I have the exact same setup at home - I am not an audiophile and honestly, I am not sure I feel too much difference, but would you say it really does? Did you also make the 'height' as instructed? I never understood what that was about. Thank you in advance if you care to help me with an honest answer!!! :)
@@andreid.9105 Dolby Atmos provides two height audio channels that provide sound above the listening area to expand the sound stage beyond the horizontal plane. The height adjustment increases or decreases the volume of the height audio channels. This allows for greater immersion with Dolby Atmos audio, especially in movies.
Thank you Pete! You saved my system. I tried the demo and I was not getting the rear surround and rear height channels on the era 300. I investigate and found that a easy solution is to remove the era from the system and adding again. Now it is working and a huge difference. Very happy
I keep getting the same issue. When remove surround and add them again it works, but when I try next day the rear hights don't work and just come from the arc instead. Are you getting same issue?
Thank you Pete! Tip coming your way related to the Dolby Test sound. I was unaware of that and we listened to it after doing TruePlay again. Our system sounds much more balanced now.
Thank you Pete! 😃 I found your channel recently and really appreciate your work to provide content that is helpful, detailed and entertaining. The information you provide with evaluation and settings has improved my soundstage dramatically. I also must say I really do appreciate that you put the settings info right at the start. I find it much easer to find and I can review that right away when time is limited and then come back later to watch the full video, which I have done. I always look forward to your content, thank you very much for your hard work! Cheers! 👍
Thank you Pete...These settings are perfect!!! Certain times I might have to lower the sub level at night (apartment living 👎👎👎) but can't wait to bring it up when I move. 😊
Hey Pete I’m De in United States I love my sumos surround set up arc two subs and 300’s for surround and I also use soon amp an two paradigm tower speakers in the front when they play at the same time it enhances my sound so much and I get no delay in the sound my movies and music sound so grand I appreciate your videos keep up the good work.
Thank you Pete! I always appreciate the work you put into providing us informative content. Look forward to your in depth review of the new software interface coming out!
I have a similar setup except for I have 2 subs, sub 3 and a sub 2. I tried the settings that he recommend and I wasn't feeling that bass and vibration that I'm used to. Bass +5 Treble+3 Loudness - On TV level +10 Music +9 Music playback-full Height+5 Volume limit-off Spatial music-on Try this out and tell me your thoughts.
Thanks Peter. Just a heads up, I am able to play the Atmos demo through the Apple Music app if I go to the Apple Music app on my Apple TV 4K directly (not via airplay). I have an LG C1 OLED and the Arc, sub x2, era 300 for reference. It’s always worked for me that way and does play all of the channels individually. **edit** and thank you for the Atmos on/off video download. Pretty awesome stuff!
Am I the only one with the ultra and a pair of era 100s , having problems with not feeling fully immersed, please any advice to fix this thank you 🙏🏼 the arc ultra seem to be too strong 🤷🏻♂️🤷🏻♂️
Thank you Pete!! Previously you shared best settings which differ from settings shared in this piece. Is there objectively in association with a flat response or do you recommend to simply use the setting that is subjectively pleasing? FYI, I changed my sub (duel) setting from -2 to +3 and I hear a marked improvement.
Hi Peter, noticed that the ERA 300s are angled toward the main listening position instead of facing forward, would you recommend that now? (vs. what you showed in your other videos)
Thank you Pete! I tried to make the 7.2 test work with Apple TV weirdly it doesn’t work in Dolby Atmos …really has to be through the app like you said, weirdly I can listen to Dolby atmos music through Apple TV and my LG C1 to the Arc but that test code doesn’t work unless I use the app
Great video Peter, like always. I have a question about playing music on a full Sonos surround with Arc, Sub Gen 3, and Era 300s. When I play an Amazon music song most of the sound comes out between the left front and rear, not much from the right side. Do you have any ideas about how to get a more balanced sound. Thanks
What a great video!! How do you suggest we play the PeterPee Atmos Demo videos on our TV system once downloaded? Do we need a computer hooked up to our TV Sonos System via HDMI in order to play these demo videos? Is there any way to access those videos on Apple TV?
Danke Pete. You are listening to setting of 50% Volume and +6 sub? Sure your ears are still working fine. If I set my Sonos set on 35% loudness my ears start hurting. And thats just 50 to max. 70 dB. Depends on what is loudess scene in the movie.
Hi Peter, love your info. Question, at the studio , all channels were played individually as a test of all speakers. How was that done. Can that be added to the Sonos app? Just wondering. Thanks in advance.
