Im using 2017 model. The vibrations and rattling sound is not only from that area but from all over the tank plastic cover. The design flow i would say. I have several rubber pieces all around that plastic tank cover which actually fixed the problem for now.
It is actually not an flaw in the design. The vibration is because of the service people. They still doesn’t know the proper method to remove the tank for filter replacement without damaging the damping material.
@@redliner_madhu This is why i said poor design. It is not about damaging the dampeners but when you remove the tank cover you will see several rubber pieces falling all over the place 😁. And, can't imagine how many screws and pieces you'll have to deal with just to change the air filter or fuel filter. I don't see a function for these plastic covers and parts except for the looks which is very bad.
Hello friends and dominar 2019 owners.. Today I spoke to the service manager of Bajaj in Hyderabad.. He gave me a satisfying answer for my doubts regarding the engine noise due to tappet clearance. This is told by the service engineer so pls don't doubt my credibility. He said that 2019 dominar have the same tappet clearance like that of duke 390. The reason for the tappet noise is riding at inadequate speed at the top gear. If you are riding at low speeds in your top gear thinking that you will get more milege then you are wrong.. that will cause tappet clearance problems .Even in owners manual it is mentioned clearly about the speed which you should maintain on each gear. See you guys are the owners of a 373.3 CC single cylinder motorcycle..If you are riding dominar like a 100 cc motorcycle definitely you are going to worn out your engine.. So maintain a speed above 70km/ hr when you are riding in 6th gear.Please keep that in mind. secondly the rim bend issue is mainly happening due to the inadequate tyre pressure.. And one more thing.. please dont do console update in dominar for making the gear shift indicator displayed on the main console. Bajaj itself is not doing that since the update is found faulty.. If you do that update there are chances of ecu communication failure and speedometer failure. One last point It is always important to maintain fuel level above the reserve 3L.Running on reserve fuel is not recommended for fuel injected motorcycles. If you have any further queries contact the service manager of the main bajaj dealership in your area. As some automobile engineers in this group had said and teased before , I am not a person who have deep knowledge about the Technical side of a Motorcycle.. But i am sure that I know to ride and maintain a High performance motorcycle properly.. What all i am sharing with you is after serious discussion with service engineers... Thank you..
No brother i have a 2017 model but the RPM when we start the bike stops at 1500 or 2000 and when we drop a gear the sound "tuk" comes from inside is it normal ? Brother.
Thank you for showing a fix for the vibrations issue... I think this is issue specific to twilight plumb color dominar more, than other colors, coz recently during a Bajaj customer meet up I saw many customers of especially plumb color report the vibration issue to the Bajaj engineers including me. Good job anyways....
Sound from the rear disk break might be due to dust particles. Take it to service centre and ask the technician to remove the rear wheel, break pads and check if there is sludge in the pad. The pad should be even.
@@abhishekjaiswal1817 As a 2018 model owner I'm facing heavy major issues.. 1. Throttle lag. 2. Vibrations in fuel tank, Rattling noise. 3. Gearbox heavy and noisy 4. Clutch upshift and downshift is very hard while upshifting it's making noise like gearboxes have broken. 5. Exhaust assembly rattling noise. These are the issues in facing on 2018 dominar.. it's my honest review.. even bajaj service centre can't able to solve this issues
jagadesh sainath Because it’s fibre na that’s why my friend owns a 390 Duke 2016 version it also vibrates so much when I ride below 40 Kmph continuously
nice work... let me share a bit... that component material is not suitable.... it should have been with glass fillets.... at the end grt work... rather than being like a baby on the name of bajaj u nailed it..... good work done
Hi MAD GARAGE... I got my bike on 4th September and already clocked 170km, even I am getting this sort of vibration from the front end of the tank while nearing 3800-4500RPM... crossing this rev band there is no vibration as such(may be so since I am in run in period). will this be addressed/ resolved in 1st service? I already reported to service guys and said this will be taken care in 1st service.. meanwhile, the bike is awesome.
Sharath Marpally I'm not sure if it gets fixed in first service. But you can do it yourself or take it to a mechanic and tell him what to do. Or tell the guys in Bajaj service how to fix it.
