christmas. It’s really a a great 👍 VFR tool for short hops in unfamiliar territory if you have a watch with analog hands and a road map which most people don’t. But it really works, and it really is a smart idea to keep a map in your flight bag along with a paper sectional. Never know when you might have instrument failure and need to go old school. Anyway, I still like analog watches and flying with steam gauges. Thanks again for a great 👍 video.
I'm delighted you liked the Video Steve, we actually still use the handheld CRP-5's and slide rulers and VFR charts for training here in Europe. Funny story - I was flying in California a few years ago and landed in a small strip, there were lots of Vets from 40's 50's 60's from the airforce having coffee. When they saw me planning my next legs with the manual flight computer at my table - they where amazed, they all come over and were fascinated that I was using such antiquated navigation techniques. They said they haven't seen one since the war! One Texan said, "Hot Dang Kid, use one of these", and put his GPS in my face and proceeded to show me how it worked. I retorted, "What witchery is this"! What sort of sorcery and Idolatry is this!", while I took out the batteries and asked him to show me how it worked. We had a great laugh!!
Brilliant Philip, I'm so glad you found the video useful! I'm motivated to make more of these types of videos now. Roll on Flight simulator 2020! Thanks for Subscribing and I'll see you soon again. : )
So far its excellent. I hate flying with glass cockpits and the g1000 auto pilot setup because its so busy. But hopefully with this series it will help sort it out a bit.
Helpful. Good aircraft to use too- because its easier to see the g1000. Would look forward to a session on 1) Using autopilot and 2) flying point to point and then intercepting a glide slope using IFR and RNAV settings. Also what happens/ what to do when you don't pick up the ILS or RNAV signal? The step by step approach is helpful.
I'm a checklist kind of guy. I'd like to see a checklist to follow for installing your departure airport and destination airport. Then maybe a list for planing a waypoint (intersection), airways to a waypoint, and going direct to a waypoint or airport.
Thanks so much for the very helpful and most useful I've found for the G1000. Nice small chunks make learning easier for an old codger I am. Especially helpful are your use of enlarging the control/button to use. Looking forward to more tutorials on increasingly complex subjects. Subscribed
many thanks for an excellent video on G1000 use suitable for me a newbie to flight simming as you've now got me bitten by the bug I'm now a hooked flyer hungry for more videos' keep up the good work!!!!
The videos that I've seen before only show all the characteristics of the G1000, but here, you actually can start using some of them in a simple flight. Please don't be afraid to add complexity (no too much) to your next videos.
Keep them comin' Gripp, I really liked your tips on the other video around VFR handy calculations. I look forward to more of the same and even more on the advanced side.
Very nice, easy to understand. I hope you plan to do more like this one. When I click the Garmin G1000 in. X-Plane 11 it pops out in a separate screen. The layout is very different from the window behind the popout why?
Reaction Review Thank you very much for your reply. It’s a fast aircraft with a lovely modern cockpit. This will be the next aircraft to be added to my hanger. All the best. Martin 🛩
Can anyone explain (if it’s possible)...I have purchased the g1000 apps on the ipad for PFD and MFD but how do I get them to run WITHIN X-Plane all on the same iPad???
Nice video think it will help enornmously. Just one point my hdg button gives me 024 degrees, am I on the wrong runway only get runway 3 as option and my runway view seems different although heading still shows 107??
I stopped watching this. All I can make out here is that you are familiar . For someone to learn you have to break the instruction into parts and keep adding parts.
Hi Dick, It maybe my accent which is why you find it difficult to hear me, depending where you come from. However, I do agree that it is a common issue with people speaking too fast on youtube videos, I admit in this video I do speak too quickly, as it is with all new you-tubers, and I was new to youtube in the making of this video. Since the making of this video I have invested in new sound voice recording equipment and speak more slowly. I spoke to a voice actor briefly, and believe it or not there is quite a lot training and technique involved, which I cannot afford at the moment. In my next video, (out on or before this Saturday), I'll Keep your comment in mind, let me know what it sounds like! Here is a later video, let me know if it is clearer than the earlier videos. Hold no punches. ua-cam.com/video/D-jMVN_BhR4/v-deo.html
My level of frustration was through the roof with trying to get a decent tutorial. Then I found this. Great job, made it seem simple where others overcomplicated it.
