Anything you guys want to show us, I'll watch it for sure. Tucker's welding skills are really coming along nicely. It's hard to believe he's still in high school. He's working on becoming a definite asset to the business, that's for sure. Can't wait to see what's next. Take care fellas.
When I hear the grinder(?) in the background, it makes me think of the chainsaw at Possum Lodge on the Red Green show ! Kevin missing a third of those rollers, is like guys using tire foam and not rolling forward to catch the part on the ground that doesn't get foamed.
Tucker’s one heck of a good welder, especially for his age. He may not want to “smile for the camera” but I’d bet he’s got a big smile off camera. He appears to have learned well from you Clint. I know you’re very proud of both Tucker and Hunter.
Awesome job fabricating the rock guards and a textbook installation. Gotta say that plasma table is a game changer. Appreciate you sharing your day with us.😎👨🔧🛠️🇺🇸😇🔧🚜
Watching the plasma cutter operate is amazing. Inputting the specs to do the cutting, impressive. Tucker is a great welder and an asset to the business. Your fabricating skills second to none. And how can we forget the expertise of the painter! Another great video Clint.
At least Tucker was honest,👍, I imagine having a camera stuck in your face would get annoying, but let me say we appreciate your sacrifice Tucker, I think I commented once about Hunter looking so unhappy, it may have been Tucker, I'm not sure, but I hate when people say, "it looks like I almost knew what I was doing",🙄, especially when they're suppose to be good at what they do, CLINT!, all you guys are good at what you do, (even Kevin), thank you ALL for sharing.😉👍
Appreciate all the effort on this project by the entire shop. The Fast Cut performed like I’ve never seen that thick of material in 7 minutes. Thank you all. John
It’s not a lot of welding tucker Remember life is in the perception That’s experience gaining and character building If tomorrow there was a weld off contest that tested duration. You are far above your school peers by having actual real shop experience
The smile is on the inside...when the camera is on, I get it. Tucker welds, cuts, can program the plasma table, sounds like he can do most anything mechanical....you both best be proud...
Awesome craftsmanship. Tucker is an amazing welder. You gents make me cringe crawling on that concrete on your knees. My two fake knees are now aching. :). Great video.
I doubt that there isn’t anything you can’t repair, fabricate, or rebuild Clint. As always, you demonstrate why C & C Equipment is the best used equipment business. I look forward to every video.
I like the fabrication videos, I especially like the time you take to explain why you do something a certain way since most of us aren’t diesel mechanics. I appreciate how you put extra effort into producing a quality finished project.
Man I love when you show fabrication in the shop. I may only work on cars but tips and tricks go a long way. Have a good weekend Mr C and Mrs C. And keep up the good work team. And make sure you have Kevin clean my tools! Lol
That is a sweet looking track loader, nice job of fabricating the rock guards and the paint job was impeccable Kevin. Someone is getting a very nice machine. You should put a smiley face on the inside of the welding helmet so Tucker has a constant reminder to smile a mile man, thanks for the tag along video sir.
Yes would love to see more fabrications. And Tucker did an awesome job welding. Kevin did ok 😉👍. I thought randy did really good , there was one spot in there he was lay down. You got to admire a man who can lay down and still get the job done.😂😂👍The boss did ok too. Keep up the great work guys . I really enjoy watch y'all. Have a great weekend.
I think that all your work is as usual absolutely outstanding from drawing up the plasma cut out plan, plasma operation - so quick, clean and precisely accurate on thick steel!! Excellent fit up requiring no tweaks whatsoever. Brilliant bending and welding work and as usual super paint work from Kevin. Damn right you should all be very proud of your work, congratulations. Dan
I love the fabrication videos - more please! I am amazed at the amazing welding and fab you all do. So entertaining! Oh, and Kevin is not only a great painter/mechanic, he’s also hilarious. 😂
I am always amazed how you guys manufacture what you need to complete the job. The precise metal shaping, welding, painting, and installation is what sets C&C EQUIPMENT apart. Can I get some more VIDEOS (more frequently), please?