Hi man. So i got my Dominar on the 5th of Feb. And i also face a jarring sound sometimes when i am below 4k rpm and give it a suddeen acceleration. I though this sound was from the engine and maybe that i accelerating too much on gear which was maybe one up than ideal. Since then i have changed my riding style a little which basically is no extreme sudden acceleration or even if i do a sudden acceleration i do it at a lower gear so that the revs are above or atleast at 4k rpm. This has solved my problem. I just saw your video and now i am thinking maybe it was this all along. Can you describe the exact sound somehow? I also think that maybe the ecu update will solve this. I am still running with the stock ecu mapping. Do you know about whats new in the ecu and should we even get it or stick with the old one? Sorry about the rant.
Manmeet Singh ECU Update has nothing to do with jarring sound. The sound is due to improper daming. If you feel issue with power delivery then take it to service center and update the ECU..
Built material of Bajaj dominar's fuel tank is safe for long term user? And tell me built material of fuel tank , is it fiber or steel , or is it safe ?
Noticed the Rezvilla sticker, assuming you bought some stuff from them... can I ask 1. How much do they charge for India shipping? 2. Do they use private courier or postal mail (risk of loss)? 3. Any issues with restocking?
Dear sir I am 50yrs old and passionate for doing a ride of 300 to 1000kms.But I don't have a bike.i am getting a dominate 2017 only 2200kms used. Should I buy it and what should I check before buying
Mustafa Haji Yes the issue is resolved in the new batches. I have tested it. If you are planning to buy, please book after February 2018. They are planning to launch new shades with certain material upgrades.
MAD GARAGE even I too planned to buy dominor this month but new paint scheme is about to launch so waiting. Mostly from January new paint scheme will be in market.
Im using 2017 model. The vibrations and rattling sound is not only from that area but from all over the tank plastic cover. The design flow i would say. I have several rubber pieces all around that plastic tank cover which actually fixed the problem for now.
It is actually not an flaw in the design. The vibration is because of the service people. They still doesn’t know the proper method to remove the tank for filter replacement without damaging the damping material.
@@redliner_madhu This is why i said poor design. It is not about damaging the dampeners but when you remove the tank cover you will see several rubber pieces falling all over the place 😁.
And, can't imagine how many screws and pieces you'll have to deal with just to change the air filter or fuel filter. I don't see a function for these plastic covers and parts except for the looks which is very bad.
thanks a lot, I've had the same issue with the 2021 UG model, I tore a lot of parts to find the source, and it was your solution that fixed it
Hello friends and dominar 2019 owners.. Today I spoke to the service manager of Bajaj in Hyderabad.. He gave me a satisfying answer for my doubts regarding the engine noise due to tappet clearance. This is told by the service engineer so pls don't doubt my credibility.
He said that 2019 dominar have the same tappet clearance like that of duke 390. The reason for the tappet noise is riding at inadequate speed at the top gear. If you are riding at low speeds in your top gear thinking that you will get more milege then you are wrong.. that will cause tappet clearance problems .Even in owners manual it is mentioned clearly about the speed which you should maintain on each gear.
See you guys are the owners of a 373.3 CC single cylinder motorcycle..If you are riding dominar like a 100 cc motorcycle definitely you are going to worn out your engine.. So maintain a speed above 70km/ hr when you are riding in 6th gear.Please keep that in mind.
secondly the rim bend issue is mainly happening due to the inadequate tyre pressure..
And one more thing.. please dont do console update in dominar for making the gear shift indicator displayed on the main console. Bajaj itself is not doing that since the update is found faulty.. If you do that update there are chances of ecu communication failure and speedometer failure.
One last point It is always important to maintain fuel level above the reserve 3L.Running on reserve fuel is not recommended for fuel injected motorcycles.
If you have any further queries contact the service manager of the main bajaj dealership in your area.
As some automobile engineers in this group had said and teased before , I am not a person who have deep knowledge about the Technical side of a Motorcycle.. But i am sure that I know to ride and maintain a High performance motorcycle properly.. What all i am sharing with you is after serious discussion with service engineers...
Thank you..
Hey. Which service center did you visit in Hyderabad?
@@xlonewolfx999 maybe toli chowki even i visited there but not for tappet noise for ecu update
@@inighthawkk2223 haha thanks but i sold my dominar
@@xlonewolfx999 ohh now which bike ur riding
@@inighthawkk2223 Shine SP lol Shaukhaa karna tha karliye bhai ab nahi hota. Petrol ka rate dekhe.
