NEW TOOL for the SHOP! ORTUR Laser Master 2 S2
Вставка
- Опубліковано 7 чер 2024
- @ORTUROFFICIAL
@lightburnsoftware7189
MADE THE BEST: www.madethebest.com/?aff=181
This is an introduction video to CNC laser engraving/cutting machines. Made the Best was nice enough to send us the new Ortur Laser Master 2 S2 along with some accessories. They also sent us a rotary roller, air assist pump, and a honeycomb laser bed. There will be affiliate links below for everything in the video.
This is a great route to take to get started in the CNC market. This machine can do more than I can imagine. This video will cover the LightBurn software and testing the laser out. Feel free to leave any feedback or questions in the comments.
Don't forget to SUBSCRIBE and check out the product links.......
MADE THE BEST AFFILIATE LINKS:
Ortur Laser Master 3: www.madethebest.com/collectio...
Ortur Laser Master 2 S2: www.madethebest.com/collectio...
Rotary Roller:bit.ly/38xXa2H
Air Assist Pump: Laser Bed:bit.ly/3Q2KNwuLaser head focusing controller:bit.ly/3x19Gkv
AMAZON AFFILIATE LINKS:
Ortur Laser Master 2 S2: amzn.to/3xUJPdl
Air assist pump: amzn.to/3nixhHQ
micrometer: amzn.to/3NmUK52
Ortur UA-cam page:
/ @orturofficial
Lightburn UA-cam page:
/ @lightburnsoftware7189
Hypothetically if you possibly lost the height measuring tool in a move what would you use instead… asking for a friend.
I want him shirtless too. Equal rights, you know? 😎
Hell ya! I hope they keep sending em. Thanks for watching!
Great informative video. Got the hardware assembled last night and now looking for how to actually make it go. Tips on Lightburn and honeycomb base were invaluable. You've got a new regular fan in me! Thanks!
Thank you for this video, I just ordered this
Thank you very for this video. Extremely grateful
here for the metal plasma cnc. good content
Thanks for checking out the channel. I do have a bit of variety on the channel but i have a ton of cnc videos coming.
I like the new tool! That is a cool laser as well.
Great content
Dude... More toys.
How about engraving rifles? Lower receiver, to be exact.
Ive never done it but you most certainly can engrave them
My stuff is on the way, different machine but those little tips for position...super. Subscribed so I'll be looking for more of my morning coffee videos. Thinking of how I can get my hot Wife to hang around the shop like that as well...
Question, this machine it says does not have a nozzle for air assist. So how did you hook it up to your ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver??
E sure to wipe down the aluminum after the job with some acetone or a magic easer. Makes the engraving pop more
I use just dish soap and microfibre cloth to wipe the aluminium sheet, works well too.
can it cut on clear/transparent acrylic sheets? or at least with the paper masking?
I haven’t tried that material with it. I imagine it would for thinner material. The laser isnt too powerful for the thicker material
I bought this machine today from Microcenter. The drag chain now comes inside the box. Maybe they saw this video and started to include it in the box.
Question? I have a product that is 17 inches long will it work or will the max engraving space be to small
Can it cut acrylic?
It can cut acrylic. Tomorrow morning i have a new laser video coming out. I would check that one out before you decide to purchase the 2 S2. Its on the LM3. Pretty nice machine and its more powerful.
@@SpicerDesignsLLC yessir will definitely check it out
that lightburn program, you showed the Trace image feature. is that something you can do within lightburn and then export that as a DWG to open in Fusion 360 so you dont have to manually trace images for your Plasma Table?
You should be able to. Ive never tried it. I just like making then from scratch. I think the file is better quality that way. But it can be time consuming so that is a good idea to use lightburn. Thanks for the comment!
Using a Snapmaker has taught this 50 yr old dude metric conversions on the fly. 12 inches or less anyway. Lol
are any parts consumables? ie any parts wear out or need to be replaced?
Not that i know of. I would imagine over a long period of time with a lot of use you might just replace the whole laser head. Im not sure on the lifespan of it.
I’m already subscribed, but she can keep telling me to. Lol. Great to see you are getting more cool tools! Turkey sliders 🤢
25 mm to 1 inch
I knooow. Was just messin around. 25.4 Nigel. Ha thanks for the comment and for watching!
Hi. I ordered this -- ARTUR Laser Master 2 Pro S2 . Can you help me which programs I need and where to download ? to work with the tank and make drawings to burn .. can I link to the programs please .
I have all that info in the description. Links for the software.
@@SpicerDesignsLLC Thanks !!!!!!
Don’t assume China will supply you with the correct color of laser glasses. You notice the color of the laser guard is not the same as your green glasses? Hmmm
Never noticed. Thanks for the heads up
Currently I am using a branding iron to apply my logo to hardwood cutting boards and it looks like crap. I would like to laser my logo into cutting board for a cleaner and sharper look. Will this laser cut logos into hardwood?
