I've heard a fair amount of Bykski leaking. I am build a new hard tube EK system now and would like to add one of these. They at least look very cool. Have you had any issues with yours? Do you leave your rig on 24/7? Thanks!
Hi I am still using the cpu wb from. Bykski you see in my video review in the channel, a barrow pump and this flow meter and never had any leaks in years. I am anyway using soft tubing as you see. I run my rig about 8/10hrs a day
I have this product Just shows temperature, water flow speed and revs per second. If by chance your water pump runs below a specific revs there is an annoying flashing ALERT screen. Any true PC water cooling enthusiuast will NOT like this feature. Abysmal
Thanks for your review. I thought mine was defective being so noisy, but now I know for sure it's just the design of the product. I will have to buy one that monitors temperature only.
I think in the video it's quite clear that it's a normal Molex ? It should be quite easy. You can also check the product links i posted in the description
@@fgtechtips no it does not. i m talking about the small connector not the molex. and the product page has nothing regarding the cable type. even the support representative is clueless after i have emailed them
It looks like your water flow is insufficient. The only alarm i get is when the water pump gets accidentally disconnected and therefore there is no water flow
@@digitallantern593 A d5 pump will have a maxinum flow rate of 26 l/m just by itself. After your loop is finished you should aim for a flow rate of ~3.7 l/m. Anything restrictive in your loop will lower that. Your flow rate is low, you must have a lot of things in your loop.. quick disconnect fittings are a big flow rate killer.
Non proprio un gadget ma lo ritengo uno strumento di vitale importanza. Innanzitutto è l'unico strumento che ti permette di misurare e visualizzare in tempo reale la termerarura del liquido di raffreddamento e la velocità del suo flusso all'interno del loop. Ma soprattutto utilissimo l'allarme integrato che mi ha salvato un paio di volte quando avevo inavvertitamente staccato l'alimentazione della pompa
@@fgtechtips se fossimo stati nel 2010 ti avrei dato ragione a mani basse, ma da qualche anno ormai le pompe sono pwm e hanno quantomeno il sensore tachimetrico, si possono collegare direttamente alla scheda madre e sono anche modulabili - persino la mia laing dcc che ha una corrente di spunto di 2A: imposti l'allarme direttamente da BIOS e non hai bisogno di altro. La temperatura? Alcune schede madri hanno dei connettori per collegare una o più sonde termometriche. Le info sul flusso sono relative... Se quest'affare avesse avuto che ne so, un connettore USB per collegarlo alla scheda madre ed ottenere le info almeno sulla temperatura su smbus, allora sarebbe stato in parte utile, perché modulare le ventole in base alla temperatura del liquido è una cosa intelligente da fare. Oltretutto ti dirò la verità: schermino OLED? Considerando il tempo che sta acceso mediamente, Vedrai tra meno di un anno o due se non soffrirà di ghosting...
@@ThomasWinders forse non hai visto che il video è del 2021, lo schermo è perfetto come il primo giorno. La mia pompa è ovviamente pwm ma anche con controllo e regolazione manuale ma non è quello il punto. È sicuramente più comodo vedere tutto in un unico dispositivo direttamente all'interno del case piuttosto che montare sonde separate, usare software di monitoring eccetera eccetera. Discorso diverso se non ti interessa sapere la temperatura del liquido né la velocità del flusso oppure hai il case per terra o non a vista, puoi sicuramente farne a meno. Cmq utilissimo anche nel 2024 fidati ;)
@@fgtechtips dagli ancora qualche tempo, gli oled fanno tutti quella fine specialmente quelli che mostrano sempre la stessa immagine (parlo per esperienza). È un gadget ed è anche carino da vedere, anche se leggere i dati su un display da 2" non è il massimo. E ad onoor del vero il tuo video l'ho trovato perché cercavo una recensione del prodotto, a cui ero interessato. La sicurezza la fai da bios a priori, poi puoi aggiungere per estetica quelli che vuoi... L'unica nota positiva di questo gadget è che non costa un rene, come solitamente fanno gli articoli in fascia enthusiast, ma 30€ è abbastanza onesto come prezzo.