I’m wondering if they pulled the magnet on the wall mount, just pulled mine out and everything that pissed me off for the last year went away. Now sounds full and can actually hear voice.
So why do the height channel test placements only work through the sonos app? But when using the Apple Music on AppleTV 4K, it plays all except the height channels?
Hi Peter, do you have a solution regarding running true play with the era 300 as surrounds with the arc and sub gen3? Apparently, there is a known bug with the latest 80.x app version. A lot of ppl are unhappy as seen in the Sonos Community forum. Do you have this issue as well? Do you know what the fix is? I am really frustrated with this. Just bought the era 300 to replace my old Sonos ones and now the sound is worse with my era 300 than my Ones. Please help. Thank you for all your content
Hi Peter. Firstly, thank you for all the great videos ! I have a quick question if I may, I have Sonos set up consisting of an Arc soundbar, 2 Era 300 surrounds, and 2 Gen 2 Subs. Everything sounds great (all settings I took from you by the way) however I have an intermittent issue with the HDMI connection on the soundbar. It’s very loose and temperamental, to the point where if the subs are set to loud even the vibration from them can cause disturbance with the connection. There are quite a few mentions of this happening online, but no one has yet been able to provide a solid fix. Wondered if you had any recommendations?
Thank You Peter! Looking forward to seeing a revised ultimate Arc + 1 Sub Gen 3 + 2 Era 300 setup!
Are you able to share the best EQ for this setup @peterpee
Any update?
Yes please!!!
Come on Peter!!
Any update?
These settings were game changer!!! Even for a setup including the arc, 1 sub and 2 Sonos one’s.
I have the exact same setup at home - I am not an audiophile and honestly, I am not sure I feel too much difference, but would you say it really does?
Did you also make the 'height' as instructed? I never understood what that was about.
Thank you in advance if you care to help me with an honest answer!!! :)
@@andreid.9105 Dolby Atmos provides two height audio channels that provide sound above the listening area to expand the sound stage beyond the horizontal plane. The height adjustment increases or decreases the volume of the height audio channels. This allows for greater immersion with Dolby Atmos audio, especially in movies.
I'm just here to say your thumbnail picture for this video is friggin' hilarious. Funny sense of humor Mr. Pee.
Thank you Peter. I bought the complete set of Arc, sub and era 300 just last Saturday!!! It’s just amazing!!
Thank you Pete! You saved my system. I tried the demo and I was not getting the rear surround and rear height channels on the era 300. I investigate and found that a easy solution is to remove the era from the system and adding again. Now it is working and a huge difference. Very happy
I keep getting the same issue. When remove surround and add them again it works, but when I try next day the rear hights don't work and just come from the arc instead. Are you getting same issue?
Thank you so much Peter. You are definitely the Sonos King. You’ve helped me take my system to another level.
I can’t wait for your suggestion with the Sonos Arc Ultra and sonos 300
Thank you Pete! Looking forward to your video about the new app when the sonos app update 2.0 will drop
Thank you Pete! Tip coming your way related to the Dolby Test sound. I was unaware of that and we listened to it after doing TruePlay again. Our system sounds much more balanced now.
Thanks Peter, now makes my Arc, 2 x fives as rear surrounds and 2 x gen 3 subs sound awesome !! 👊🏻
What’s the best settings for ARC,2 Era 100’s, sub Gen 3?
I made the suggested changes and my system with the Arc, Gen 3 sub & ERA300s as surrounds sounds absolutely awesome. Thanks
Peter looking forward to your video testing flagship store settings vs your settings and final recommended settings.
Thank you Pete! 😃
I found your channel recently and really appreciate your work to provide content that is helpful, detailed and entertaining. The information you provide with evaluation and settings has improved my soundstage dramatically. I also must say I really do appreciate that you put the settings info right at the start. I find it much easer to find and I can review that right away when time is limited and then come back later to watch the full video, which I have done. I always look forward to your content, thank you very much for your hard work! Cheers! 👍
Thank you Peter!! You make great videos and i just bought my first Sonos system- Arc+ 1 Sub Gen 3 + 2 Era 300
YES… Can’t wait until Friday when I have the house to myself!!!
What's your go-to songs / movies?
Thank you Peter, looking forward to your video for best seethings Sonos arc+ era 300 without sub
Thank you Pete. I don’t have two Subs but applied the new settings to my Arc plus Sub and 2 x One SL system.
Thank you Pete. Like watching yr video. Just brought the sono arc, sub and era 300.