Very nice..! Do you have any idea to fix the counky sounds from gear?
Midhun Mohan you mean the hard "tuk" sound you get when you shift first gear?
Ya any solution? :( And some time other gears also makes the same in small amount!!!
By default, you will get 'tuk' sound while shifting 1st gear. If you get in other gears, you need to adjust the clutch.....
I bought my Dominar in Aug 2017. Still i have this irritating sound but only at with low speed.
Anybody facing handlebar vibration in Dominar 2017?
No brother i have a 2017 model but the RPM when we start the bike stops at 1500 or 2000 and when we drop a gear the sound "tuk" comes from inside is it normal ? Brother.
I went to showroom for this issue he said that that's the original idle sound we cannot change that.
@@Phani7 Yes, but how old is your bike's chain sprocket and the bushes?
2018 blue dominor same jarrr sound broo. No changee
Thank you for showing a fix for the vibrations issue... I think this is issue specific to twilight plumb color dominar more, than other colors, coz recently during a Bajaj customer meet up I saw many customers of especially plumb color report the vibration issue to the Bajaj engineers including me. Good job anyways....
christopher shamir oh really? Thanks for the info buddy!! 😊
mine is midnight blue...i have the same problem...
Still has same issue in 2021
I had bought 1 month before.still the issue not solved brother.
I have the same issue , will u help me fix it? I will bring my bike to ur garage.
prem maheswaran sure!!! My pleasure!! 😊
Good work brother...
Subbed!
Thanks so much bro. I had purchased one in February and had this issue. Also I have a squeaking sound from rear disk . Do you have any remedy for it
Sound from the rear disk break might be due to dust particles. Take it to service centre and ask the technician to remove the rear wheel, break pads and check if there is sludge in the pad. The pad should be even.
MAD GARAGE sure I will do that thanks bro.
Hi did the issue is fixed now. So all New model will not have this vibration, As I am planning to buy in Feb 18
Bought Matt Black 2018 edition still facing this issue
ua-cam.com/video/a48JUEX3Dq8/v-deo.html
@@abhishekjaiswal1817 As a 2018 model owner I'm facing heavy major issues..
1. Throttle lag.
2. Vibrations in fuel tank, Rattling noise.
3. Gearbox heavy and noisy
4. Clutch upshift and downshift is very hard while upshifting it's making noise like gearboxes have broken.
5. Exhaust assembly rattling noise.
These are the issues in facing on 2018 dominar.. it's my honest review.. even bajaj service centre can't able to solve this issues
What are the issues? Any heating issues, ecu failure, starting problems
I will make a separate video on it!
Hi the same vibration noise happening in my duke 200 petrol tank,while on slow riding
jagadesh sainath Because it’s fibre na that’s why my friend owns a 390 Duke 2016 version it also vibrates so much when I ride below 40 Kmph continuously
nice work... let me share a bit... that component material is not suitable.... it should have been with glass fillets.... at the end grt work... rather than being like a baby on the name of bajaj u nailed it..... good work done
Gracias por tomarte el tiempo de hacer el video !!
Lo pondré en practica !!
Saludos desde Argentina!
Mi placer!! 🙂
Can u plz refer some mechanic in Delhi..from where should I get the job done for reducing the vibrations in dominar400
Daman deep Singh im sorry buddy, im from Chennai..... take it to bajaj service centre and show them the video.....
Hi MAD GARAGE... I got my bike on 4th September and already clocked 170km, even I am getting this sort of vibration from the front end of the tank while nearing 3800-4500RPM... crossing this rev band there is no vibration as such(may be so since I am in run in period). will this be addressed/ resolved in 1st service? I already reported to service guys and said this will be taken care in 1st service.. meanwhile, the bike is awesome.
Sharath Marpally I'm not sure if it gets fixed in first service. But you can do it yourself or take it to a mechanic and tell him what to do. Or tell the guys in Bajaj service how to fix it.
Trust me brother. It goes away after the first service.
I Brought my dominar on 17 October can u plz tell me.. which batch of production does it belongs??
Doc Shivam 1st batch and fifth bike in Chennai.....
MAD GARAGE he is asking about his bike 😛
Bro, first batch started on Jan 15th. So yours is no where near the initial batches.
Nikhith HM lol!! My bad!!
Im not sure which batch ur bike belong to, u need to check with showroom.
