Thank you I did as per your instructions and it works well (AtomStack S30) . I am realy able to connect Lightburn to my machine without usb cable. Great, thanks again.
I did this through my phone and downloaded the .gz file and uploaded it and once i did that, I can no longer connect to my atom stack a20 pro, it says Content Encoding Error every time i try to connect to that Ip now. I dont know how to connect o it now. I lost that function after uploading the .gz file.
I too tried, I changed everything as mention in the video with the blue interface, made all the changes and still the connection stays as AP even though my list of changes show as correct in $s
Здравствуйте, пробовал подключить Atomstack x40 pro ни чего не получается, через браузер ввожу айпишник вроде как происходит подключение, а на странице ничего не отображается может особенность прошивки китайцы закрыли доступ
yes, maybe I'm stupid, but my PC doesn't see the wifi from the Atomstack, my mobile phone can receive the wifi signal but my PC can't, what's the problem?
The Atomstack support writes to me that you can only connect the laser to the phone and not to the PC and yet it works for you but not for me, I don't see a Wi-Fi signal on my PC
I have the same problem. I can see it on my phone and tried and uploaded that .gz file and now with my phone it says content encoding error and I can no longer connect via the ip address.
@@TheWaterMagister So, I have used the same USB wifi adapter, I have also tried it on another computer, I have also tried it with a Raspberry Pi and everywhere the same result, I can ping it but in the browser the message "This URI does not exist" Maybe we don't have the same Atomstack controller, my controller is an Atomstack AIC1 BUT without a reset button. Which controller do you have on the laser?
@@PedroGomes_27 Yeah, I actually replace it with the one shown here but I still missing the SSID and password options, i gave up and used an old laptop connected via usb :(
@@JosephMorganVerne I wanted that version, I have the version on the video but I can’t put nothing to engrave, I can see the files but I can’t press nothing to engrave them
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
You are amazing. Finally, I succeeded to connect my X20 to my wifi. I searched alot for solutions but nothing work. You are an engineer, Thanks alot!
Thank you
I did as per your instructions and it works well (AtomStack S30) . I am realy able to connect Lightburn to my machine without usb cable.
Great, thanks again.
You are amazing. Finally, I succeeded to connect my atomstack a10 pro to my wifi. I searched alot for solutions but nothing work. Thanks alot!
Everyone can connect Atomstack to the PC via Wifi but I can't and Atomstack support says it doesn't work, only on smartphone app, how do you do it ?
Hi, do you think this would work for the Atomstack A5 please?
Здравствуй, чтобы вернуть настройки на заводские нужно в ESP3D прописать: ATOMSTACK_ пароль(12345678)? и радиомод - Acsess point? Спасибо.
I did this through my phone and downloaded the .gz file and uploaded it and once i did that, I can no longer connect to my atom stack a20 pro, it says Content Encoding Error every time i try to connect to that Ip now. I dont know how to connect o it now. I lost that function after uploading the .gz file.
I too tried, I changed everything as mention in the video with the blue interface, made all the changes and still the connection stays as AP even though my list of changes show as correct in $s
Здравствуйте, пробовал подключить Atomstack x40 pro ни чего не получается, через браузер ввожу айпишник вроде как происходит подключение, а на странице ничего не отображается может особенность прошивки китайцы закрыли доступ
Thank you.
yes, maybe I'm stupid, but my PC doesn't see the wifi from the Atomstack, my mobile phone can receive the wifi signal but my PC can't, what's the problem?
The Atomstack support writes to me that you can only connect the laser to the phone and not to the PC and yet it works for you but not for me, I don't see a Wi-Fi signal on my PC
I have the same problem. I can see it on my phone and tried and uploaded that .gz file and now with my phone it says content encoding error and I can no longer connect via the ip address.
@@TheWaterMagister So, I have used the same USB wifi adapter, I have also tried it on another computer, I have also tried it with a Raspberry Pi and everywhere the same result, I can ping it but in the browser the message "This URI does not exist" Maybe we don't have the same Atomstack controller, my controller is an Atomstack AIC1 BUT without a reset button.
Which controller do you have on the laser?
yo I have A70 model and when I go to the server 192.168.4.1, I get the error 'This URI doesn't exist'
Mi too
@@jelenailjaka the function is not anymore possible ...
Thanks alot!
Awesome!
thanks bro
It’s asking me for a password
My interface it's different:(
you got the blue and white interface?
@@PedroGomes_27 Yeah, I actually replace it with the one shown here but I still missing the SSID and password options, i gave up and used an old laptop connected via usb :(
@@JosephMorganVerne I wanted that version, I have the version on the video but I can’t put nothing to engrave, I can see the files but I can’t press nothing to engrave them