Glad it helped!
@@GripperSim JUST WISH narrator had slower kentucky draw instead of a quick talking scottsman that mumbles
This is very helpful....I needed this. Simple and to the point. Which suits me just fine.
Glad it was helpful Ralph! Thanks for letting me know! : )
EXCELLENT JOB. I am well versed in the G1000 but love the way you explain all the details, and no, for a beginner it is NOT too detailed, in fact is it perfect and would love to see more on the G1000 as well as the GTN 750. Keep up the Great Job!
Thanks Flight! I'm delighted you enjoyed it and found it useful! Cheers! : )
What I appreciate most, other than the great visuals, is keeping to a few basic points and not getting into additional points that would smother the basics. Thanks!
Finally I found a real tutorial of how to go to one point to another. I hope to see more videos like this. Thanks.
Hi Luis! I'm delighted you enjoyed the video! : )
Thanks for this. As a relative newcomer you have made everything clear. The majority of guides I have come across before seem to add confusion rather that take it away.
❤ Most watchable tutorials I've found on UA-cam. It's like a warm hug in video format.😊
Probably a bit late in the comments, but I have only just started using X-Plane, and this tutorial came up when I was looking for something showing how to use the G1000 in the sim. All I can say is excellent, and I'm looking forward to the next tutorials in the series.
Glad it helped Sorares, I'm planning on more tutorials, time is the issue. : )
Both your video production value and your teaching skills are exceptional! Many thanks. I am now going to visit your UA-cam page and hope that their other videos relating to the G-1000! Many years ago I used to fly into my home airport in both my Commander and previously in my 182 using their ILS. I did manage to figure out how to capture the ILS on this G-1000 but it wasn't easy without some guidance. My planes still had 'steam gauges' so this G-1000 is new to me. I think that intercepting then flying the ILS is a great exercise for any pilot, in a sim or otherwise. It's fun and it helps to sharpen your skills. Thanks for your excellent work and for sharing.
Matchless! A straight forward navigation vid that assumes no prior knowledge. Now I can go anywhere from anywhere. Thanks Grip, subscribed to my kind of channel.
I've just got X-Plane and am flying with a PS4 controller! This is exactly the type of tutorial I'm looking for, thanks!
Thanks JP I'm delighted you enjoyed it! : )
Thanks for the great job. If you continue I might be able to finally operate the G1000. Very detailed and to the point. Please don’t stop.
Joseph Correia Hi Joseph, no worries, I’m glad you like my content. More to come! : )
Hey 👋 thanks a million for the VFR FLIGHT ✈️ Review. I learned that way back in the ‘60’s when I got an Acutron watch for Christmas. It’s really a a great 👍 VFR tool for short hops in unfamiliar territory if you have a watch with analog hands and a road map which most people don’t. But it really works, and it really is a smart idea to keep a map in your flight bag along with a paper sectional. Never know when you might have instrument failure and need to go old school. Anyway, I still like analog watches and flying with steam gauges. Thanks again for a great 👍 video.
I'm delighted you liked the Video Steve, we actually still use the handheld CRP-5's and slide rulers and VFR charts for training here in Europe. Funny story - I was flying in California a few years ago and landed in a small strip, there were lots of Vets from 40's 50's 60's from the airforce having coffee. When they saw me planning my next legs with the manual flight computer at my table - they where amazed, they all come over and were fascinated that I was using such antiquated navigation techniques. They said they haven't seen one since the war! One Texan said, "Hot Dang Kid, use one of these", and put his GPS in my face and proceeded to show me how it worked. I retorted, "What witchery is this"! What sort of sorcery and Idolatry is this!", while I took out the batteries and asked him to show me how it worked. We had a great laugh!!
