Airbrush Not Spraying Paint
Вставка
- Опубліковано 11 чер 2021
- In this video I show you one specific tip which is a common cause of why your Airbrush is not spraying paint.
👉🏻CHECK OUT OUR ONLINE COURSE :
airbrushasylum.thinkific.com
🎥 For more Tip Drying Tips :
• Airbrush Tip Drying | ...
🎥 Learn how to mix your Paint :
• Airbrush Paint Simple ...
🎥 New to Airbrushing start here :
• Most important Beginne...
👕Check out our Merchandise & airbrush related clothing :
teespring.com/stores/airbrush...
**The links below contain affiliate links which means that we receive a small commission for any qualifying sales. Thank You ;)
🎵 Music used in this video by Filmstro, get all your royalty free music by signing up using the following link (affiliate link) :
- filmstro.com/?ref=11220
📺 Want to grow your UA-cam channel ? We use TubeBuddy, try it FREE or select one of their paid plans for more features (affiliate link) :
www.tubebuddy.com/asylumcrew
For more info or to purchase the airbrush shown in this video on Amazon :
Iwata HPCS Eclipse - geni.us/hpcseclipse (AMAZON)
🤔**Want more from Amazon? sign up to a FREE PRIME trial (affiliate link) :
amzn.to/2Gxfdro
Buy from SprayGunner :
spraygunner.com?aff=9
For more info on Trident paints or to purchase online (Australia only) visit :
www.airbrushasylum.com.au/sto...
To purchase Trident paint (international sales) visit :
www.dna-paints.com/trident/?a...
For more artwork, courses and supplies visit us @
www.airbrushasylum.com.au
Affiliate Links to products mentioned in this video :
www.amazon.com/shop/airbrusha...
To view our video explaining our Amazon Influencer page visit :
• Our NEW Amazon Influen...
**The above contain affiliate links which means that we receive a small commission for any qualifying sales. Thank You ;)
#airbrushasylum
🎥 For more Videos like this visit : ua-cam.com/play/PLkd3s0ymmV0PG4F12QxTtfQidJowG_q9C.html
I have done this so many times and STILL no paint comes out, or it comes out for a split second and then nothing. I have cleaned the tip time and time, again. I've adjusted pressure up AND down. I've experimented with thinning paints. I spend more time trying to get my airbrush to work, than I do actually painting my models.
same :(
I've had the same issue. I tried a different approach - I kept the trigger pressed and pulled all the way back. Then, I pulled the needle out from the airbrush from behind until I saw some paint spray out.
Seems to work so far..
Best fix I've found is just buying a new gun lol
@@UnexpectedDanger lol can't agree more. Less stress
I'm the same
So tonight i spent an hour disassembling my airbrush unit part for part with all the correct brushes and cleaners. Put it all back together to find there was no paint coming out. Spent the last hour wondering why to find the screw just wasn’t tight enough to bring the needle back 😂😂😂 thankyou sir for the video! Literally saved me a migraine! Haha 🙌🏼🙌🏼
Just got my airbrush back out from a long hiatus and had this exact problem. Thanks for a concise, well-produced tutorial!
Thank you so much for this amazing video. I was panicking, but I followed your instructions and now my airbrush works!
Thank you so so much for these tips. For me it was the first problem you mentioned the screw ones. And its finally working now
My airbrush has been out of commission for 2 YEARS and this video literally fixed it in 1 minute. Thank you sm.
This video is literally everything I've wanted to hear more about since buying my airbrush in 2017. This is immediately my favorite hobby channel.
I'm just starting airbrushing (painting dioramas) and these videos of yours have been excellent in giving me a good understanding of how everything works. :) thanks
Thank you so much for this, I couldn't figure out what I had done after stripping my airbrush and your video helped me realize never re-installed the needle nut. 🤦🏻♂
THANK YOU. This tip really should be in the Iwata instructions booklet. Drove me crazy, but this really helped.
Can’t thank you enough for this video. I spent an hour using lacquer thinner and airbrush cleaner trying to clean my airbrush thinking it is clogged somewhere as the needle won’t move. Almost thought I had to get a new cleaning set. Apparently I just didn’t tighten the back enough.
Me this morning lol😭 left my air brush at work but I’m trying again tmr. I hope this works
great video man this has helped me so much, i had this exact problem and i had no idea why it was happening and it was the needle. thank you very much you saved me a few hundred bucks.
thanks so much! It was the "tip drying" that did it for me. All fixed now. Appreciate you!
you legend! I'm a complete scrub and thought I'd knackered my airbrush shortly after receiving it as a present from my wife. fixed it tonight thanks to this video!
This 📹 has just Saved my Whole Life !!!! My Entire Life !!! I was freaking out thinking I needed a new gun. Such a simple fix. Thank youuuu!!! 😄😄😄
New airbrush (cheap portable compressor type) ; chuck nut is fine - needle moves; trigger lever appears to work fine, water based paint is thin - have tried water. Have cleaned it. Even the water doesn't spray.
