Is it possible to ride while slammed? Is there a way to adjust it so that I'm close to the ground while riding but not scraping the ground with my pedals. I barely wanna clear the ground but still be lower than stock.
Olá eu sou o Beto. Sou serralheiro artístico gostaria aprender a fazer esse garfo. Gostaria saber se é possível enviar as dimensões e o passo a passo do trabalho
Your bolts holding the fork and crown together are too tight. Undo the 2 bolts and maybe put a little grease on the bolts and then put a washer on before the nut and do them back up.
Yes . U can removed the kickstand. We have the kickstand when the slammer is up we used the kickstand. When the slammer is down we used the pedals to stand the bike
Hello, I'm interested in buying a slammer ,? Just slammer no crown or spring ? How much would it cost , shipping and all , I live in the bay area , Rodeo CA ! Thanks
Any information about lowrider bike parts needed text David 323-309-3989 text only . We specialize on building bicycles for celebrities, movie ,music & photo shoot .
@@itsruf1 Well you see, in the lowrider/car world "slammed" means your car, or truck or whatever you "slammed", is pretty much dragging on the ground. Example: Dude, check that '82 square body, its fuckin' slammed! So if you are from the car world and know the slang of the car world, a "slammer" makes total sense.
Is there a slammer with the twisted round tubes ?
Will the slammer still hit the fender if it’s a straight fork .?
I need 2 may be 3 if the price is right where do I get them shipped to Ontario Canada
What parts am I going to need to buy if I don’t want a slammer but want my bike slammed
They are "Bolts" & "nuts". Not "Screws"
We call them socket heads screws. When you go to your material store... It is a SHCS or HHCS, BHSC etc. A bolt screws. Has threads to screw.
You don’t by any chance know anywhere they sell these do you? I checked what but the sellers discontinued
Is it possible to ride while slammed? Is there a way to adjust it so that I'm close to the ground while riding but not scraping the ground with my pedals. I barely wanna clear the ground but still be lower than stock.
You can ride with it lowered, but you would have to change the cranks 2” smaller to make clearance
Is that a dyno roadster in the background?
do you built your own bike
It can get lowered without hitting the fender I installed new forks and slamster it don't look the same
How many times do we need an explanation of not ending up with a dented bumper?
Firme gracias.
So if I change the 45° with the 90 it will lower? I don't have a crown. So I'm just gonna reuse the same parts
No. The 90 will prevent the slammer from hitting your fender if it went lower. The 45 points the slammer directly to your front fender.
Got a fit of 28" on my custom grandpa bike on my youtube page
Olá eu sou o Beto. Sou serralheiro artístico gostaria aprender a fazer esse garfo. Gostaria saber se é possível enviar as dimensões e o passo a passo do trabalho
Is there any kind of maintenance for when you want to lower an raise? Mines been really hard to move lately
Your bolts holding the fork and crown together are too tight. Undo the 2 bolts and maybe put a little grease on the bolts and then put a washer on before the nut and do them back up.
Figured it out 😎
Can you delete the kickstand so it lays on the pedal to stand the bike up
Yes . U can removed the kickstand.
We have the kickstand when the slammer is up we used the kickstand. When the slammer is down we used the pedals to stand the bike
Mine just stays on the ground it does not go any where
Yo tengo una
How much does the slammer cost with the 90 degree
Text David 323-309-3989
Hello, I'm interested in buying a slammer ,? Just slammer no crown or spring ? How much would it cost , shipping and all , I live in the bay area , Rodeo CA ! Thanks
323-309-3989 text me David
I'm also building bikes as a hobby to do you guys also ship to Texas?
I need one too with twisted round tubes if possible
Any information about lowrider bike parts needed text David 323-309-3989 text only .
We specialize on building bicycles for celebrities, movie ,music & photo shoot .
Is that a drop down fork?
It’s a slammer will drop the front 3 inches “
I have one, I was talking about the fork. Looked different from your average style Im looking for someone that sells slammers
Can you ride the bike when the bike is slammed down??
Some bikes !
Need a couple of those slammers adapters
Where do I buy a Lowrider bike from ?
u can buy frames on offer up, the bikes built are also there.
What does a slammer do?
Lowers the front end
Front fork
👍👍👍👍🇺🇲🇺🇲🇲🇽🇲🇽
"Slammer"? It's a spring. Why a stupid made-up word?
Cause it lowers the front. Did you watch the whole video?
@@DonoldMcPeterson no but why a made up stupid word?
@@itsruf1 Well you see, in the lowrider/car world "slammed" means your car, or truck or whatever you "slammed", is pretty much dragging on the ground.
Example: Dude, check that '82 square body, its fuckin' slammed!
So if you are from the car world and know the slang of the car world, a "slammer" makes total sense.
@@DonoldMcPeterson @ForkSpring - say "fork spring" fast 3 times. That's your new nick name.
@@itsruf1 they didn’t replace the fork spring birdbrain, they replaced the rod inside the the spring. “ the slammer “
No need to put that nut cap when u already screwed in the fork bolt.