Thank you, I was struggling to find a good tutorial and your tutorial made a lot of sense and made it easy. Appreciate it! :)
Finally one step at a time, my brain thanks you :) Short and to the point. Great video. Subscribed
Brilliant Philip, I'm so glad you found the video useful! I'm motivated to make more of these types of videos now. Roll on Flight simulator 2020! Thanks for Subscribing and I'll see you soon again. : )
Exactly what I was looking for in this tutorial. Learned a lot, including the phrase "stuff it up". I miss living in the UK..
Im very satisfied with the quality of your explanation, you really cut to the chase!
Thanks Rodrigo! I'm glad it works for you!
Thanks for this beginners guide to GPS and the Garmin 1000. Very helpful for this beginner.
So far its excellent. I hate flying with glass cockpits and the g1000 auto pilot setup because its so busy. But hopefully with this series it will help sort it out a bit.
i was so frustrated trying to maek a flight plan, this is so much better. SIMPLE
Very well explained for this elderly novice. Bookmarked for revision when needed!
Thanks, your explanations are so clear and making what is complicated easier. Wonderful job.
Thanks. What a great video. Your drawing on the paper, really made me understand it... Thanks again
Helpful. Good aircraft to use too- because its easier to see the g1000. Would look forward to a session on 1) Using autopilot and 2) flying point to point and then intercepting a glide slope using IFR and RNAV settings. Also what happens/ what to do when you don't pick up the ILS or RNAV signal? The step by step approach is helpful.
Perry Smith will do perry! ; )
This is great. So many other tutorials tell me how to build the clock when all I want to know is how to tell what time it is.
Perfectly explained and demonstrated. Thanks.
like the way you have explained for beginners hope to see more of these videos
Your video is well put together for beginners. Keep up the great work!
Roland Gardiner Sure will Roland! Thanks.
Thank you very much. Very well explained. Please continue your posts !!
Excellent short simple informative and fun thank you please keep them coming 👏👏👏👏👏👏👏
You got it!
I'm a checklist kind of guy. I'd like to see a checklist to follow for installing your departure airport and destination airport. Then maybe a list for planing a waypoint (intersection), airways to a waypoint, and going direct to a waypoint or airport.
Thanks so much for the very helpful and most useful I've found for the G1000. Nice small chunks make learning easier for an old codger I am.
Especially helpful are your use of enlarging the control/button to use.
Looking forward to more tutorials on increasingly complex subjects.
Subscribed
many thanks for an excellent video on G1000 use suitable for me a newbie to flight simming as you've now got me bitten by the bug I'm now a hooked flyer hungry for more videos' keep up the good work!!!!
Thanks FlyingFred! I'll be doing more of these when I can! : )
Nice, great step by step. Enjoyed this video.
Thanks Shane! : )
Awesome tutorial! Keep up the good work! 👍
Nice video. I just got ms flight sim 2020 and need to learn this g1000. This video helped.
The videos that I've seen before only show all the characteristics of the G1000, but here, you actually can start using some of them in a simple flight. Please don't be afraid to add complexity (no too much) to your next videos.
Will do Luis! : )
Keep them comin' Gripp, I really liked your tips on the other video around VFR handy calculations. I look forward to more of the same and even more on the advanced side.
Thanks Captain Moose! I thought I relied to you earlier. I'll get to more complex tutorials when I can so. : )
Wish you could do a flight plan with waypoints and an ils approach.
Hi Kreemerz! It's actually on the list, I'll get to it for sure! : )
great stuff. Well explained. Keep them coming.
Thanks man!
THANKS, And thanks for zooming in, unlike other videos
Very nice, easy to understand. I hope you plan to do more like this one. When I click the Garmin G1000 in. X-Plane 11 it pops out in a separate screen. The layout is very different from the window behind the popout why?