Thanks for doing the video. I’m new to the airbrush and you answered numerous questions that I had in one go.
Fantastic glad this video has helped 👍🏻
This just saved my entire afternoon! Thank you so much!
Thank you straight to the point…these 30 mins videos were killin me lol
I just got the same brush. Love it. Awesome content as well.
Omg thank you so much!!!! I was losing my mind wondering why I couldn’t get anything to come out when I kept cleaning and reassembling!!!
i’ve spent the last month or so trying to get my airbrush to spray anything for it just to be the first tip THANK YOU!!!
Glad the video helped all the best with your airbrushing 🤩🤘🏻
Thank you so much my friend. I was about to send my air brush back to amazon!! ☺️
Thank you I wasn’t Sure if the nut has to be tight or not but now my brush works great
Thanks man it seems that the first issue was what plagued me for some times now, even though I still have issue with getting the needle out of the air brush. Have a good day
Good concise advice, thank you. 👍
Thank you! I was cleaning and troubling shooting for awhile and it was a simple fix of tightening the back XD
Thank you! Fixed my issue immediately
Great video. I’m a beginner and it really helped.
Thanks a lot for this tip! It could have saved me buying a new airbrush if I would have looked up the problem sooner. I cleaned my airbrush because no paint was coming out anymore so I thought I have dried up paint in there (which might have been true), and after putting it together there was still no paint coming out... I thought my airbrush died (it's kinda old) so I ordered a new pistol... and again, no paint... that's when I finally looked up the problem and found this video, which solved the the issue for BOTH airbrush pistols.
Thank you! First solution worked for me
Great video as per usual, I use a Iwata TRN1 and when I pull the trigger for air I get nothing but it sprays paint fine. Any ideas for the reason it is doing it, thanks in advance. Michael.
thank's lot, im newbie in this hobbie snd my aero was blocked, this video help me for understand the aero mechanism.
Thank advice worked like a charm , 🎉🎉🎉 👍🏽 it was the first example
Thank you so much for this video! Fixed the issue for me in seconds. 🙏 👍
No probs happy it helped 🤩👍🏻
Thanks man! The first thing was exactly my problem.
Thank u.. Very much.. It's really helps.. Love it
Thank you for sharing your knowledge. Great videos.
Helo! Your videos are great, and they help me a lot. Thank you so much for them. Sorry for my English, it's really bad. Greetings from Brazil
No probs thanks for your comment and glad you found this video helpful 👍🏻
Hi I'm new to airbrushing world now the only part i struggle with is paint ratio as I use tamiya or revell paints
Many thanks Andy
Thank you soo much for this😊
Your video saved me a big huge headache. The minute you said tighten your screw in the pen it worked like a charm in seconds! Thank you so much for posting this! I'm sure other artists are saying the same! 😊
thanks so much for your comment and glad my video helped 👍
Thank you! Saved a newbie!
Thanks man worked for me
Yay! My paint finally came out after month of trouble shooting everything and cleaning absolutely every piece of my guns. Thank you!!!!
Worked great thanks!
Thank you for your guidance, teacher
Thank you so much!
Thank you so much you help me a lot
Thank you so much for this video it really helped me
This was helpful! My problem was that the paint sprayed without me pulling the trigger. Thank you for the tip it solved the issue.
Thank you very much for somes useful tips!
Hi mate, Thanks for your video. I've just recently purchased an airbrush and found this video really helpful, especially with the issue on tighening the rear locknut. However an issue I have now, is that the paint will come out a little bit, then stop and only air will come through. If I block the nozzle, a few bubbles appear in the paint cup, but then nothing. Any ideas on what may be causing this?
Cheers
awesome vid thanks so much !
Absolutely saved me thank you
I have a iwata revolution cr (japan made) its brand new and so am I to airbrushes the paints are createx colors wicked colors ready to spray at 20psi set with the air valve (trigger) full open. now the problem I cant get the paint to spray with out pulling trigger and letting off over and over or pulling it to full on it also wont spray a nice thin line I did try reducer 4 drops paint to 1 drop reducer help just a little when I doubled than it came out little better put made splatter spots. the tip don't look bent from what I can see an it did came with what they say is a test spray and it looks great I have cleaned an oiled it. is it possible the tip was ground off center or something any clues.. thanks
Thank you!
Thank you this was very helpful
That fixed my problem! TY!
Thank you!!!
Thank you!!!! This really saved me🎉
thanks mate, i need this
Thanks alot!
I have the issue where where the vallejo primer used come out perfectly at 25psi. Now it doesnt come out i habe to loosen the neddle cap so it sprays. Ive cleaned the parts with everything and it keeps not working. I dont know what else to do. When i habe the cap all the way no paint sprays and the air is very weak. When i loosen it too much it bubbles the paint pot. I don't know what else to do. It worked perfectly fine for a week and then this has ben going on. Inhabe the iwata neo. It said the recommended psi is 15-20 but thays very low. Its so frustrating cause i bought it to prime amdpaint models instead of buying primer cans and at this point im too deep in
You’re doing gods work sir.🫡
Great help thanks
Question I m new and just bought patriot 105 I had to by the adapter but the gun only sprays single action? Push button down and paint comes out. No air only?