In realtà sbagli, il ghosting non c'entra niente, al limite il problema degli OLED è il burn in, se ti informi sulle TV ad esempio capirai meglio cosa intendo ;) si cmq per questo prezzo stracciato lo trovo stra utile, dopo 3 anni è ancora perfetto
How would you use this to adjust fan curve based on coolant temperature. Is there a plug into T-sensor? Or would you need a stop plug with temperature sensor for that as well
I have this product Just shows temperature, water flow speed and revs per second. If by chance your water pump runs below a specific revs there is an annoying flashing ALERT screen. Any true PC water cooling enthusiuast will NOT like this feature. Abysmal
I never got the alert so far but my pump goes to a minimum of 2lt/min. I got the alert only when the pump was disconnected so I think you have an issue in your loop
Let me know below if you guys own one and can you confirm it's noisy at max pump speed
I've heard a fair amount of Bykski leaking. I am build a new hard tube EK system now and would like to add one of these. They at least look very cool. Have you had any issues with yours? Do you leave your rig on 24/7? Thanks!
Hi I am still using the cpu wb from. Bykski you see in my video review in the channel, a barrow pump and this flow meter and never had any leaks in years. I am anyway using soft tubing as you see.
I run my rig about 8/10hrs a day
@@fgtechtips Great! Thank you
I have this product Just shows temperature, water flow speed and revs per second. If by chance your water pump runs below a specific revs there is an annoying flashing ALERT screen. Any true PC water cooling enthusiuast will NOT like this feature. Abysmal
not noisy
Mine is noisy when it pasts 3.6 Lt per hour, otherwise it's silent
How doas the Alarm works? Is it aucustic?
No acustic just display, it's so small I guess there's no space for a speaker
I have 20 noctua industrial 3000rpm fans... I don't think noise will be an issue...🤣
Right 😅
This is the worst flow meter ever bought this only thing i get is ALARM while its put on the right way turned it and i also get alarm.!
Might be defective, mine is still working fine and no alarm unless i turn off the pump
Thanks for your review. I thought mine was defective being so noisy, but now I know for sure it's just the design of the product. I will have to buy one that monitors temperature only.
The noise starts from about 3.6 l/hour in my case
Would using this reduce my flow rate with it on vs with out it?(or any flow meter) Would i have to increase the pump speed to compensate?
Not at all
Mine is at 03.8/M is it fine for a big cabinet thermaltake p8 with D5 barrow pump
Thank you. Iam gonna buy 2
Thanks for watching !
Is Bitspower’s flow indicator any good?
I don't know that one sorry
what type of connector does the flow meter have? i broke the cable on mine and cant figure out the connector type so i can repair it.
I think in the video it's quite clear that it's a normal Molex ? It should be quite easy. You can also check the product links i posted in the description
@@fgtechtips no it does not. i m talking about the small connector not the molex. and the product page has nothing regarding the cable type. even the support representative is clueless after i have emailed them
@@LQ-gaming as far as I know it's just 2 small cables that go to an ordinary Molex.....
@@fgtechtips no they are not. there is a custom JST connector type inside that i can t find on the regular market
@@LQ-gaming oh ok didn't know that, i have never opened that Molex. Fastest thing is to ask for replacement if still under warranty
I have the exact same model and I keep getting the Alarm warning
It looks like your water flow is insufficient. The only alarm i get is when the water pump gets accidentally disconnected and therefore there is no water flow
@@fgtechtips that's the thing, the flow meter is installed right next to the pump output. and i still get the alarm. even when I run the pump at 100%
@@SuperCheesyMan weird, if you installed it in the right direction then it could be a defective product ?
@@fgtechtips yeah that's what I fear. But not worth sending it back to AliExpress :/
@@SuperCheesyMan try asking for a refund, at least a partial one.
I thought 1.5l/m was the target flow .. not 3.5 l/m
No it's not the target but it's the actual. The device offers real time reading of your inline flow rate
@@fgtechtips Yes I own the Barrowch flow/temp meter oled display .. I run the my system @ 1.4 .. 1.7.
@@digitallantern593 A d5 pump will have a maxinum flow rate of 26 l/m just by itself. After your loop is finished you should aim for a flow rate of ~3.7 l/m. Anything restrictive in your loop will lower that. Your flow rate is low, you must have a lot of things in your loop.. quick disconnect fittings are a big flow rate killer.