My bike make sound hard sound when i shift from neutral to 1 and 2
I'm trying a work around for it. I will post a separate video once I find a solution..
Sanket Walunj .. check chain lube. also few ppl have told me it is normal in dominar . hope u press the clutch completely for upshifts ..
pav_s2003 pavan @ i completely press clutch but still it sounds harder 😞.
Sanket Walunj it is normal I guess.. hope it is not present in higher than 2nd gears..
pav_s2003 pavan no not beyond 2 one. Only in neutral ,1&2
Should I take it to Bajaj itself? Will they help me fix it?
Salman Ahmed Khan I'm not sure buddy, but you can check with them
Salman Ahmed Khan show them this video bro..
Hi man. So i got my Dominar on the 5th of Feb. And i also face a jarring sound sometimes when i am below 4k rpm and give it a suddeen acceleration. I though this sound was from the engine and maybe that i accelerating too much on gear which was maybe one up than ideal. Since then i have changed my riding style a little which basically is no extreme sudden acceleration or even if i do a sudden acceleration i do it at a lower gear so that the revs are above or atleast at 4k rpm. This has solved my problem.
I just saw your video and now i am thinking maybe it was this all along. Can you describe the exact sound somehow? I also think that maybe the ecu update will solve this. I am still running with the stock ecu mapping. Do you know about whats new in the ecu and should we even get it or stick with the old one?
Sorry about the rant.
Manmeet Singh ECU Update has nothing to do with jarring sound. The sound is due to improper daming. If you feel issue with power delivery then take it to service center and update the ECU..
Built material of Bajaj dominar's fuel tank is safe for long term user? And tell me built material of fuel tank , is it fiber or steel , or is it safe ?
Its high-density polyethylene (HDPE). It is reliable, most of the cars has the same material. Cars like swift, Honda Amaze etc has the same.
MAD GARAGE thanks
MAD GARAGE and as i can see in this video that inside that hdpe frame there is one more tank , ...what was that
The outer cover is not HDPE, the tank that you see inside is HDPE. The outer cover is fiber...
MAD GARAGE okay fine , i got it , thank you
My brother please please where can I find this work shop in Bangalore please Iam facing the same problem
Can dominer tanky can be used in pulsar ns200
Noticed the Rezvilla sticker, assuming you bought some stuff from them... can I ask
1. How much do they charge for India shipping?
2. Do they use private courier or postal mail (risk of loss)?
3. Any issues with restocking?
Dear sir I am 50yrs old and passionate for doing a ride of 300 to 1000kms.But I don't have a bike.i am getting a dominate 2017 only 2200kms used. Should I buy it and what should I check before buying
Irresponse youtuber..unsuscribe
Did u check with r&d whthr they resolved it or not buddy?bcus I'm planning to buy one before buying I need to be satisfied
Mustafa Haji Yes the issue is resolved in the new batches. I have tested it. If you are planning to buy, please book after February 2018. They are planning to launch new shades with certain material upgrades.
MAD GARAGE even I too planned to buy dominor this month but new paint scheme is about to launch so waiting. Mostly from January new paint scheme will be in market.
Mad garage..thanks a lot sir for your reply...thn for sure I'll be waiting for the new shades with some upgrades
Can u suggest any after market windshield for dominor ??
tinyurl.com/y8tpe76e
Dominar me centar lock lagwana theek rahega ?
are you gogi rana .?
Nick Johns no buddy....
Tell me ur garage location bro
Buddy I don't have a garage. MAD GARAGE is just a name. :-)
MAD GARAGE where can I solve this issues n my domi bike??
Mähèéndär Rè Mó you need to do it by yourself or go to Bajaj services center and show this video....
MAD GARAGE sure sir...
Booked my dominar yesterday is it the 2nd batch?
mihir karopady if you booked it yesterday it must be 4th or 5th....
those who r scrolling down to see comment mentioning that cover didn't get fitted haha...plz like
Bhrusean Tv fitting the cover is very tricky and I don't have a camera man to hold my phone. Sorry I couldn't show the complete process...
MAD GARAGES said just for fun...ya I believe on u and ur work I am going to try it
Good vid bro
Bro r u residing in Delhi...?
Daman deep Singh nope, im in Chennai
Awesome
Bhai, Tank pura to bitha deta video khatam karnese pahile
I love KTM BIKE so nice or powerfull