Hey thank you for this video. I was able to fix my wife break vacuum pump by watching this video. Went to oriely to get magnet like antenna to get loose metals out. Today your my hero
Can you provide a link, or tell me where you orders this from? Or, recommend where I can order one from? Obviously I want the more , upgraded quality part. Love the video. Thanks.
Recently changed replaced this on my wifes 2019 lasted a month now brake booster pressur sensor code came up. Changed it and brakes are hard! Please help?!?!?!
Unfortunately poor design. The new one has a different design completely which solves the premature failure problem. I'm about to replace mine soon, not because it failed, but to reduce the chance of engine failure.
Quick question, is this your veichle, and what are the signs it needs to be replaced, i get an occasionally rattling when stopping, i do want to change rotors and pads since they are 5 years old. It is driving me nuts, I have noticed a small oil leak, but I noticed last time i did a oil change i didn’t put the filter on tight enough and it backed itself off some and it was barely tighter than hand tight. It comes and goes I notice it more when my foot’s off the gas and i’m just rolling down the road at 25-30 mph as im applying the brakes sometimes, i also notice a little loss of power when the AC is running
@@tigerfreek2001 is your brake pedal seem harder to press to stop, that is supposed to be a sign is failing, or oil leaking from bottom of pump. This is my daughters vehicle she planned on purchasing, and I was doing research for her and this is basically only detrimental issue with the motor (besides auto industries bs direct inject design with no wash for intake valves). A lot of people and mechanics claim due to lack of oil change. I recommended to her to use full syn changes at 5k instead of 10k, especially since she has the larger motor with the turbo.
@@philscott9405 I run Ow-20 Mobil 1 extended performance, change at 20-30% life. doesn’t seem harder, is the pump near the pulleys? It sounds like my noise is coming from passenger side which could be a tensioner in thinking or maybe just change the belt it is going on 5 years old this month
Hey thank you for this video. I was able to fix my wife break vacuum pump by watching this video. Went to oriely to get magnet like antenna to get loose metals out. Today your my hero
what about all the broken pieces inside the valve cover ?
Can you provide a link, or tell me where you orders this from? Or, recommend where I can order one from? Obviously I want the more , upgraded quality part. Love the video. Thanks.
from the dealer
Recently changed replaced this on my wifes 2019 lasted a month now brake booster pressur sensor code came up. Changed it and brakes are hard! Please help?!?!?!
I don’t need to silicone the o-ring?
no need
are the new ones they install for the recalled vehicles a better product not to fail again?
better product yes
Run into any leaking issues. I've done like 4 gaskets and it still leaks
Did you install the seal in backwards?
After I'm done do I need to reset or relearn/bleed the pump with a scan tool? Anything special I should know for after I'm done installing it?
no need to reset, just replace it and that it is
Cómo se llama la goma de usa?
what causes them to fail?
Unfortunately poor design. The new one has a different design completely which solves the premature failure problem. I'm about to replace mine soon, not because it failed, but to reduce the chance of engine failure.
Lifting up the car to do oil change at the shop.
Quick question, is this your veichle, and what are the signs it needs to be replaced, i get an occasionally rattling when stopping, i do want to change rotors and pads since they are 5 years old.
It is driving me nuts, I have noticed a small oil leak, but I noticed last time i did a oil change i didn’t put the filter on tight enough and it backed itself off some and it was barely tighter than hand tight.
It comes and goes I notice it more when my foot’s off the gas and i’m just rolling down the road at 25-30 mph as im applying the brakes sometimes, i also notice a little loss of power when the AC is running
@@tigerfreek2001 is your brake pedal seem harder to press to stop, that is supposed to be a sign is failing, or oil leaking from bottom of pump. This is my daughters vehicle she planned on purchasing, and I was doing research for her and this is basically only detrimental issue with the motor (besides auto industries bs direct inject design with no wash for intake valves). A lot of people and mechanics claim due to lack of oil change. I recommended to her to use full syn changes at 5k instead of 10k, especially since she has the larger motor with the turbo.
@@philscott9405 I run Ow-20 Mobil 1 extended performance, change at 20-30% life. doesn’t seem harder, is the pump near the pulleys? It sounds like my noise is coming from passenger side which could be a tensioner in thinking or maybe just change the belt it is going on 5 years old this month
was this making a squealing noise
no
Hola como se llama la goma que usa
What about the metal pieces in the camshaft?
I removed all pieces
@@WissamAbbas How did you remove all of the pieces without removing the cover? and did you re-align the reluctor wheel on the end of the camshaft?
عيب َمصنعي
what causes them to fail?
this pump is damaged by bad engine oil