Haha, "it was all a good idea until it didn't work" - got to use that line myself, - similar to Spike Millgan "we don't have a plan so what can possibly go wrong?" lol. Another great vid from the team at C&C!
FIRST CLASS WORKMANSHIP!! I worked for a contractor that did everything cheap, fast and poorly designed for several years. I had to quit and start My own company that tried its best to do work like Yours. Your shop is the best I have ever seen. Thanks for posting these videos!! I came by C and C last week at 4:40 and You were all gone for the day. I hope to drop in someday and say Hello..
Tucker's skill level show better each time, really professional welds. Looks like you have a great C&C rock guard design, might have to make a few to keep on the shelf. Thanks for the Friday fun!
The team work and how everything is explained makes the videos very enjoyable. The work ethic and skills the boys are learning is so great to see!!!!!!!
One of my all time favorites of all the ones you have posted. I enjoy seeing any videos you guys post on your shop fabrication jobs keep it up. And I was shocked at the quality of finish that comes off your plasma cutter table
Hello Clinton, fantastic video of C&C teamwork! I have a question I've been wondering about for a while, How old were you when you could weld as professionally as Tucker? His skills are amazing! Kevin works hard to deliver high quality paint finishes to your projects as I've often seen him rubbing fingerprints and such from under heavy equipment where your customers might never see, but Kevin is proud of his contribution and shows it! I'm glad I "SAW" this video.
PS: Kevin is also a pest! Banging a spanner against a metal bin to distract you while you were backing out of the shop. I guess he's too big to spank. :)
Tucker is turning into a pro...You guys do nice work..30 years H.E.T. I know what I'm taking about...love the show nice to see uncle Scott on the shop floor .almost got his hands dirty..maybe he can get his man care back...lol
Tucker - Smile because you got the greatest mom (www.youtube.com/@mrsclinton), don't think about Clinton sticking the camera in your face. Just kidding Mr C&C would love to meet you some day Kevin needs a drive over pit for the Chip Foose finish.
I'm curious Clint, how does Kevin paint the underbelly of these machines? On his back? Just occurred to me, wouldn't a pit in the paint booth make that job a whole lot easier? Great stuff as always. 👍
I'm glad to see that the boss is willing to look like the tin man. I usually get it on my face too. Tucker is building a can do attitude and doesn't even know it yet. Carry on!
They may be using it for demolition. Rock guards help to keep rebar, tin and wood out of rollers when track grinding the debris pile. The wire and cable are different problem.
If I were only 40 years younger, I would beg to work with you guys, even you, Tucker/tacker! Ha Ha. When you were talking welding, it was WAY over my head! I'm so impressed with the lot of you. Kevin is my hero! Woot!!
Keep up the great work, you guys are making it happen. Tucker is welding like a pro and it looks like he’s the go to for C&C. Get that young man a respirator for his helmet. All that smoke going in his helmet won’t do him any good 20-30yrs from now.
We have picked a saw winner, thanks everyone for watching!!
Anything you guys want to show us, I'll watch it for sure. Tucker's welding skills are really coming along nicely. It's hard to believe he's still in high school. He's working on becoming a definite asset to the business, that's for sure. Can't wait to see what's next. Take care fellas.
Keep it going guys 😂 from Phill and Sarah Parnham from New Zealand west coast
Nice to see anti-seize being used !! The next guy that has to remove those bolts will sure thank you !!!
Wow!!! That was amassing. 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Tucker is the Mona Lisa of youtube.
😂😂
I don't think Mona Lisa could weld. Lol.
When I hear the grinder(?) in the background, it makes me think of the chainsaw at Possum Lodge on the Red Green show ! Kevin missing a third of those rollers, is like guys using tire foam and not rolling forward to catch the part on the ground that doesn't get foamed.
Tucker’s one heck of a good welder, especially for his age. He may not want to “smile for the camera” but I’d bet he’s got a big smile off camera. He appears to have learned well from you Clint. I know you’re very proud of both Tucker and Hunter.
And Mason!
Yes he is, awesome!!