Excellent video friend 👏🏻👏🏻👏🏻👏🏻 thank you so much. Regards 👍🏻
Thanks this realllly works👍🏾👍🏾👍🏾
You're welcome👍
Thank you so much! Once i tightened the nut it sprayed perfectly! New sub!
Thank you so much glad the video helped 👍🏻
Thx! The first thing help XD
and i was re asembling this thing like 6 times alredy
Quick question, can anyone tell me if air brushes can be used for powdered pigments? So just a powder base add-in, thanks.
Very good explanation and detaiied video.👍
Can l use a makeup airbrush for painting cakes or there is airbrush for makeup and other for cake design. Please answer me
How do cleaning solvents such as Windex, alcohol and mineral spirits affect the rubber o-rings in the air brush? Thank you for the vlog.
Thanks helped a lot!
A while back I was using a Paache talon airbrush and it would bubble paint up through the trigger assembly. Paint going the right way was 50/50. Sometimes it would still spray forwards and backwards up the trigger. Other times it was only out the wrong end. Never managed to get it to permanently stop and never found a concrete explanation why it happened. Ended up getting a different brush in the end.
Great video. Thanks for sharing, I'm beginner! HOLA from MEXICO......!!
Omg omg thank you soooo much.. I have a Harder&Steenbeck Evolution CR Plus airbrush and only used it 3x and only for a bit...I cleaned it, took it apart ..and notta, did what you said and walla,
No probs at all happy the video helped 😉👍🏻
Thanks for sharing this should help🤙🏽
Thank you
Yes thank you!!!
thanks!
Thanks alot this was very helpful, I was stranded! with a new airbrush. Problem solved!
I'm pretty good with my eclipse and infinity these days because I'm always super thin in the mix...but I still have problems with tip dry because of my inability to learn how to avoid bursts like that...they just feel don't natural doing what I do with an airbrush.
Is it necessary to to make absolutely certain that I go air > air + paint > air all in the one smooth motion or can it be sufficient to burst air and paint in one motion and then very quickly depress down just for air to prevent dry trip?
I've tried learning a motion that finished with just air but have yet to be able to do it when actually airbrushing miniatures. Trying it results in a lot of paint where I don't want it because I have to think about it, slowing me down. It's this awkward dance of spraying paint when I don't want to be while I take time to think about going forward to make sure I do with just air. It's a lot more unnatural feeling that the bursting :(...
Could there be anymore issues? No matter what i do it seems like nothing wants to come out unless the pressure is way too high and then it just looks like crap
Thank you very much!!!!
No probs thanks for the comment 👍🏻
Thanks you’re awesome!
Thank you Thank you 😊
Saved me!! 🙋🏻♀️ The needle wasn’t moving. Too new at this I guess!! Hahaha. Thank you!!
Thanks
On my double action airbrush, when I release the lever in the air-only position, it may take 5-7 seconds for the air to shut off. Is there a fix for this?
What about when your paint is already super thin but it's still not spraying ? Like trident fluro paint, although it doesnt need thinning I still think by 20-30%. My other guns spray it but my brand new airbrush doesnt.. no tip drying, the needle moves back, paints thinned but still no paint lol, I'm confused and frustrated.
Thank you I fixed it 😊😊😊
I have just started to airbrush and I use the neo for iwata. I bought myself a paint thinner and thinned acrylic paint with it. It was very fluid and had a milky consistence. First problem was, there was only paint coming out, when i pulled the trigger button very far back. So i could only do thick paint lines with the airbrush. When pressing down for thinner lines, nothing came out. Then I thought about maybe still haveing mixed the colour too thick and cleaned everything. I have now watched plenty of videos about my airbrush and have taken it all apart, putting it back together, thousand times. Everything looks fine, as in your video, but now there is no paint coming out at all anymore. Not even when pulling the trigger to the very back. I'm very frustrated and scared, that I could have ruined everything bc there might be paint in the part at the front where its rly hard to come at with even the thinnest cleaning tool. Pls tell me that I have not broken it and that i can get the paint out of there somehow. I have put it now in a mix of glasscleaner and scouring milk. I'll let it sit in there over night and hope it works again. But can you break an airbrush when using a little too thick paint maybe?
OH MY GOD THANK YOU SO MUCH
I am having a big problem, I use a Tamiya Spray-Work 74545, and I cleaned it real well and put it away for a while and when I got it out again to use it will not let any air out. I took it apart and soaked it in cleaner for a day, cleaned it and put it back together, and still the same thing. I checked the airflow valve on the bottom of the brush and it was working fine. Any idea what is going on?
Total noob here. Thank you so much! This really helped!
Thank you so much
No probs glad you enjoyed it 🤩👍🏻