Thank you Pete...These settings are perfect!!! Certain times I might have to lower the sub level at night (apartment living 👎👎👎) but can't wait to bring it up when I move. 😊
Why lower the sub and not just enable night mode?
Pete Thank you! Love it that you Value our time. Appreciate it.🤙🏽
Another great video and the Dolby atmos test extremely useful.
Wow. These settings made a huge improvement. Thank you!
Hey Pete I’m De in United States I love my sumos surround set up arc two subs and 300’s for surround and I also use soon amp an two paradigm tower speakers in the front when they play at the same time it enhances my sound so much and I get no delay in the sound my movies and music sound so grand I appreciate your videos keep up the good work.
Thank you Peter from Sydney Australia. Really appreciate your videos. Take care.
Thank you Pete! Your content is always informative and well-explained
Amazing Pete!
Love the summary at the beginning.
Thank You Pete. Your reviews are incredible
Thank you Pete! I always appreciate the work you put into providing us informative content. Look forward to your in depth review of the new software interface coming out!
😂😂😂 Pete you out of control for that thumbnail
lol
Thanks buddy... from 🇹🇹 (Trinidad & Tobago)
Thank you Peter..I noticed a big difference with these settings
A big “thanks mate” from Sydney. Appreciate your work!
Thank you Pete. I have this exact setup. It is phenomenal. You have helped me tremendously 😊
Thank you so much Peter. Always look forward to your videos.
Thanks Peter; succinct and valuable input as always. Much appreciated!
Thank you, Pete! Super useful information as always!
Dziękuję za Twoją Pracę !!! Odezwę się po rekomendacje do ustawiania zestawu dziękuję
Thanks Sir Pete! Cannot wait to install sonos in my new HDB resale flat.
Just set this up with Arc,sub3 and duo ONE SL….so far really good👌
I have a similar setup except for I have 2 subs, sub 3 and a sub 2. I tried the settings that he recommend and I wasn't feeling that bass and vibration that I'm used to.
Bass +5
Treble+3
Loudness - On
TV level +10
Music +9
Music playback-full
Height+5
Volume limit-off
Spatial music-on
Try this out and tell me your thoughts.
Excellent work as always Peter!
Thank you Pete. Keep making awesome videos.
THANK YOU Pete !!! San Francisco Nice videos you do..Also been nice to know speaker placements and measurements,angles of rears etc
Peter, what settings would you modify for Arc, Sub gen 3, and 2 surround Era 300? Thank you in advance.
Thank you, Pete........... love your content!!!
Thank you for your the information. I have been looking for a good demo track.
Thank you for your continued advice and help!!
Thank you! This was extremely helpful.
Thanks Peter! Great information! I’ll try it out, just one sub short.
Thank you Pete! I always appreciate your videos.
Thank you Pete, love your content!
Thank you very much for your time and good work Pete
Thank you Pete! Looking for setting Arc, Sub Gen 2 and Sonos Ones. Cheers
Great video and information Peter.
Looking forward to tweaking my settings and comparing them with your orginals. Only one sub unfortunately.
Thank you as always, Pete!
What do you think about you’re old opinion to keep height at +10 since it doesn’t change the sound profile mich
Thanks Peter. Just a heads up, I am able to play the Atmos demo through the Apple Music app if I go to the Apple Music app on my Apple TV 4K directly (not via airplay). I have an LG C1 OLED and the Arc, sub x2, era 300 for reference. It’s always worked for me that way and does play all of the channels individually. **edit** and thank you for the Atmos on/off video download. Pretty awesome stuff!
Am I the only one with the ultra and a pair of era 100s , having problems with not feeling fully immersed, please any advice to fix this thank you 🙏🏼 the arc ultra seem to be too strong 🤷🏻♂️🤷🏻♂️
Appreciate this and all your videos.
Thank you very much, Peter!
In Arabic language:
شكرا جزيلا ، بيتر !
Thank you Peter but what about the surround Full or Ambient?
Thank you Pete from Toronto, Canada
Danke Peter! Works perfect!
Instead of era , I have two SL , what is the best setting I need to change also what should be the surrounding mode should be ambient or full?
Thanks Pete from St. Catharines Canada!
THANK YOU! Love your videos. ❤
my exact setup notice a difference, thank you
Doesn’t loudness shrink the dynamic range by bringing up the quiet lows to be louder, meaning the loud lows will be more similar to the quiet lows?