I love a man that overcomes any adversity
Awesome job fabricating the rock guards and a textbook installation. Gotta say that plasma table is a game changer. Appreciate you sharing your day with us.😎👨🔧🛠️🇺🇸😇🔧🚜
I can watch smart people work all day. Doesn’t matter what new things you come up with.🤙🏼
Tucker does a good job, smiling or not. Great job to all 👌
Loving the fabrication. That's just wow! More please!
Watching the plasma cutter operate is amazing. Inputting the specs to do the cutting, impressive. Tucker is a great welder and an asset to the business. Your fabricating skills second to none. And how can we forget the expertise of the painter! Another great video Clint.
At least Tucker was honest,👍, I imagine having a camera stuck in your face would get annoying, but let me say we appreciate your sacrifice Tucker, I think I commented once about Hunter looking so unhappy, it may have been Tucker, I'm not sure, but I hate when people say, "it looks like I almost knew what I was doing",🙄, especially when they're suppose to be good at what they do, CLINT!, all you guys are good at what you do, (even Kevin), thank you ALL for sharing.😉👍
Appreciate all the effort on this project by the entire shop. The Fast Cut performed like I’ve never seen that thick of material in 7 minutes. Thank you all. John
Excellent job, Tucker. Very well done. Looks great.
I loved the tap tap tap at the end. Great work. I thought Tucker smiling just from under the helmet was great.
I can understand Tucker's dislike of having a camera stuck in his face. He seems like he's a nice young man, despite Kevin's bad influence. 🤣
Hello from New Zealand! You make it enjoyable to watch dudes the added humor is your ace!!
I always enjoy the fab stuff - almost as good as heat & beat
Fabulous Kevin and Tucker welding make good product.
Tucker and Kevin are quality minded workers.
Tucker does the kind of welding a man with 20 years experience does , very good young man ! You have done a good job raising your boys Clint . Saw
It’s not a lot of welding tucker
Remember life is in the perception
That’s experience gaining and character building
If tomorrow there was a weld off contest that tested duration.
You are far above your school peers by having actual real shop experience
The smile is on the inside...when the camera is on, I get it. Tucker welds, cuts, can program the plasma table, sounds like he can do most anything mechanical....you both best be proud...
Tucker is doing very well with his welding! Kevin is an “artist” with his paint gun. Quality work coming out of C&C!
Tucker did a great job on the welding and I really enjoyed the fabrication part which is rewarding when everything goes to plan.
Tucker you are becoming a master welder. Thank you for sharing this video. Kevin you always do a wonderful job!😊
Sausage Fingers is the man!
Good job Tucker, Kevin, Randy. And yes you too Mr Clint. 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻😘
Great Plaza Cutter, with Great Input Information, Tucker was a great input person. Saved a lot of time.
Sweet job on the rock guards!!
Awesome craftsmanship. Tucker is an amazing welder. You gents make me cringe crawling on that concrete on your knees. My two fake knees are now aching. :). Great video.
Me too. Hips and knee's replaced in 09
always enjoy watching professional fabrication. Tucker's welding is extremely well done!
Was just going into Studio ,,,and ,,C&C pops up ...lol..perfect ,,Coffees on!!;-)!! Cheers!;-)!!!
I doubt that there isn’t anything you can’t repair, fabricate, or rebuild Clint. As always, you demonstrate why C & C Equipment is the best used equipment business. I look forward to every video.
I like the fabrication videos, I especially like the time you take to explain why you do something a certain way since most of us aren’t diesel mechanics. I appreciate how you put extra effort into producing a quality finished project.
Tucker is a good welder and Kevin is a funny person and a good painter
Man I love when you show fabrication in the shop. I may only work on cars but tips and tricks go a long way. Have a good weekend Mr C and Mrs C. And keep up the good work team. And make sure you have Kevin clean my tools! Lol
Like a factory fit. 👍👍👍👍
Saw...I'll take the saw for sure! Tucker does an outstanding job with his welding!! I always enjoy the fabrication videos, thanks.