For sure it will. That is an older laser. I would recommend a newer setup. These lasers are constantly changing. I have some other videos with newer lasers. But the one in this video will do what you need it to do
I need help with the air assist. Mine did not come with a laser module that seems to have an air assist hook up on it. Is there another model of laser module that is set up for air assist?
You can get the air assist separately. It has an attachment that hooks up to your laser head that you can run the air hose to. Thats how the laser in this video is set up.
Wow, you're fast. Thanks for the help.@@SpicerDesignsLLC
thats the old LM2 but not S2. the S2 is the upgrade to the LM2 Pro. even that cylinder roller is the old (3years?) version. just air assist is new
Im not an expert on these laser machines. The model number i have is whats on the machine. Not sure on the roller. Still have to figure that thing out. Thanks for the comment.
How do you get any work done in such a clean shop?
Hah i just have to clean it a lot. Usually the days after work when i dont want to start a project i will spend some time cleaning. Thanks for the comment!
What time during this machine?
25.4mm in an inch
I knoow…. Was just messing around. Thanks for watching!!
Can you engrave glass with this?
I believe that it can. Ive never tried it. I will be doing some leather soon.
Hi Kyle, I have a crossfire pro and a hypertherm 45 very interested in trying to get into making signs love the channel, I'm just not to computer savy and a little intimidated its been sitting hasn't even been fired. Any advice for the quickest easiest way to get this machine up and running! Thanks great videos and nice work and partner!!.😍
Do you have all the software and connections in place? Or do you still have to set up everything? If it makes you feel any better i was terrible with computers until i got into this. I would recommend getting the machine set up and software connected first. You can follow the video tutorials on langmuirs site. Just do a little each night because it can be a little overwhelming. Then download fusion 360 and start getting familiar with the cad tools. Just email me as you have more questions and ill do my best to answer them. Thanks for watching!
@@SpicerDesignsLLC thanks Kyle I'm excited to get it done. I've had this setup for a couple of years even bought a new gaming computer for the high tec software was trying to get the the cad design to cam and a tool path and that's where I'm missing something? I can do a drawing in 360 its just missing something getting it into tool path and to cut? Have THC as well! I will have to go through the tutorials and try to get it figured out! Great channel thanks for your time
@@kevinsabourin5102 after you finish your scetch, turn it into a body. Then go to manufacture. First you have to do the setup option, then the cutting option to get your tool path. There videos should guide you through it
@@SpicerDesignsLLC thank you
The only thing you need to convert from mm to inch or back is to either divide or multiply by 25.4 depending on which conversion you need. 1 inch = 25.4MM
Hah. Thanks for the info. I was just joking about that. Hope you enjoyed the video.
3cm about 1".....so 30mm about 1"......ymmv...ha ha
If you want to get directly to the good stuff, skip to 6:00 minutes!
I dont think that's a business card I think that goes underneath the spacer to allow a bit of wiggle room tho I could be wrong
I ordered them on amazon. They are metal business cards. A couple came with the laser too. They were with the other sample material.
Those are calipers not a micrometer
I know that. I like when people watch a video with good information and try to pick out the one mistake. Micrometer is also used as a general term.
Is made the best legit? Just placed an order and wanna be sure China doesn't infiltrate me lol
Ya they are. They reached out to me to collaborate. They sent me the laser. Pretty easy to work with. The laser is pretty nice too.
@@SpicerDesignsLLC thanks alot! Ordered same laser and even came with the roller 50% off so seemed sketchy lol
@@SpicerDesignsLLC how long you had laser? Still going strong?
@@aaroncasteel4179 ya it works nice. I mostly use it to make logo plates for some of my builds. Then i rivet them on. Ive had a lot of interest in people wanting logo cups. Just havent had the time to mess with it. I plan on making some more videos with it.
@@SpicerDesignsLLC awesome I'll subscribe and keep up man. It's intimidating at first. See when it gets here. Thanks for the vid
"This ridiculous click-bait thumbnail. so sick of this stuff! why do channels keep doing this...
...but maybe she'll show one?" 👀 *click*
When I see people who don't use or even understand metric around machinery, I praise god they don't kill themself doing something stupid. On the topic - this laser is a toy for children, can not use for anything more or less serious aside from cutting Christmas ornaments for yourself. I personally would not take it for free, as it would take up the space lol. I have a 900x600mm 100W CO2 laser and even that machine is somewhat slow for me.
Well apparently you understand jokes even though your the smartest person alive. I do understand the metric system. And for people starting out its a great machine. I highly doubt that a 100 watt co2 machine was your first laser that your learned on. This might be the most ignorant comment I’ve received. This video is clearly for beginners. Sorry you struggled to realize that.
25.4
calipers bro, not micrometers
Bro. Yes the tool is technically a caliper. But a micrometer is any tool that accurately measures components. Its a general term. So i wasn’t wrong for calling it that. Thanks for the comment bro. Bro