Thanks for review
Thanks for watching !
Is this the latest version?
Yes
Un gadget... carino da vedere, non utile se si desidera estrarre dei dati e passarli alla scheda madre. Alimentazione molex? Ma serio??
Non proprio un gadget ma lo ritengo uno strumento di vitale importanza. Innanzitutto è l'unico strumento che ti permette di misurare e visualizzare in tempo reale la termerarura del liquido di raffreddamento e la velocità del suo flusso all'interno del loop. Ma soprattutto utilissimo l'allarme integrato che mi ha salvato un paio di volte quando avevo inavvertitamente staccato l'alimentazione della pompa
@@fgtechtips se fossimo stati nel 2010 ti avrei dato ragione a mani basse, ma da qualche anno ormai le pompe sono pwm e hanno quantomeno il sensore tachimetrico, si possono collegare direttamente alla scheda madre e sono anche modulabili - persino la mia laing dcc che ha una corrente di spunto di 2A: imposti l'allarme direttamente da BIOS e non hai bisogno di altro. La temperatura? Alcune schede madri hanno dei connettori per collegare una o più sonde termometriche. Le info sul flusso sono relative... Se quest'affare avesse avuto che ne so, un connettore USB per collegarlo alla scheda madre ed ottenere le info almeno sulla temperatura su smbus, allora sarebbe stato in parte utile, perché modulare le ventole in base alla temperatura del liquido è una cosa intelligente da fare. Oltretutto ti dirò la verità: schermino OLED? Considerando il tempo che sta acceso mediamente, Vedrai tra meno di un anno o due se non soffrirà di ghosting...
@@ThomasWinders forse non hai visto che il video è del 2021, lo schermo è perfetto come il primo giorno. La mia pompa è ovviamente pwm ma anche con controllo e regolazione manuale ma non è quello il punto. È sicuramente più comodo vedere tutto in un unico dispositivo direttamente all'interno del case piuttosto che montare sonde separate, usare software di monitoring eccetera eccetera. Discorso diverso se non ti interessa sapere la temperatura del liquido né la velocità del flusso oppure hai il case per terra o non a vista, puoi sicuramente farne a meno. Cmq utilissimo anche nel 2024 fidati ;)
@@fgtechtips dagli ancora qualche tempo, gli oled fanno tutti quella fine specialmente quelli che mostrano sempre la stessa immagine (parlo per esperienza). È un gadget ed è anche carino da vedere, anche se leggere i dati su un display da 2" non è il massimo. E ad onoor del vero il tuo video l'ho trovato perché cercavo una recensione del prodotto, a cui ero interessato. La sicurezza la fai da bios a priori, poi puoi aggiungere per estetica quelli che vuoi... L'unica nota positiva di questo gadget è che non costa un rene, come solitamente fanno gli articoli in fascia enthusiast, ma 30€ è abbastanza onesto come prezzo.
In realtà sbagli, il ghosting non c'entra niente, al limite il problema degli OLED è il burn in, se ti informi sulle TV ad esempio capirai meglio cosa intendo ;) si cmq per questo prezzo stracciato lo trovo stra utile, dopo 3 anni è ancora perfetto
How would you use this to adjust fan curve based on coolant temperature. Is there a plug into T-sensor? Or would you need a stop plug with temperature sensor for that as well
I have this product Just shows temperature, water flow speed and revs per second. If by chance your water pump runs below a specific revs there is an annoying flashing ALERT screen. Any true PC water cooling enthusiuast will NOT like this feature. Abysmal
I never got the alert so far but my pump goes to a minimum of 2lt/min. I got the alert only when the pump was disconnected so I think you have an issue in your loop
Looks good, thanks for the review
Thank you !
@@fgtechtips Hello
I got my unit today
What type of screw in thread nipples must I get inorder to connect my water pipes
Thanks
Ordinary g1/4 i think I explained that in the video ?
@@fgtechtips thanks
Which pump are you using..? TIA
it's a barrow aRGB pump
@@fgtechtips d5 or ddc? Any product link?
Barrow SPB17-V2
a.aliexpress.com/_uivA6o