Thank you for your excellent tutorial. Please can I ask what aircraft you are flying in this video? Many thanks Martin 🙂✈️🛩
Hi Martine, I't the Epic E1000
store.x-plane.org/Epic-E1000-G1000-Edition_p_941.html
Reaction Review Thank you very much for your reply. It’s a fast aircraft with a lovely modern cockpit. This will be the next aircraft to be added to my hanger. All the best. Martin 🛩
Subscribed. Gr8 tutorial. G'day from down under.
Great vid as usuall, keep them coming
Thanks Emu!
really thanks for this, also great job on the circle you drew lol
Delighted it helped Inertia, The tutorials are simple for now, for beginners, they'll get more complicated as time goes on.
Nice work Waterford man. ;)
Brilliant well explained loved it
i know i can program a button for auto-pilot. can i do the same to turn on/off NAV? thanks
That's a great video. Thank you -- I learned something!
Brilliant video well explained even a newbie to the game such as myself understood this.
Thats great Dimo! I'm glad it helped you out! : )
Must have auto pilot, love this one thanks.
Appreciate the great tutorials. Now I just need to get a handle on my fiddly knob.
Can i buy a physical g1000 form amazon
thanks so much for the video, keep them coming!
Will do RPM, thanks!
very helpful. I am looking for a video on how to program an approach into the G1000 if you're planning on making more of these?
I am now Austin. ; ) I'll make it happen as soon as I can. Thanks for watching! : )
What's the keyboard shortcut for the cdi push button?
Can't move knobs with laptop. I see arrow but how do I roll the knob?
if i saved the flp as a fms will the plane fly to the waypoints between dep and arrival. been in hospital for 2 months and getting back to xp11
Thanks for the videos. I am doing my PPL out of Galway with a G1000 Cessna and fly Xplane so your viedos helps a lot.
Thanks John! I'm glad it helped! : )
Can anyone explain (if it’s possible)...I have purchased the g1000 apps on the ipad for PFD and MFD but how do I get them to run WITHIN X-Plane all on the same iPad???
Underrated video
Thanks for the vote of confidence! I'll be doing more of these t some point! : )
Thanks I've been waiting for this.
Very helpful! Many thanks.
How do I set the altimeter?
Thank you so much for this tutorial!
Glad it was helpful Percy!
Nice video think it will help enornmously. Just one point my hdg button gives me 024 degrees, am I on the wrong runway only get runway 3 as option and my runway view seems different although heading still shows 107??
Sorted !!
Great stuff, many thanks
Basics, I no did see how use the G1000, like button functions. ?????
Perfect! Thank you!
Glad you enjoyed it Miguel! Thanks for commenting! : )
What is this plane?
excellent. thanks.
*GREAT!*
Thanks Hal! : )
By faaaar best so far. By faaar
That circle though
Yep! : )
that look a bit more simpler
i normally do it through sim . but thats a bit more immersive
Thanks Peter.
what the difference???
PFD and MFD, I got them the wring way around in short! :::)))
I stopped watching this. All I can make out here is that you are familiar . For someone to learn you have to break the instruction into parts and keep adding parts.
Quit mumbling! Speak clearly and distinctly.
Hi Dick,
It maybe my accent which is why you find it difficult to hear me, depending where you come from. However, I do agree that it is a common issue with people speaking too fast on youtube videos, I admit in this video I do speak too quickly, as it is with all new you-tubers, and I was new to youtube in the making of this video. Since the making of this video I have invested in new sound voice recording equipment and speak more slowly. I spoke to a voice actor briefly, and believe it or not there is quite a lot training and technique involved, which I cannot afford at the moment. In my next video, (out on or before this Saturday), I'll Keep your comment in mind, let me know what it sounds like! Here is a later video, let me know if it is clearer than the earlier videos. Hold no punches. ua-cam.com/video/D-jMVN_BhR4/v-deo.html