Thank you Peter, good work.Ted
What is the best height setting for the Arc alone. I’m 6 feet away from the bar and 8 ft from ceiling
Thank you Pete from San Francisco!
please suggest best settings for Sonos arc + 1 gen 3 sub + 2 era 300. Thank you
Peter - when Sonos decide to allow us the USER to control the ERA300 front speaker. Thank you Peter
At least in Music Mode via Sonos App they should leave US the Chance.
Are these revised settings also good for just 1x sub? I’ve got the arc + sub gen 2 + era 300’s setup
Thank you Pete!! Previously you shared best settings which differ from settings shared in this piece. Is there objectively in association with a flat response or do you recommend to simply use the setting that is subjectively pleasing? FYI, I changed my sub (duel) setting from -2 to +3 and I hear a marked improvement.
Hi Peter, noticed that the ERA 300s are angled toward the main listening position instead of facing forward, would you recommend that now? (vs. what you showed in your other videos)
Thank you Pete! I tried to make the 7.2 test work with Apple TV weirdly it doesn’t work in Dolby Atmos …really has to be through the app like you said, weirdly I can listen to Dolby atmos music through Apple TV and my LG C1 to the Arc but that test code doesn’t work unless I use the app
Great video Peter, like always. I have a question about playing music on a full Sonos surround with Arc, Sub Gen 3, and Era 300s. When I play an Amazon music song most of the sound comes out between the left front and rear, not much from the right side. Do you have any ideas about how to get a more balanced sound. Thanks
What a great video!!
How do you suggest we play the PeterPee Atmos Demo videos on our TV system once downloaded?
Do we need a computer hooked up to our TV Sonos System via HDMI in order to play these demo videos?
Is there any way to access those videos on Apple TV?
Danke Pete. You are listening to setting of 50% Volume and +6 sub? Sure your ears are still working fine. If I set my Sonos set on 35% loudness my ears start hurting. And thats just 50 to max. 70 dB. Depends on what is loudess scene in the movie.
Hi Peter, love your info. Question, at the studio , all channels were played individually as a test of all speakers. How was that done. Can that be added to the Sonos app? Just wondering. Thanks in advance.
Hello Peter. Do you have settings for the arc+gen3 sub. I’m about 6ft from the arc. Thank you in advance
hey pete, does this settings also count for just the ultra arc and sub?
Thanks a bunch, Pete! 👍🏼
Thank you Pete!!
Gracias Pete!!
Thank you Pete.
Love your hair.
I’m wondering if they pulled the magnet on the wall mount, just pulled mine out and everything that pissed me off for the last year went away. Now sounds full and can actually hear voice.
So why do the height channel test placements only work through the sonos app? But when using the Apple Music on AppleTV 4K, it plays all except the height channels?
Thank you Pete from Salt Lake City
What about speech enhancement with these settings? On or off for optimum sound?
Hi Peter, do you have a solution regarding running true play with the era 300 as surrounds with the arc and sub gen3? Apparently, there is a known bug with the latest 80.x app version. A lot of ppl are unhappy as seen in the Sonos Community forum. Do you have this issue as well? Do you know what the fix is? I am really frustrated with this. Just bought the era 300 to replace my old Sonos ones and now the sound is worse with my era 300 than my Ones. Please help. Thank you for all your content
Thanks Pete! One question though…is it advisable to use speech enhancement like you recommended in you last best settings-video?
Hi Peter. Firstly, thank you for all the great videos !
I have a quick question if I may, I have Sonos set up consisting of an Arc soundbar, 2 Era 300 surrounds, and 2 Gen 2 Subs. Everything sounds great (all settings I took from you by the way) however I have an intermittent issue with the HDMI connection on the soundbar.
It’s very loose and temperamental, to the point where if the subs are set to loud even the vibration from them can cause disturbance with the connection.
There are quite a few mentions of this happening online, but no one has yet been able to provide a solid fix. Wondered if you had any recommendations?
Nice one Peter
Heel erg bedankt Peter!
2 hours ago
Thank You Peter!
Hi Peter. Quick question. I'm assuming you do True Play first before adjusting the settings? Just curious.
Danke schön Pete!
Ty Peter! Should we hold off on updating the sonos app? Ive been hearing terrible reviews for it
Hang on first. I am still testing out. Sorry have been busy at work. But I am spending the next 24 hours intensively trying to test this out.
@PeterPee no problem, I appreciate your time and efforts!
I’m not Peter but my advice is don’t update.
@@butinsho7585 thanks man
Thank you, Pete! 👍🏼😀