Kevin's thinking man I wish my paint jobs could just stay nice n pretty....Great Job Kevin and the boys at C&C Great Vid👍👍👍👍👍👍👍👍
Great job tucker !!! And Kevin has cat called yet? Cause your painting blows cats guys out of the water!!!
Great video Clint. Tucker did excellent work welding. Kevin's paint work is good as factory. Thanks again. Have a great weekend.
Sausage Fingers couldn't be a proctologist - his patients would fearful 😮
That is a sweet looking track loader, nice job of fabricating the rock guards and the paint job was impeccable Kevin. Someone is getting a very nice machine. You should put a smiley face on the inside of the welding helmet so Tucker has a constant reminder to smile a mile man, thanks for the tag along video sir.
Nice band saw y’all put out nice videos. Appreciate you all. God bless and have a wonderful day.
Yes would love to see more fabrications. And Tucker did an awesome job welding. Kevin did ok 😉👍. I thought randy did really good , there was one spot in there he was lay down. You got to admire a man who can lay down and still get the job done.😂😂👍The boss did ok too. Keep up the great work guys . I really enjoy watch y'all. Have a great weekend.
Sausage Fingers - how do you find gloves that fit properly?
Fabulous Fabricating Folks
I think that all your work is as usual absolutely outstanding from drawing up the plasma cut out plan, plasma operation - so quick, clean and precisely accurate on thick steel!! Excellent fit up requiring no tweaks whatsoever. Brilliant bending and welding work and as usual super paint work from Kevin.
Damn right you should all be very proud of your work, congratulations. Dan
Tucker has an awesome dad !!! I wish my father ways as cool as Clint
I love the fabrication videos - more please!
I am amazed at the amazing welding and fab you all do.
So entertaining!
Oh, and Kevin is not only a great painter/mechanic, he’s also hilarious. 😂
I am always amazed how you guys manufacture what you need to complete the job. The precise metal shaping, welding, painting, and installation is what sets C&C EQUIPMENT apart. Can I get some more VIDEOS (more frequently), please?
Haha, "it was all a good idea until it didn't work" - got to use that line myself, - similar to Spike Millgan "we don't have a plan so what can possibly go wrong?" lol. Another great vid from the team at C&C!
I SAW what you did there and it was awesome.
I SAW what you did here Clinton!!! As always thank you for bringing us along on your journey!!!
saw. Kevin needs a pit in his paint booth so he can get the bottom easier .
Such a great hands on education Tucker is receiving working with Dad in the shop!
FIRST CLASS WORKMANSHIP!! I worked for a contractor that did everything cheap, fast and poorly designed for several years. I had to quit and start My own company that tried its best to do work like Yours. Your shop is the best I have ever seen. Thanks for posting these videos!! I came by C and C last week at 4:40 and You were all gone for the day. I hope to drop in someday and say Hello..
You and your crew shine like the Fast Cut awesome work 👍👋🇨🇦
Clint, thanks for all the hard work you do calling the big shots. You're a great leader and own it well.
Saw Kevin paint and Tucker weld both did awesome work!
That makes for good viewing Clinton. You have a good bunch of guys there with you, keep showing them off to us.
Nice job guys.
Love the video Clint , Tucker , Kavin .and your teams you make very good video .
Saw. Great work on the 755 and getting Tucker to smile. I like the fabrication jobs you do.
Clint, you have two great sons! If only Tucker would smile😂!
Tucker's skill level show better each time, really professional welds.
Looks like you have a great C&C rock guard design, might have to make a few to keep on the shelf. Thanks for the Friday fun!
Y’all did a phenomenal job on this. Tucker is doing a great at job at welding,
Tucker is part of a great tack team. He's tacking along and says "thatsalotofweldin" a lot... 😁🤟
The team work and how everything is explained makes the videos very enjoyable. The work ethic and skills the boys are learning is so great to see!!!!!!!
Great job Guys, the plasma cutter is a great piece of kit, the finish is superb. The Teams fabrication skills also are 5 *****. Thank you for posting.
One of my all time favorites of all the ones you have posted. I enjoy seeing any videos you guys post on your shop fabrication jobs keep it up.
And I was shocked at the quality of finish that comes off your plasma cutter table
Great build everyone. Mr. Tucker is awesome on that welder. I always enjoy watching.
Certainly look good on there, you all did a nice job. If Tucker's GF was there he would be smilin all the time, lol. Nice paint job Kevin
Awesome job Tucker, you are a great welder and fabricator for your age.
I am impressed! That looked like a finger smashing exercise of the highest order. And it looks like all scaped unscathed!
SAW!
Dam good job guys good welding job tucker
Ahhh yes. The things you can make when you have the right equipment and manpower. Awesome job on the rock slides Clint, Tucker & Kevin.
Just love your fabrication work!!! Is there anything you can't fabricate??
Hello Clinton, fantastic video of C&C teamwork! I have a question I've been wondering about for a while, How old were you when you could weld as professionally as Tucker? His skills are amazing! Kevin works hard to deliver high quality paint finishes to your projects as I've often seen him rubbing fingerprints and such from under heavy equipment where your customers might never see, but Kevin is proud of his contribution and shows it! I'm glad I "SAW" this video.
PS: Kevin is also a pest! Banging a spanner against a metal bin to distract you while you were backing out of the shop. I guess he's too big to spank. :)
I started earlier then him but we did not have a wire feed machine for a long time so I learned to stick weld
@@dansbrown1313 Its not that Kevin is too big to spank, its the fact that he likes it too much and it just ends up getting weird i think!! LOL
ANOTHER GREAT EPISODE!!!.MAKE IT RIGHT BEFORE YOU SHIP IT OUT 👏 👌 CLINT THOSE BOYS OF YOURS WILL ONE DAY BE MASTERS IN THIS FIELD 👍 😉.
Well done.
Tidy job again guys ! The new cutting table seems to be working well [thanks to Tuckers programming ] Keep the videos coming loving the content !
never fail to amaze paint looks factory super job thanks boys
Tucker is turning into a pro...You guys do nice work..30 years H.E.T. I know what I'm taking about...love the show nice to see uncle Scott on the shop floor .almost got his hands dirty..maybe he can get his man care back...lol
Great video. Glad you are teaching your boys a trade
Tucker - Smile because you got the greatest mom (www.youtube.com/@mrsclinton), don't think about Clinton sticking the camera in your face. Just kidding Mr C&C would love to meet you some day Kevin needs a drive over pit for the Chip Foose finish.
Saw rob
That link doesn’t work for me
You should get Tucker a positive pressure welding mask so he can still breath when he is 40.
He has one now
SAW !!!! Well done guys.. great job tuck
Saw.
Oh and tell Kevin "runs don't rust". And I like "Tacker Tucker" hope it sticks. lol
I'm curious Clint, how does Kevin paint the underbelly of these machines? On his back? Just occurred to me, wouldn't a pit in the paint booth make that job a whole lot easier? Great stuff as always. 👍
He takes the belly pans off
That was a mighty fine piece of fabrication, Mr. Clint.
I'm glad to see that the boss is willing to look like the tin man. I usually get it on my face too.
Tucker is building a can do attitude and doesn't even know it yet. Carry on!
Love the fabrication videos. Great job Tucker welding Clint plasma-ing and Kevin painting.
They may be using it for demolition. Rock guards help to keep rebar, tin and wood out of rollers when track grinding the debris pile. The wire and cable are different problem.
If I were only 40 years younger, I would beg to work with you guys, even you, Tucker/tacker! Ha Ha. When you were talking welding, it was WAY over my head! I'm so impressed with the lot of you. Kevin is my hero! Woot!!
Saw! A guy could use a saw…keep up the awesome content gents.
And another professionally completed project. Great job men!
Looks factory, great job Tucker and Kevin....love the fab videos.
The plasma table makes some nice cuts. The guards look great!
Keep up the great work, you guys are making it happen.
Tucker is welding like a pro and it looks like he’s the go to for C&C. Get that young man a respirator for his helmet. All that smoke going in his helmet won’t do him any good 20-30yrs from now.
nice to see how you take good care of your customers🥰🥰